From: Peter De Schrijver <pdeschrijver@nvidia.com>
To: <pdeschrijver@nvidia.com>
Cc: Grant Likely <grant.likely@secretlab.ca>,
Rob Herring <rob.herring@calxeda.com>,
Rob Landley <rob@landley.net>,
Stephen Warren <swarren@wwwdotorg.org>,
Russell King <linux@arm.linux.org.uk>,
Prashant Gaikwad <pgaikwad@nvidia.com>,
Simon Glass <sjg@chromium.org>,
Mike Turquette <mturquette@linaro.org>,
Joseph Lo <josephl@nvidia.com>,
<devicetree-discuss@lists.ozlabs.org>,
<linux-doc@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<linux-tegra@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>
Subject: [PATCH v5 02/10] clk: tegra: Add TEGRA_PLL_BYPASS flag
Date: Fri, 1 Feb 2013 12:18:31 +0200 [thread overview]
Message-ID: <1359713962-16822-3-git-send-email-pdeschrijver@nvidia.com> (raw)
In-Reply-To: <1359713962-16822-1-git-send-email-pdeschrijver@nvidia.com>
Not all PLLs in Tegra114 have a bypass bit. Adapt the common code to only use
this bit when available.
Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
---
drivers/clk/tegra/clk-pll.c | 15 ++++++++++-----
drivers/clk/tegra/clk.h | 8 +++++---
2 files changed, 15 insertions(+), 8 deletions(-)
diff --git a/drivers/clk/tegra/clk-pll.c b/drivers/clk/tegra/clk-pll.c
index 912c977..3c3a25e 100644
--- a/drivers/clk/tegra/clk-pll.c
+++ b/drivers/clk/tegra/clk-pll.c
@@ -166,7 +166,8 @@ static void _clk_pll_enable(struct clk_hw *hw)
clk_pll_enable_lock(pll);
val = pll_readl_base(pll);
- val &= ~PLL_BASE_BYPASS;
+ if (pll->flags & TEGRA_PLL_BYPASS)
+ val &= ~PLL_BASE_BYPASS;
val |= PLL_BASE_ENABLE;
pll_writel_base(val, pll);
@@ -183,7 +184,9 @@ static void _clk_pll_disable(struct clk_hw *hw)
u32 val;
val = pll_readl_base(pll);
- val &= ~(PLL_BASE_BYPASS | PLL_BASE_ENABLE);
+ if (pll->flags & TEGRA_PLL_BYPASS)
+ val &= ~PLL_BASE_BYPASS;
+ val &= ~PLL_BASE_ENABLE;
pll_writel_base(val, pll);
if (pll->flags & TEGRA_PLLM) {
@@ -454,7 +457,7 @@ static unsigned long clk_pll_recalc_rate(struct clk_hw *hw,
val = pll_readl_base(pll);
- if (val & PLL_BASE_BYPASS)
+ if ((pll->flags & TEGRA_PLL_BYPASS) && (val & PLL_BASE_BYPASS))
return parent_rate;
if ((pll->flags & TEGRA_PLL_FIXED) && !(val & PLL_BASE_OVERRIDE)) {
@@ -660,9 +663,10 @@ static struct clk *_tegra_clk_register_pll(const char *name,
struct clk *tegra_clk_register_pll(const char *name, const char *parent_name,
void __iomem *clk_base, void __iomem *pmc,
unsigned long flags, unsigned long fixed_rate,
- struct tegra_clk_pll_params *pll_params, u8 pll_flags,
+ struct tegra_clk_pll_params *pll_params, u32 pll_flags,
struct tegra_clk_pll_freq_table *freq_table, spinlock_t *lock)
{
+ pll_flags |= TEGRA_PLL_BYPASS;
return _tegra_clk_register_pll(name, parent_name, clk_base, pmc,
flags, fixed_rate, pll_params, pll_flags, freq_table,
lock, &tegra_clk_pll_ops);
@@ -671,9 +675,10 @@ struct clk *tegra_clk_register_pll(const char *name, const char *parent_name,
struct clk *tegra_clk_register_plle(const char *name, const char *parent_name,
void __iomem *clk_base, void __iomem *pmc,
unsigned long flags, unsigned long fixed_rate,
- struct tegra_clk_pll_params *pll_params, u8 pll_flags,
+ struct tegra_clk_pll_params *pll_params, u32 pll_flags,
struct tegra_clk_pll_freq_table *freq_table, spinlock_t *lock)
{
+ pll_flags |= TEGRA_PLL_BYPASS;
return _tegra_clk_register_pll(name, parent_name, clk_base, pmc,
flags, fixed_rate, pll_params, pll_flags, freq_table,
lock, &tegra_clk_plle_ops);
diff --git a/drivers/clk/tegra/clk.h b/drivers/clk/tegra/clk.h
index a09d7dc..3cff1df 100644
--- a/drivers/clk/tegra/clk.h
+++ b/drivers/clk/tegra/clk.h
@@ -182,12 +182,13 @@ struct tegra_clk_pll_params {
* TEGRA_PLL_FIXED - We are not supposed to change output frequency
* of some plls.
* TEGRA_PLLE_CONFIGURE - Configure PLLE when enabling.
