From: Thomas Abraham <thomas.abraham@linaro.org>
To: linux-kernel@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org,
linux-samsung-soc@vger.kernel.org, linus.walleij@linaro.org,
kgene.kim@samsung.com, t.figa@samsung.com, patches@linaro.org
Subject: [PATCH v2 1/3] pinctrl: exynos: add exynos5250 SoC specific data
Date: Wed, 06 Mar 2013 16:48:30 +0530 [thread overview]
Message-ID: <1362568712-13586-2-git-send-email-thomas.abraham@linaro.org> (raw)
In-Reply-To: <1362568712-13586-1-git-send-email-thomas.abraham@linaro.org>
Add Samsung Exynos5250 SoC specific data to enable pinctrl support for
all platforms based on Exynos5250.
Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
---
drivers/pinctrl/pinctrl-exynos.c | 108 +++++++++++++++++++++++++++++++++++++
drivers/pinctrl/pinctrl-samsung.c | 2 +
drivers/pinctrl/pinctrl-samsung.h | 1 +
3 files changed, 111 insertions(+), 0 deletions(-)
diff --git a/drivers/pinctrl/pinctrl-exynos.c b/drivers/pinctrl/pinctrl-exynos.c
index 538b9dd..8738933 100644
--- a/drivers/pinctrl/pinctrl-exynos.c
+++ b/drivers/pinctrl/pinctrl-exynos.c
@@ -677,3 +677,111 @@ struct samsung_pin_ctrl exynos4x12_pin_ctrl[] = {
.label = "exynos4x12-gpio-ctrl3",
},
};
+
+/* pin banks of exynos5250 pin-controller 0 */
+static struct samsung_pin_bank exynos5250_pin_banks0[] = {
+ EXYNOS_PIN_BANK_EINTG(8, 0x000, "gpa0", 0x00),
+ EXYNOS_PIN_BANK_EINTG(6, 0x020, "gpa1", 0x04),
+ EXYNOS_PIN_BANK_EINTG(8, 0x040, "gpa2", 0x08),
+ EXYNOS_PIN_BANK_EINTG(5, 0x060, "gpb0", 0x0c),
+ EXYNOS_PIN_BANK_EINTG(5, 0x080, "gpb1", 0x10),
+ EXYNOS_PIN_BANK_EINTG(4, 0x0A0, "gpb2", 0x14),
+ EXYNOS_PIN_BANK_EINTG(4, 0x0C0, "gpb3", 0x18),
+ EXYNOS_PIN_BANK_EINTG(7, 0x0E0, "gpc0", 0x1c),
+ EXYNOS_PIN_BANK_EINTG(4, 0x100, "gpc1", 0x20),
+ EXYNOS_PIN_BANK_EINTG(7, 0x120, "gpc2", 0x24),
+ EXYNOS_PIN_BANK_EINTG(7, 0x140, "gpc3", 0x28),
+ EXYNOS_PIN_BANK_EINTG(4, 0x160, "gpd0", 0x2c),
+ EXYNOS_PIN_BANK_EINTG(8, 0x180, "gpd1", 0x30),
+ EXYNOS_PIN_BANK_EINTG(7, 0x2E0, "gpc4", 0x34),
+ EXYNOS_PIN_BANK_EINTN(6, 0x1A0, "gpy0"),
+ EXYNOS_PIN_BANK_EINTN(4, 0x1C0, "gpy1"),
+ EXYNOS_PIN_BANK_EINTN(6, 0x1E0, "gpy2"),
+ EXYNOS_PIN_BANK_EINTN(8, 0x200, "gpy3"),
+ EXYNOS_PIN_BANK_EINTN(8, 0x220, "gpy4"),
+ EXYNOS_PIN_BANK_EINTN(8, 0x240, "gpy5"),
+ EXYNOS_PIN_BANK_EINTN(8, 0x260, "gpy6"),
+ EXYNOS_PIN_BANK_EINTW(8, 0xC00, "gpx0", 0x00),
+ EXYNOS_PIN_BANK_EINTW(8, 0xC20, "gpx1", 0x04),
+ EXYNOS_PIN_BANK_EINTW(8, 0xC40, "gpx2", 0x08),
+ EXYNOS_PIN_BANK_EINTW(8, 0xC60, "gpx3", 0x0c),
+};
+
+/* pin banks of exynos5250 pin-controller 1 */
+static struct samsung_pin_bank exynos5250_pin_banks1[] = {
+ EXYNOS_PIN_BANK_EINTG(8, 0x000, "gpe0", 0x00),
+ EXYNOS_PIN_BANK_EINTG(2, 0x020, "gpe1", 0x04),
