mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Jiri Slaby <jslaby@suse.cz>
To: linville@tuxdriver.com
Cc: linux-wireless@vger.kernel.org, ath5k-devel@venema.h4ckr.net,
	mcgrof@qca.qualcomm.com, jirislaby@gmail.com,
	linux-kernel@vger.kernel.org
Subject: [PATCH] ath5k: cleanup channel to eprom_mode function
Date: Mon, 25 Feb 2013 15:36:48 +0100	[thread overview]
Message-ID: <1361803008-18494-1-git-send-email-jslaby@suse.cz> (raw)

Stop returning negative values from ath5k_eeprom_mode_from_channel.
Yell loudly about that case in that function instead and return the
default/zero/mode A. This cleans up the callers, but needs to pass ah
down to ath5k_eeprom_mode_from_channel for ATH5K_WARN. For that
purpose we also need the declaration to be moved to ath5k.h.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
 drivers/net/wireless/ath/ath5k/ath5k.h  |  3 ++-
 drivers/net/wireless/ath/ath5k/eeprom.c |  6 ++++--
 drivers/net/wireless/ath/ath5k/eeprom.h |  3 ---
 drivers/net/wireless/ath/ath5k/phy.c    | 20 +++-----------------
 drivers/net/wireless/ath/ath5k/reset.c  |  4 +---
 5 files changed, 10 insertions(+), 26 deletions(-)

diff --git a/drivers/net/wireless/ath/ath5k/ath5k.h b/drivers/net/wireless/ath/ath5k/ath5k.h
index 3150def..2d691b8 100644
--- a/drivers/net/wireless/ath/ath5k/ath5k.h
+++ b/drivers/net/wireless/ath/ath5k/ath5k.h
@@ -1523,7 +1523,8 @@ int ath5k_hw_dma_stop(struct ath5k_hw *ah);
 /* EEPROM access functions */
 int ath5k_eeprom_init(struct ath5k_hw *ah);
 void ath5k_eeprom_detach(struct ath5k_hw *ah);
-
+int ath5k_eeprom_mode_from_channel(struct ath5k_hw *ah,
+		struct ieee80211_channel *channel);
 
 /* Protocol Control Unit Functions */
 /* Helpers */
diff --git a/drivers/net/wireless/ath/ath5k/eeprom.c b/drivers/net/wireless/ath/ath5k/eeprom.c
index b7e0258..94d34ee 100644
--- a/drivers/net/wireless/ath/ath5k/eeprom.c
+++ b/drivers/net/wireless/ath/ath5k/eeprom.c
@@ -1779,7 +1779,8 @@ ath5k_eeprom_detach(struct ath5k_hw *ah)
 }
 
 int
-ath5k_eeprom_mode_from_channel(struct ieee80211_channel *channel)
+ath5k_eeprom_mode_from_channel(struct ath5k_hw *ah,
+		struct ieee80211_channel *channel)
 {
 	switch (channel->hw_value) {
 	case AR5K_MODE_11A:
@@ -1789,6 +1790,7 @@ ath5k_eeprom_mode_from_channel(struct ieee80211_channel *channel)
 	case AR5K_MODE_11B:
 		return AR5K_EEPROM_MODE_11B;
 	default:
-		return -1;
+		ATH5K_WARN(ah, "channel is not A/B/G!");
+		return AR5K_EEPROM_MODE_11A;
 	}
 }
diff --git a/drivers/net/wireless/ath/ath5k/eeprom.h b/drivers/net/wireless/ath/ath5k/eeprom.h
index 94a9bbe..693296e 100644
--- a/drivers/net/wireless/ath/ath5k/eeprom.h
+++ b/drivers/net/wireless/ath/ath5k/eeprom.h
@@ -493,6 +493,3 @@ struct ath5k_eeprom_info {
 	/* Antenna raw switch tables */
 	u32	ee_antenna[AR5K_EEPROM_N_MODES][AR5K_ANT_MAX];
 };
-
-int
-ath5k_eeprom_mode_from_channel(struct ieee80211_channel *channel);
diff --git a/drivers/net/wireless/ath/ath5k/phy.c b/drivers/net/wireless/ath/ath5k/phy.c
index a78afa9..d6bc7cb 100644
--- a/drivers/net/wireless/ath/ath5k/phy.c
+++ b/drivers/net/wireless/ath/ath5k/phy.c
@@ -1612,11 +1612,7 @@ ath5k_hw_update_noise_floor(struct ath5k_hw *ah)
 
 	ah->ah_cal_mask |= AR5K_CALIBRATION_NF;
 
-	ee_mode = ath5k_eeprom_mode_from_channel(ah->ah_current_channel);
-	if (WARN_ON(ee_mode < 0)) {
-		ah->ah_cal_mask &= ~AR5K_CALIBRATION_NF;
-		return;
-	}
+	ee_mode = ath5k_eeprom_mode_from_channel(ah, ah->ah_current_channel);
 
 	/* completed NF calibration, test threshold */
 	nf = ath5k_hw_read_measured_noise_floor(ah);
@@ -2317,12 +2313,7 @@ ath5k_hw_set_antenna_mode(struct ath5k_hw *ah, u8 ant_mode)
 
 	def_ant = ah->ah_def_ant;
 
-	ee_mode = ath5k_eeprom_mode_from_channel(channel);
-	if (ee_mode < 0) {
-		ATH5K_ERR(ah,
-			"invalid channel: %d\n", channel->center_freq);
-		return;
-	}
+	ee_mode = ath5k_eeprom_mode_from_channel(ah, channel);
 
 	switch (ant_mode) {
 	case AR5K_ANTMODE_DEFAULT:
@@ -3622,12 +3613,7 @@ ath5k_hw_txpower(struct ath5k_hw *ah, struct ieee80211_channel *channel,
 		return -EINVAL;
 	}
 
-	ee_mode = ath5k_eeprom_mode_from_channel(channel);
-	if (ee_mode < 0) {
-		ATH5K_ERR(ah,
-			"invalid channel: %d\n", channel->center_freq);
-		return -EINVAL;
-	}
+	ee_mode = ath5k_eeprom_mode_from_channel(ah, channel);
 
 	/* Initialize TX power table */
 	switch (ah->ah_radio) {
diff --git a/drivers/net/wireless/ath/ath5k/reset.c b/drivers/net/wireless/ath/ath5k/reset.c
index e2d8b2c..a3399c4 100644
--- a/drivers/net/wireless/ath/ath5k/reset.c
+++ b/drivers/net/wireless/ath/ath5k/reset.c
@@ -984,9 +984,7 @@ ath5k_hw_commit_eeprom_settings(struct ath5k_hw *ah,
 	if (ah->ah_version == AR5K_AR5210)
 		return;
 
-	ee_mode = ath5k_eeprom_mode_from_channel(channel);
-	if (WARN_ON(ee_mode < 0))
-		return;
+	ee_mode = ath5k_eeprom_mode_from_channel(ah, channel);
 
 	/* Adjust power delta for channel 14 */
 	if (channel->center_freq == 2484)
-- 
1.8.1.4



             reply	other threads:[~2013-02-25 14:37 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-02-25 14:36 Jiri Slaby [this message]
2013-02-26 11:13 ` Nick Kossifidis

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1361803008-18494-1-git-send-email-jslaby@suse.cz \
    --to=jslaby@suse.cz \
    --cc=ath5k-devel@venema.h4ckr.net \
    --cc=jirislaby@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-wireless@vger.kernel.org \
    --cc=linville@tuxdriver.com \
    --cc=mcgrof@qca.qualcomm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®