+ * TEGRA_PLL_BYPASS - PLL has bypass bit
*/
struct tegra_clk_pll {
struct clk_hw hw;
void __iomem *clk_base;
void __iomem *pmc;
- u8 flags;
+ u32 flags;
unsigned long fixed_rate;
spinlock_t *lock;
u8 divn_shift;
@@ -210,18 +211,19 @@ struct tegra_clk_pll {
#define TEGRA_PLLM BIT(5)
#define TEGRA_PLL_FIXED BIT(6)
#define TEGRA_PLLE_CONFIGURE BIT(7)
+#define TEGRA_PLL_BYPASS BIT(8)
extern const struct clk_ops tegra_clk_pll_ops;
extern const struct clk_ops tegra_clk_plle_ops;
struct clk *tegra_clk_register_pll(const char *name, const char *parent_name,
void __iomem *clk_base, void __iomem *pmc,
unsigned long flags, unsigned long fixed_rate,
- struct tegra_clk_pll_params *pll_params, u8 pll_flags,
+ struct tegra_clk_pll_params *pll_params, u32 pll_flags,
struct tegra_clk_pll_freq_table *freq_table, spinlock_t *lock);
struct clk *tegra_clk_register_plle(const char *name, const char *parent_name,
void __iomem *clk_base, void __iomem *pmc,
unsigned long flags, unsigned long fixed_rate,
- struct tegra_clk_pll_params *pll_params, u8 pll_flags,
+ struct tegra_clk_pll_params *pll_params, u32 pll_flags,
struct tegra_clk_pll_freq_table *freq_table, spinlock_t *lock);
/**
next prev parent reply other threads:[~2013-02-01 10:21 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-02-01 10:18 [PATCH v5 00/10] Tegra114 clockframework Peter De Schrijver
2013-02-01 10:18 ` [PATCH v5 01/10] clk: tegra: Refactor PLL programming code Peter De Schrijver
2013-02-04 6:06 ` Prashant Gaikwad
2013-02-04 14:32 ` Peter De Schrijver
2013-02-05 5:42 ` Prashant Gaikwad
2013-02-05 13:23 ` Peter De Schrijver
2013-02-06 12:32 ` Peter De Schrijver
2013-02-04 21:57 ` Stephen Warren
2013-02-01 10:18 ` Peter De Schrijver [this message]
2013-02-04 6:13 ` [PATCH v5 02/10] clk: tegra: Add TEGRA_PLL_BYPASS flag Prashant Gaikwad
2013-02-01 10:18 ` [PATCH v5 03/10] clk: tegra: Add PLL post divider table Peter De Schrijver
2013-02-04 6:28 ` Prashant Gaikwad
2013-02-01 10:18 ` [PATCH v5 04/10] clk: tegra: Add new fields and PLL types for Tegra114 Peter De Schrijver
2013-02-01 19:40 ` Rhyland Klein
2013-02-04 6:35 ` Prashant Gaikwad
2013-02-04 10:37 ` Peter De Schrijver
2013-02-01 10:18 ` [PATCH v5 05/10] clk: tegra: Add flags to tegra_clk_periph() Peter De Schrijver
2013-02-04 6:33 ` Prashant Gaikwad
2013-02-01 10:18 ` [PATCH v5 06/10] clk: tegra: Workaround for Tegra114 MSENC problem Peter De Schrijver
2013-02-04 6:39 ` Prashant Gaikwad
2013-02-01 10:18 ` [PATCH v5 07/10] ARM: tegra: Define Tegra114 CAR binding Peter De Schrijver
2013-02-04 21:16 ` Stephen Warren
2013-02-01 10:18 ` [PATCH v5 08/10] ARM: dt: Add references to tegra_car clocks Peter De Schrijver
2013-02-04 6:45 ` Prashant Gaikwad
2013-02-01 10:18 ` [PATCH v5 09/10] clk: tegra: Implement clocks for Tegra114 Peter De Schrijver
2013-02-04 7:08 ` Prashant Gaikwad
2013-02-04 10:45 ` Peter De Schrijver
2013-02-04 14:07 ` Peter De Schrijver
2013-02-04 21:01 ` Stephen Warren
2013-02-07 16:18 ` Peter De Schrijver
2013-02-04 14:34 ` Peter De Schrijver
2013-02-05 5:36 ` Prashant Gaikwad
2013-02-01 10:18 ` [PATCH v5 10/10] clk: tegra: devicetree match for nvidia,tegra114-car Peter De Schrijver
2013-02-04 7:10 ` Prashant Gaikwad
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1359713962-16822-3-git-send-email-pdeschrijver@nvidia.com \
--to=pdeschrijver@nvidia.com \
--cc=devicetree-discuss@lists.ozlabs.org \
--cc=grant.likely@secretlab.ca \
--cc=josephl@nvidia.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-doc@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-tegra@vger.kernel.org \
--cc=linux@arm.linux.org.uk \
--cc=mturquette@linaro.org \
--cc=pgaikwad@nvidia.com \
--cc=rob.herring@calxeda.com \
--cc=rob@landley.net \
--cc=sjg@chromium.org \
--cc=swarren@wwwdotorg.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®