From: "Bjørn Mork" <bjorn@mork.no>
To: linux-usb@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, fangxiaozhi@huawei.com,
zihan@huawei.com, Lin.Lei@huawei.com,
"Greg KH" <gregkh@linuxfoundation.org>,
neil.yi@huawei.com, wangyuhua@huawei.com, huqiao36@huawei.com,
balbi@ti.com, mdharm-usb@one-eyed-alien.net,
sebastian@breakpoint.cc, "Bjørn Mork" <bjorn@mork.no>,
stable <stable@vger.kernel.org>
Subject: [PATCH] USB: storage: fix Huawei mode switching regression
Date: Mon, 4 Mar 2013 14:19:21 +0100 [thread overview]
Message-ID: <1362403161-23501-1-git-send-email-bjorn@mork.no> (raw)
In-Reply-To: <87obezs888.fsf@nemi.mork.no>
This reverts commit 200e0d99 ("USB: storage: optimize to match the
Huawei USB storage devices and support new switch command" and the
followup bugfix commit cd060956 ("USB: storage: properly handle
the endian issues of idProduct").
The commit effectively added a large number of Huawei devices to
the deprecated usb-storage mode switching logic. Many of these
devices have been in use and supported by the userspace
usb_modeswitch utility for years. Forcing the switching inside
the kernel causes a number of regressions as a result of ignoring
existing onfigurations, and also completely takes away the ability
to configure mode switching per device/system/user.
Known regressions caused by this:
- Some of the devices support multiple modes, using different
switching commands. There are existing configurations taking
advantage of this.
- There is a real use case for disabling mode switching and
instead mounting the exposed storage device. This becomes
impossible with switching logic inside the usb-storage driver.
- At least on device fail as a result of the usb-storage switching
command, becoming completely unswitchable. This is possibly a
firmware bug, but still a regression because the device work as
expected using usb_modeswitch defaults.
In-kernel mode switching was deprecated years ago with the
development of the more user friendly userspace alternatives. The
existing list of devices in usb-storage was only kept to prevent
breaking already working systems. The long term plan is to remove
the list, not to add to it. Ref:
http://permalink.gmane.org/gmane.linux.usb.general/28543
Cc: <fangxiaozhi@huawei.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
---
I just realized that this already had gone into maintained stable
series', making the fix so much more urgent. This needs to be
reverted before it starts hitting innocent distro users. So I
am sending the patch now instead of waiting for Huawei to respond.
Bjørn
drivers/usb/storage/initializers.c | 76 +--------
drivers/usb/storage/initializers.h | 4 +-
drivers/usb/storage/unusual_devs.h | 329 +++++++++++++++++++++++++++++++++++-
3 files changed, 331 insertions(+), 78 deletions(-)
diff --git a/drivers/usb/storage/initializers.c b/drivers/usb/storage/initializers.c
index 7ab9046..105d900 100644
--- a/drivers/usb/storage/initializers.c
+++ b/drivers/usb/storage/initializers.c
@@ -92,8 +92,8 @@ int usb_stor_ucr61s2b_init(struct us_data *us)
return 0;
}
-/* This places the HUAWEI usb dongles in multi-port mode */
-static int usb_stor_huawei_feature_init(struct us_data *us)
+/* This places the HUAWEI E220 devices in multi-port mode */
+int usb_stor_huawei_e220_init(struct us_data *us)
{
int result;
@@ -104,75 +104,3 @@ static int usb_stor_huawei_feature_init(struct us_data *us)
US_DEBUGP("Huawei mode set result is %d\n", result);
return 0;
}
-
-/*
- * It will send a scsi switch command called rewind' to huawei dongle.
- * When the dongle receives this command at the first time,
- * it will reboot immediately. After rebooted, it will ignore this command.
- * So it is unnecessary to read its response.
- */
-static int usb_stor_huawei_scsi_init(struct us_data *us)
-{
- int result = 0;
- int act_len = 0;
- struct bulk_cb_wrap *bcbw = (struct bulk_cb_wrap *) us->iobuf;
- char rewind_cmd[] = {0x11, 0x06, 0x20, 0x00, 0x00, 0x01, 0x01, 0x00,
- 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00};
-
- bcbw->Signature = cpu_to_le32(US_BULK_CB_SIGN);
- bcbw->Tag = 0;
- bcbw->DataTransferLength = 0;
- bcbw->Flags = bcbw->Lun = 0;
- bcbw->Length = sizeof(rewind_cmd);
- memset(bcbw->CDB, 0, sizeof(bcbw->CDB));
- memcpy(bcbw->CDB, rewind_cmd, sizeof(rewind_cmd));
-
- result = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe, bcbw,
- US_BULK_CB_WRAP_LEN, &act_len);
- US_DEBUGP("transfer actual length=%d, result=%d\n", act_len, result);
- return result;
-}
-
-/*
- * It tries to find the supported Huawei USB dongles.
- * In Huawei, they assign the following product IDs
- * for all of their mobile broadband dongles,
- * including the new dongles in the future.
- * So if the product ID is not included in this list,
- * it means it is not Huawei's mobile broadband dongles.
