From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S933214Ab3B0Alt (ORCPT ); Tue, 26 Feb 2013 19:41:49 -0500 Received: from eusmtp01.atmel.com ([212.144.249.243]:24094 "EHLO eusmtp01.atmel.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S933097Ab3B0Alq (ORCPT ); Tue, 26 Feb 2013 19:41:46 -0500 From: Wenyou Yang To: CC: , , , , , , , Subject: [PATCH Resend v5 03/16] spi/spi-atmel: add support transfer on CS1,2,3, not only on CS0 Date: Wed, 27 Feb 2013 08:39:34 +0800 Message-ID: <1361925574-12023-1-git-send-email-wenyou.yang@atmel.com> X-Mailer: git-send-email 1.7.9.5 In-Reply-To: <1361925297-11854-1-git-send-email-wenyou.yang@atmel.com> References: <1361925297-11854-1-git-send-email-wenyou.yang@atmel.com> MIME-Version: 1.0 Content-Type: text/plain Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Signed-off-by: Wenyou Yang Cc: spi-devel-general@lists.sourceforge.net Cc: linux-kernel@vger.kernel.org --- drivers/spi/spi-atmel.c | 25 ++++++++++++------------- 1 file changed, 12 insertions(+), 13 deletions(-) diff --git a/drivers/spi/spi-atmel.c b/drivers/spi/spi-atmel.c index a8e091b..9c8f2d5 100644 --- a/drivers/spi/spi-atmel.c +++ b/drivers/spi/spi-atmel.c @@ -256,11 +256,6 @@ static bool atmel_spi_is_v2(struct atmel_spi *as) * Master on Chip Select 0.") No workaround exists for that ... so for * nCS0 on that chip, we (a) don't use the GPIO, (b) can't support CS_HIGH, * and (c) will trigger that first erratum in some cases. - * - * TODO: Test if the atmel_spi_is_v2() branch below works on - * AT91RM9200 if we use some other register than CSR0. However, don't - * do this unconditionally since AP7000 has an errata where the BITS - * field in CSR0 overrides all other CSRs. */ static void cs_activate(struct atmel_spi *as, struct spi_device *spi) @@ -270,18 +265,22 @@ static void cs_activate(struct atmel_spi *as, struct spi_device *spi) u32 mr; if (atmel_spi_is_v2(as)) { - /* - * Always use CSR0. This ensures that the clock - * switches to the correct idle polarity before we - * toggle the CS. + spi_writel(as, CSR0 + 4 * spi->chip_select, asd->csr); + /* For the low SPI version, there is a issue that PDC transfer + * on CS1,2,3 needs SPI_CSR0.BITS config as SPI_CSR1,2,3.BITS */ spi_writel(as, CSR0, asd->csr); if (as->caps.has_wdrbt) { - spi_writel(as, MR, SPI_BF(PCS, 0x0e) | SPI_BIT(WDRBT) - | SPI_BIT(MODFDIS) | SPI_BIT(MSTR)); + spi_writel(as, MR, + SPI_BF(PCS, ~(0x01 << spi->chip_select)) + | SPI_BIT(WDRBT) + | SPI_BIT(MODFDIS) + | SPI_BIT(MSTR)); } else { - spi_writel(as, MR, SPI_BF(PCS, 0x0e) | SPI_BIT(MODFDIS) - | SPI_BIT(MSTR)); + spi_writel(as, MR, + SPI_BF(PCS, ~(0x01 << spi->chip_select)) + | SPI_BIT(MODFDIS) + | SPI_BIT(MSTR)); } mr = spi_readl(as, MR); gpio_set_value(asd->npcs_pin, active); -- 1.7.9.5