From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1757069Ab3BWDvw (ORCPT ); Fri, 22 Feb 2013 22:51:52 -0500 Received: from mail-ye0-f176.google.com ([209.85.213.176]:59614 "EHLO mail-ye0-f176.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754840Ab3BWDvs (ORCPT ); Fri, 22 Feb 2013 22:51:48 -0500 From: Thiago Farina To: linux-kernel@vger.kernel.org Cc: Mark Brown , Liam Girdwood Subject: [PATCH 2/2] regulators: max8998.c: use dev_err() instead of printk() Date: Sat, 23 Feb 2013 00:51:26 -0300 Message-Id: <1361591486-12663-1-git-send-email-tfarina@chromium.org> X-Mailer: git-send-email 1.8.1.151.g32238ae Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Fixes the following checkpatch warning: WARNING: Prefer netdev_err(netdev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... Signed-off-by: Thiago Farina --- drivers/regulator/max8998.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/regulator/max8998.c b/drivers/regulator/max8998.c index faeb7e8..a57a1b1 100644 --- a/drivers/regulator/max8998.c +++ b/drivers/regulator/max8998.c @@ -666,7 +666,7 @@ static int max8998_pmic_probe(struct platform_device *pdev) /* Check if SET1 is not equal to 0 */ if (!pdata->buck1_set1) { dev_err(&pdev->dev, - "MAX8998 SET1 GPIO defined as 0 !\n"); + "MAX8998 SET1 GPIO defined as 0 !\n"); WARN_ON(!pdata->buck1_set1); ret = -EIO; goto err_out; @@ -674,7 +674,7 @@ static int max8998_pmic_probe(struct platform_device *pdev) /* Check if SET2 is not equal to 0 */ if (!pdata->buck1_set2) { dev_err(&pdev->dev, - "MAX8998 SET2 GPIO defined as 0 !\n"); + "MAX8998 SET2 GPIO defined as 0 !\n"); WARN_ON(!pdata->buck1_set2); ret = -EIO; goto err_out; @@ -740,7 +740,8 @@ static int max8998_pmic_probe(struct platform_device *pdev) if (gpio_is_valid(pdata->buck2_set3)) { /* Check if SET3 is not equal to 0 */ if (!pdata->buck2_set3) { - printk(KERN_ERR "MAX8998 SET3 GPIO defined as 0 !\n"); + dev_err(&pdev->dev, + "MAX8998 SET3 GPIO defined as 0 !\n"); WARN_ON(!pdata->buck2_set3); ret = -EIO; goto err_out; -- 1.8.1.151.g32238ae