From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1755759Ab3BDL6T (ORCPT ); Mon, 4 Feb 2013 06:58:19 -0500 Received: from mail-wg0-f45.google.com ([74.125.82.45]:61632 "EHLO mail-wg0-f45.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1755697Ab3BDL6M (ORCPT ); Mon, 4 Feb 2013 06:58:12 -0500 From: Lee Jones To: linux-kernel@vger.kernel.org, broonie@opensource.wolfsonmicro.com Cc: Lee Jones Subject: [PATCH 71/73] regulator: ab8500: Remove the need for a 'delay' property Date: Mon, 4 Feb 2013 11:54:26 +0000 Message-Id: <1359978868-28736-72-git-send-email-lee.jones@linaro.org> X-Mailer: git-send-email 1.7.9.5 In-Reply-To: <1359978868-28736-1-git-send-email-lee.jones@linaro.org> References: <1359978868-28736-1-git-send-email-lee.jones@linaro.org> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org The regulator framework now has provisions to read a regulator's start-up time via the 'enable_time' attribute. So let's remove all 'enable_time'/'delay' duplication and just stick with 'enable_time' from now on. Signed-off-by: Lee Jones --- drivers/regulator/ab8500.c | 8 +------- 1 file changed, 1 insertion(+), 7 deletions(-) diff --git a/drivers/regulator/ab8500.c b/drivers/regulator/ab8500.c index 8ec5c4f..193bfda 100644 --- a/drivers/regulator/ab8500.c +++ b/drivers/regulator/ab8500.c @@ -63,7 +63,6 @@ struct ab8500_shared_mode { * @voltage_reg: register to control regulator voltage * @voltage_mask: mask to control regulator voltage * @voltage_shift: shift to control regulator voltage - * @delay: startup/set voltage delay in us */ struct ab8500_regulator_info { struct device *dev; @@ -87,7 +86,6 @@ struct ab8500_regulator_info { u8 voltage_reg; u8 voltage_mask; u8 voltage_shift; - unsigned int delay; struct { u8 voltage_limit; u8 voltage_bank; @@ -652,7 +650,7 @@ static int ab8500_regulator_set_voltage_time_sel(struct regulator_dev *rdev, { struct ab8500_regulator_info *info = rdev_get_drvdata(rdev); - return info->delay; + return info->desc.enable_time; } static struct regulator_ops ab8500_regulator_volt_mode_ops = { @@ -829,7 +827,6 @@ static struct ab8500_regulator_info .volt_table = fixed_2000000_voltage, .enable_time = 500, }, - .delay = 500, .load_lp_uA = 1000, .update_bank = 0x03, .update_reg = 0x80, @@ -1099,7 +1096,6 @@ static struct ab8500_regulator_info .volt_table = fixed_2000000_voltage, .enable_time = 10000, }, - .delay = 10000, .load_lp_uA = 1000, .update_bank = 0x03, .update_reg = 0x80, @@ -1364,7 +1360,6 @@ static struct ab8500_regulator_info .volt_table = fixed_2000000_voltage, .enable_time = 10000, }, - .delay = 10000, .load_lp_uA = 1000, .update_bank = 0x03, .update_reg = 0x80, @@ -1661,7 +1656,6 @@ static struct ab8500_regulator_info .n_voltages = 1, .enable_time = 10000, }, - .delay = 10000, .load_lp_uA = 1000, .update_bank = 0x03, .update_reg = 0x80, -- 1.7.9.5