- */
-static int usb_stor_huawei_dongles_pid(struct us_data *us)
-{
- struct usb_interface_descriptor *idesc;
- int idProduct;
-
- idesc = &us->pusb_intf->cur_altsetting->desc;
- idProduct = le16_to_cpu(us->pusb_dev->descriptor.idProduct);
- /* The first port is CDROM,
- * means the dongle in the single port mode,
- * and a switch command is required to be sent. */
- if (idesc && idesc->bInterfaceNumber == 0) {
- if ((idProduct == 0x1001)
- || (idProduct == 0x1003)
- || (idProduct == 0x1004)
- || (idProduct >= 0x1401 && idProduct <= 0x1500)
- || (idProduct >= 0x1505 && idProduct <= 0x1600)
- || (idProduct >= 0x1c02 && idProduct <= 0x2202)) {
- return 1;
- }
- }
- return 0;
-}
-
-int usb_stor_huawei_init(struct us_data *us)
-{
- int result = 0;
-
- if (usb_stor_huawei_dongles_pid(us)) {
- if (le16_to_cpu(us->pusb_dev->descriptor.idProduct) >= 0x1446)
- result = usb_stor_huawei_scsi_init(us);
- else
- result = usb_stor_huawei_feature_init(us);
- }
- return result;
-}
diff --git a/drivers/usb/storage/initializers.h b/drivers/usb/storage/initializers.h
index 5376d4f..529327f 100644
--- a/drivers/usb/storage/initializers.h
+++ b/drivers/usb/storage/initializers.h
@@ -46,5 +46,5 @@ int usb_stor_euscsi_init(struct us_data *us);
* flash reader */
int usb_stor_ucr61s2b_init(struct us_data *us);
-/* This places the HUAWEI usb dongles in multi-port mode */
-int usb_stor_huawei_init(struct us_data *us);
+/* This places the HUAWEI E220 devices in multi-port mode */
+int usb_stor_huawei_e220_init(struct us_data *us);
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index 72923b5..d305a5a 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -1527,10 +1527,335 @@ UNUSUAL_DEV( 0x1210, 0x0003, 0x0100, 0x0100,
/* Reported by fangxiaozhi <huananhu@huawei.com>
* This brings the HUAWEI data card devices into multi-port mode
*/
-UNUSUAL_VENDOR_INTF(0x12d1, 0x08, 0x06, 0x50,
+UNUSUAL_DEV( 0x12d1, 0x1001, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
- USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_init,
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1003, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1004, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1401, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1402, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1403, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1404, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1405, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1406, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1407, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1408, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1409, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x140A, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x140B, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x140C, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x140D, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x140E, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x140F, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1410, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1411, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1412, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1413, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1414, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1415, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1416, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1417, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1418, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1419, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x141A, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x141B, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x141C, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x141D, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x141E, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x141F, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1420, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1421, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1422, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1423, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1424, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1425, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1426, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1427, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1428, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1429, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x142A, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x142B, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x142C, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x142D, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x142E, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x142F, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1430, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1431, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1432, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1433, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1434, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1435, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1436, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1437, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1438, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1439, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x143A, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x143B, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x143C, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x143D, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x143E, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x143F, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
0),
/* Reported by Vilius Bilinkevicius <vilisas AT xxx DOT lt) */
--
1.7.10.4
next prev parent reply other threads:[~2013-03-04 13:20 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-02-04 7:16 [PATCH 2/2]linux-usb:optimize to match the Huawei USB storage devices and support new switch command fangxiaozhi 00110321
2013-03-04 11:41 ` v3.8 regression: Huawei mode switching fails (was Re: [PATCH 2/2]linux-usb:optimize to match the Huawei USB storage devices and support new switch command) Bjørn Mork
2013-03-04 13:19 ` Bjørn Mork [this message]
2013-03-04 14:29 ` [PATCH] USB: storage: fix Huawei mode switching regression Ben Hutchings
2013-03-04 16:47 ` Bjørn Mork
2013-03-04 16:59 ` Matthew Dharm
2013-03-04 19:22 ` Bjørn Mork
2013-03-04 22:28 ` Josua Dietze
2013-03-05 8:32 ` Oliver Neukum
2013-03-05 11:35 ` Bjørn Mork
2013-03-05 2:15 ` Fangxiaozhi (Franko)
2013-03-05 10:07 ` Bjørn Mork
2013-03-05 11:52 ` Oliver Neukum
2013-03-05 14:08 ` Bjørn Mork
2013-03-06 1:34 ` 答复: " Linlei (Lei Lin)
2013-03-06 1:44 ` Greg KH
2013-03-06 15:45 ` Dan Williams
2013-03-07 2:54 ` Fangxiaozhi (Franko)
2013-03-07 3:18 ` Greg KH
2013-03-07 12:19 ` Bjørn Mork
2013-03-07 14:11 ` Josua Dietze
2013-03-05 2:28 ` v3.8 regression: Huawei mode switching fails (was Re: [PATCH 2/2]linux-usb:optimize to match the Huawei USB storage devices and support new switch command) Fangxiaozhi (Franko)
2013-03-05 8:48 ` Oliver Neukum
2013-03-05 9:05 ` Fangxiaozhi (Franko)
2013-03-05 12:23 ` Bjørn Mork
2013-03-06 1:40 ` greg
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1362403161-23501-1-git-send-email-bjorn@mork.no \
--to=bjorn@mork.no \
--cc=Lin.Lei@huawei.com \
--cc=balbi@ti.com \
--cc=fangxiaozhi@huawei.com \
--cc=gregkh@linuxfoundation.org \
--cc=huqiao36@huawei.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=mdharm-usb@one-eyed-alien.net \
--cc=neil.yi@huawei.com \
--cc=sebastian@breakpoint.cc \
--cc=stable@vger.kernel.org \
--cc=wangyuhua@huawei.com \
--cc=zihan@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®