From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1161025Ab3BNW1R (ORCPT ); Thu, 14 Feb 2013 17:27:17 -0500 Received: from moutng.kundenserver.de ([212.227.126.186]:61954 "EHLO moutng.kundenserver.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1030268Ab3BNW1N (ORCPT ); Thu, 14 Feb 2013 17:27:13 -0500 From: Arnd Bergmann To: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org, Arnd Bergmann , Prashant Gaikwad , Maxime Ripard , Mike Turquette Subject: [PATCH 3/9] clk: sunxi: remove stale Makefile entry Date: Thu, 14 Feb 2013 23:26:52 +0100 Message-Id: <1360880818-4071454-4-git-send-email-arnd@arndb.de> X-Mailer: git-send-email 1.8.1.2 In-Reply-To: <1360880818-4071454-1-git-send-email-arnd@arndb.de> References: <1360880818-4071454-1-git-send-email-arnd@arndb.de> X-Provags-ID: V02:K0:FOlEvnxYGbTkVrkkj8SHmmn49QTrPvi8ocFpTVkRUNj 3YxvV6ICp7PG+Y+ZcP4QE3iXOU79Nsxj2O4WhoA+yTqmEfy7X/ 3MCbMsM5J9hLw8cOLpgW41B8YklIdu+IuOcOB8D6kqHzykou13 QWQ8cQjHD+SHAFuay1rxxDGNHojwjU6z5o293xOlPEVrK460u8 K13XpOh1q8cnk85njqMegQd5OqIDOmGFTQddFrPxBgLT5ZXr18 EpeJf+ljbvxdi+y2dpX8cz3qfLR4Bbfo2i9dP+jxKdE8ZU96Iu iellkIbPDoR98rjLCLDy4f77qWE860Hj/l3ToRXOSgcmNiJX3d m212ImpN42Qph8OGjeZu1yJanEbTSRcT9aJF51Vpg Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Patch 85a18198 "clk: sunxi: Use common of_clk_init() function" removed the clk-sunxi.c file but left the Makefile entry, which causes a build error in multi_v7_defconfig: make[4]: *** No rule to make target `drivers/clk/clk-sunxi.o', needed by `drivers/clk/built-in.o'. The obvious fix is to remove the extraneous line from the Makefile. Signed-off-by: Arnd Bergmann Cc: Prashant Gaikwad Cc: Maxime Ripard Cc: Mike Turquette --- drivers/clk/Makefile | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile index ce77077..be9392e 100644 --- a/drivers/clk/Makefile +++ b/drivers/clk/Makefile @@ -25,7 +25,6 @@ endif obj-$(CONFIG_MACH_LOONGSON1) += clk-ls1x.o obj-$(CONFIG_ARCH_U8500) += ux500/ obj-$(CONFIG_ARCH_VT8500) += clk-vt8500.o -obj-$(CONFIG_ARCH_SUNXI) += clk-sunxi.o obj-$(CONFIG_ARCH_ZYNQ) += clk-zynq.o obj-$(CONFIG_X86) += x86/ obj-$(CONFIG_ARCH_TEGRA) += tegra/ -- 1.8.1.2