From: Mark Brown <broonie@opensource.wolfsonmicro.com>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Chanwoo Choi <cw00.choi@samsung.com>,
MyungJoo Ham <myungjoo.ham@samsung.com>
Cc: linux-kernel@vger.kernel.org,
patches@opensource.wolfsonmicro.com,
Mark Brown <broonie@opensource.wolfsonmicro.com>
Subject: [PATCH 05/11] extcon: arizona: Use regulated mode for microphone supply when detecting
Date: Mon, 11 Feb 2013 16:27:00 +0000 [thread overview]
Message-ID: <1360600026-16878-5-git-send-email-broonie@opensource.wolfsonmicro.com> (raw)
In-Reply-To: <1360600026-16878-1-git-send-email-broonie@opensource.wolfsonmicro.com>
When starting microphone detection some headsets should be exposed to
the fully regulated microphone bias in order to ensure that they behave
in an optimal fashion.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
drivers/extcon/Kconfig | 2 +-
drivers/extcon/extcon-arizona.c | 93 +++++++++++++++++++++++++++++++++++++
include/linux/mfd/arizona/pdata.h | 3 ++
3 files changed, 97 insertions(+), 1 deletion(-)
diff --git a/drivers/extcon/Kconfig b/drivers/extcon/Kconfig
index 07122a9..9377050 100644
--- a/drivers/extcon/Kconfig
+++ b/drivers/extcon/Kconfig
@@ -47,7 +47,7 @@ config EXTCON_MAX8997
config EXTCON_ARIZONA
tristate "Wolfson Arizona EXTCON support"
- depends on MFD_ARIZONA && INPUT
+ depends on MFD_ARIZONA && INPUT && SND_SOC
help
Say Y here to enable support for external accessory detection
with Wolfson Arizona devices. These are audio CODECs with
diff --git a/drivers/extcon/extcon-arizona.c b/drivers/extcon/extcon-arizona.c
index d7e1047..aa72431 100644
--- a/drivers/extcon/extcon-arizona.c
+++ b/drivers/extcon/extcon-arizona.c
@@ -27,6 +27,8 @@
#include <linux/regulator/consumer.h>
#include <linux/extcon.h>
+#include <sound/soc.h>
+
#include <linux/mfd/arizona/core.h>
#include <linux/mfd/arizona/pdata.h>
#include <linux/mfd/arizona/registers.h>
@@ -113,6 +115,52 @@ static void arizona_extcon_set_mode(struct arizona_extcon_info *info, int mode)
dev_dbg(arizona->dev, "Set jack polarity to %d\n", mode);
}
+static const char *arizona_extcon_get_micbias(struct arizona_extcon_info *info)
+{
+ switch (info->micd_modes[0].bias >> ARIZONA_MICD_BIAS_SRC_SHIFT) {
+ case 1:
+ return "MICBIAS1";
+ case 2:
+ return "MICBIAS2";
+ case 3:
+ return "MICBIAS3";
+ default:
+ return "MICVDD";
+ }
+}
+
+static void arizona_extcon_pulse_micbias(struct arizona_extcon_info *info)
+{
+ struct arizona *arizona = info->arizona;
+ const char *widget = arizona_extcon_get_micbias(info);
+ struct snd_soc_dapm_context *dapm = arizona->dapm;
+ int ret;
+
+ mutex_lock(&dapm->card->dapm_mutex);
+
+ ret = snd_soc_dapm_force_enable_pin(dapm, widget);
+ if (ret != 0)
+ dev_warn(arizona->dev, "Failed to enable %s: %d\n",
+ widget, ret);
+
+ mutex_unlock(&dapm->card->dapm_mutex);
+
+ snd_soc_dapm_sync(dapm);
+
+ if (!arizona->pdata.micd_force_micbias) {
+ mutex_lock(&dapm->card->dapm_mutex);
+
+ ret = snd_soc_dapm_disable_pin(arizona->dapm, widget);
+ if (ret != 0)
+ dev_warn(arizona->dev, "Failed to disable %s: %d\n",
+ widget, ret);
+
+ mutex_unlock(&dapm->card->dapm_mutex);
+
+ snd_soc_dapm_sync(dapm);
+ }
+}
+
static void arizona_start_mic(struct arizona_extcon_info *info)
{
struct arizona *arizona = info->arizona;
@@ -122,6 +170,15 @@ static void arizona_start_mic(struct arizona_extcon_info *info)
/* Microphone detection can't use idle mode */
pm_runtime_get(info->dev);
+ if (info->detecting) {
+ ret = regulator_allow_bypass(info->micvdd, false);
+ if (ret != 0) {
+ dev_err(arizona->dev,
+ "Failed to regulate MICVDD: %d\n",
+ ret);
+ }
+ }
+
ret = regulator_enable(info->micvdd);
if (ret != 0) {
dev_err(arizona->dev, "Failed to enable MICVDD: %d\n",
@@ -138,6 +195,8 @@ static void arizona_start_mic(struct arizona_extcon_info *info)
ARIZONA_ACCESSORY_DETECT_MODE_1,
ARIZONA_ACCDET_MODE_MASK, ARIZONA_ACCDET_MODE_MIC);
+ arizona_extcon_pulse_micbias(info);
+
regmap_update_bits_check(arizona->regmap, ARIZONA_MIC_DETECT_1,
ARIZONA_MICD_ENA, ARIZONA_MICD_ENA,
&change);
@@ -150,18 +209,39 @@ static void arizona_start_mic(struct arizona_extcon_info *info)
static void arizona_stop_mic(struct arizona_extcon_info *info)
{
struct arizona *arizona = info->arizona;
