[PATCH] usb/gadget: initialize gadget functions helper befor functions & gadgets

[Sebastian Andrzej Siewior <sebastian@breakpoint.cc>]

Fengguang Wu run into a kernel ops after he complied dummy_hcd and g_cdc
into the kernel. The problem was that u_serial was used by g_cdc before
u_serial was initialized. In the module case eveything is initialized in
the correct order but if we compile it into the kernel we rely on
Makefile order which I did wrong and now I correct this.

Cc: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
---
I kinda assumed that this was already fixed (i.e. a patch like this was sent)
but it seems not to be that case.

 drivers/usb/gadget/Makefile |   12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile
index 97a13c3..1ded3d4 100644
--- a/drivers/usb/gadget/Makefile
+++ b/drivers/usb/gadget/Makefile
@@ -35,6 +35,12 @@ mv_udc-y			:= mv_udc_core.o
 obj-$(CONFIG_USB_FUSB300)	+= fusb300_udc.o
 obj-$(CONFIG_USB_MV_U3D)	+= mv_u3d_core.o
 
+# USB Functions
+obj-$(CONFIG_USB_U_SERIAL)	+= u_serial.o
+obj-$(CONFIG_USB_F_ACM)		+= f_acm.o
+f_ss_lb-y			:= f_loopback.o f_sourcesink.o
+obj-$(CONFIG_USB_F_SS_LB)	+= f_ss_lb.o
+
 #
 # USB gadget drivers
 #
@@ -74,9 +80,3 @@ obj-$(CONFIG_USB_G_WEBCAM)	+= g_webcam.o
 obj-$(CONFIG_USB_G_NCM)		+= g_ncm.o
 obj-$(CONFIG_USB_G_ACM_MS)	+= g_acm_ms.o
 obj-$(CONFIG_USB_GADGET_TARGET)	+= tcm_usb_gadget.o
-
-# USB Functions
-obj-$(CONFIG_USB_F_ACM)		+= f_acm.o
-f_ss_lb-y			:= f_loopback.o f_sourcesink.o
-obj-$(CONFIG_USB_F_SS_LB)	+= f_ss_lb.o
-obj-$(CONFIG_USB_U_SERIAL)	+= u_serial.o
-- 
1.7.10.4