From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1161596Ab3BOMrS (ORCPT ); Fri, 15 Feb 2013 07:47:18 -0500 Received: from mail-wg0-f41.google.com ([74.125.82.41]:58422 "EHLO mail-wg0-f41.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1161556Ab3BOMrJ (ORCPT ); Fri, 15 Feb 2013 07:47:09 -0500 From: Lee Jones To: linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org Cc: arnd@arndb.de, linus.walleij@stericsson.com, cbouatmailru@gmail.com, sameo@linux.intel.com, lme00437 , Benoit GAUTHIER , Lee Jones Subject: [PATCH 39/40] ab8500-fg: Change current calculation Date: Fri, 15 Feb 2013 12:45:09 +0000 Message-Id: <1360932310-30065-40-git-send-email-lee.jones@linaro.org> X-Mailer: git-send-email 1.7.10.4 In-Reply-To: <1360932310-30065-1-git-send-email-lee.jones@linaro.org> References: <1360932310-30065-1-git-send-email-lee.jones@linaro.org> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org From: lme00437 This patch updates the gas gauge constant for electric current calculation according to hardware specification. Signed-off-by: Benoit GAUTHIER Signed-off-by: Lee Jones Reviewed-by: Marcus COOPER Reviewed-by: Philippe LANGLAIS Tested-by: Benoit GAUTHIER --- drivers/power/ab8500_fg.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/power/ab8500_fg.c b/drivers/power/ab8500_fg.c index 7de5333..4968061 100644 --- a/drivers/power/ab8500_fg.c +++ b/drivers/power/ab8500_fg.c @@ -36,7 +36,7 @@ #define MILLI_TO_MICRO 1000 #define FG_LSB_IN_MA 1627 -#define QLSB_NANO_AMP_HOURS_X10 1129 +#define QLSB_NANO_AMP_HOURS_X10 1071 #define INS_CURR_TIMEOUT (3 * HZ) #define SEC_TO_SAMPLE(S) (S * 4) @@ -672,11 +672,11 @@ int ab8500_fg_inst_curr_finalize(struct ab8500_fg *di, int *res) /* * Convert to unit value in mA * Full scale input voltage is - * 66.660mV => LSB = 66.660mV/(4096*res) = 1.627mA + * 63.160mV => LSB = 63.160mV/(4096*res) = 1.542mA * Given a 250ms conversion cycle time the LSB corresponds - * to 112.9 nAh. Convert to current by dividing by the conversion + * to 107.1 nAh. Convert to current by dividing by the conversion * time in hours (250ms = 1 / (3600 * 4)h) - * 112.9nAh assumes 10mOhm, but fg_res is in 0.1mOhm + * 107.1nAh assumes 10mOhm, but fg_res is in 0.1mOhm */ val = (val * QLSB_NANO_AMP_HOURS_X10 * 36 * 4) / (1000 * di->bm->fg_res); -- 1.7.10.4