+ const char *widget = arizona_extcon_get_micbias(info);
+ struct snd_soc_dapm_context *dapm = arizona->dapm;
bool change;
+ int ret;
regmap_update_bits_check(arizona->regmap, ARIZONA_MIC_DETECT_1,
ARIZONA_MICD_ENA, 0,
&change);
+ mutex_lock(&dapm->card->dapm_mutex);
+
+ ret = snd_soc_dapm_disable_pin(dapm, widget);
+ if (ret != 0)
+ dev_warn(arizona->dev,
+ "Failed to disable %s: %d\n",
+ widget, ret);
+
+ mutex_unlock(&dapm->card->dapm_mutex);
+
+ snd_soc_dapm_sync(dapm);
+
if (info->micd_reva) {
regmap_write(arizona->regmap, 0x80, 0x3);
regmap_write(arizona->regmap, 0x294, 2);
regmap_write(arizona->regmap, 0x80, 0x0);
}
+ ret = regulator_allow_bypass(info->micvdd, true);
+ if (ret != 0) {
+ dev_err(arizona->dev, "Failed to bypass MICVDD: %d\n",
+ ret);
+ }
+
if (change) {
regulator_disable(info->micvdd);
pm_runtime_mark_last_busy(info->dev);
@@ -564,6 +644,8 @@ static void arizona_start_hpdet_acc_id(struct arizona_extcon_info *info)
info->hpdet_active = true;
+ arizona_extcon_pulse_micbias(info);
+
ret = regmap_update_bits(arizona->regmap, 0x225, 0x4000, 0x4000);
if (ret != 0)
dev_warn(arizona->dev, "Failed to do magic: %d\n", ret);
@@ -649,6 +731,13 @@ static irqreturn_t arizona_micdet(int irq, void *data)
dev_err(arizona->dev, "Headset report failed: %d\n",
ret);
+ /* Don't need to regulate for button detection */
+ ret = regulator_allow_bypass(info->micvdd, false);
+ if (ret != 0) {
+ dev_err(arizona->dev, "Failed to bypass MICVDD: %d\n",
+ ret);
+ }
+
info->mic = true;
info->detecting = false;
goto handled;
@@ -716,6 +805,7 @@ static irqreturn_t arizona_micdet(int irq, void *data)
input_report_key(info->input,
arizona_lvl_to_key[i].report, 0);
input_sync(info->input);
+ arizona_extcon_pulse_micbias(info);
}
handled:
@@ -817,6 +907,9 @@ static int arizona_extcon_probe(struct platform_device *pdev)
int jack_irq_fall, jack_irq_rise;
int ret, mode, i;
+ if (!arizona->dapm || !arizona->dapm->card)
+ return -EPROBE_DEFER;
+
pdata = dev_get_platdata(arizona->dev);
info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
diff --git a/include/linux/mfd/arizona/pdata.h b/include/linux/mfd/arizona/pdata.h
index 2f5f08e..f824175 100644
--- a/include/linux/mfd/arizona/pdata.h
+++ b/include/linux/mfd/arizona/pdata.h
@@ -117,6 +117,9 @@ struct arizona_pdata {
/** Mic detect debounce level */
int micd_dbtime;
+ /** Force MICBIAS on for mic detect */
+ bool micd_force_micbias;
+
/** Headset polarity configurations */
struct arizona_micd_config *micd_configs;
int num_micd_configs;
--
1.7.10.4
next prev parent reply other threads:[~2013-02-11 16:28 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-02-11 16:26 [PATCH 00/11] extcon-arizona updates Mark Brown
2013-02-11 16:26 ` [PATCH 01/11] extcon: arizona: Disable debouce for accessory removal detection Mark Brown
2013-02-11 16:26 ` [PATCH 02/11] extcon: arizona: Retry failed HP measurements Mark Brown
2013-02-11 16:26 ` [PATCH 03/11] extcon: arizona: Remove duplicate rate configuration Mark Brown
2013-02-11 16:26 ` [PATCH 04/11] extcon: arizona: Support additional configuration of microphone detection Mark Brown
2013-02-11 16:27 ` Mark Brown [this message]
2013-02-11 16:27 ` [PATCH 06/11] extcon: arizona: Remove extra jack flip increment Mark Brown
2013-02-11 16:27 ` [PATCH 07/11] extcon: arizona: Add some debounce time before starting HPDET identification Mark Brown
2013-02-11 16:27 ` [PATCH 08/11] extcon: arizona: Don't HPDET magic when headphones are enabled Mark Brown
2013-02-11 16:27 ` [PATCH 09/11] extcon: arizona: Clear _trig_sts bits after jack detection Mark Brown
2013-02-11 16:27 ` [PATCH 10/11] extcon: arizona: Always take the first HPDET reading as the final one Mark Brown
2013-02-11 16:27 ` [PATCH 11/11] extcon: arizona: Use MICDET for final microphone identification Mark Brown
2013-02-11 21:45 ` [PATCH 00/11] extcon-arizona updates Greg Kroah-Hartman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1360600026-16878-5-git-send-email-broonie@opensource.wolfsonmicro.com \
--to=broonie@opensource.wolfsonmicro.com \
--cc=cw00.choi@samsung.com \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=myungjoo.ham@samsung.com \
--cc=patches@opensource.wolfsonmicro.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®