+ EXYNOS_PIN_BANK_EINTG(4, 0x040, "gpf0", 0x08),
+ EXYNOS_PIN_BANK_EINTG(4, 0x060, "gpf1", 0x0c),
+ EXYNOS_PIN_BANK_EINTG(8, 0x080, "gpg0", 0x10),
+ EXYNOS_PIN_BANK_EINTG(8, 0x0A0, "gpg1", 0x14),
+ EXYNOS_PIN_BANK_EINTG(2, 0x0C0, "gpg2", 0x18),
+ EXYNOS_PIN_BANK_EINTG(4, 0x0E0, "gph0", 0x1c),
+ EXYNOS_PIN_BANK_EINTG(8, 0x100, "gph1", 0x20),
+};
+
+/* pin banks of exynos5250 pin-controller 2 */
+static struct samsung_pin_bank exynos5250_pin_banks2[] = {
+ EXYNOS_PIN_BANK_EINTG(8, 0x000, "gpv0", 0x00),
+ EXYNOS_PIN_BANK_EINTG(8, 0x020, "gpv1", 0x04),
+ EXYNOS_PIN_BANK_EINTG(8, 0x060, "gpv2", 0x08),
+ EXYNOS_PIN_BANK_EINTG(8, 0x080, "gpv3", 0x0c),
+ EXYNOS_PIN_BANK_EINTG(2, 0x0C0, "gpv4", 0x10),
+};
+
+/* pin banks of exynos5250 pin-controller 3 */
+static struct samsung_pin_bank exynos5250_pin_banks3[] = {
+ EXYNOS_PIN_BANK_EINTG(7, 0x000, "gpz", 0x00),
+};
+
+/*
+ * Samsung pinctrl driver data for Exynos5250 SoC. Exynos5250 SoC includes
+ * four gpio/pin-mux/pinconfig controllers.
+ */
+struct samsung_pin_ctrl exynos5250_pin_ctrl[] = {
+ {
+ /* pin-controller instance 0 data */
+ .pin_banks = exynos5250_pin_banks0,
+ .nr_banks = ARRAY_SIZE(exynos5250_pin_banks0),
+ .geint_con = EXYNOS_GPIO_ECON_OFFSET,
+ .geint_mask = EXYNOS_GPIO_EMASK_OFFSET,
+ .geint_pend = EXYNOS_GPIO_EPEND_OFFSET,
+ .weint_con = EXYNOS_WKUP_ECON_OFFSET,
+ .weint_mask = EXYNOS_WKUP_EMASK_OFFSET,
+ .weint_pend = EXYNOS_WKUP_EPEND_OFFSET,
+ .svc = EXYNOS_SVC_OFFSET,
+ .eint_gpio_init = exynos_eint_gpio_init,
+ .eint_wkup_init = exynos_eint_wkup_init,
+ .label = "exynos5250-gpio-ctrl0",
+ }, {
+ /* pin-controller instance 1 data */
+ .pin_banks = exynos5250_pin_banks1,
+ .nr_banks = ARRAY_SIZE(exynos5250_pin_banks1),
+ .geint_con = EXYNOS_GPIO_ECON_OFFSET,
+ .geint_mask = EXYNOS_GPIO_EMASK_OFFSET,
+ .geint_pend = EXYNOS_GPIO_EPEND_OFFSET,
+ .svc = EXYNOS_SVC_OFFSET,
+ .eint_gpio_init = exynos_eint_gpio_init,
+ .label = "exynos5250-gpio-ctrl1",
+ }, {
+ /* pin-controller instance 2 data */
+ .pin_banks = exynos5250_pin_banks2,
+ .nr_banks = ARRAY_SIZE(exynos5250_pin_banks2),
+ .geint_con = EXYNOS_GPIO_ECON_OFFSET,
+ .geint_mask = EXYNOS_GPIO_EMASK_OFFSET,
+ .geint_pend = EXYNOS_GPIO_EPEND_OFFSET,
+ .svc = EXYNOS_SVC_OFFSET,
+ .eint_gpio_init = exynos_eint_gpio_init,
+ .label = "exynos5250-gpio-ctrl2",
+ }, {
+ /* pin-controller instance 3 data */
+ .pin_banks = exynos5250_pin_banks3,
+ .nr_banks = ARRAY_SIZE(exynos5250_pin_banks3),
+ .geint_con = EXYNOS_GPIO_ECON_OFFSET,
+ .geint_mask = EXYNOS_GPIO_EMASK_OFFSET,
+ .geint_pend = EXYNOS_GPIO_EPEND_OFFSET,
+ .svc = EXYNOS_SVC_OFFSET,
+ .eint_gpio_init = exynos_eint_gpio_init,
+ .label = "exynos5250-gpio-ctrl3",
+ },
+};
diff --git a/drivers/pinctrl/pinctrl-samsung.c b/drivers/pinctrl/pinctrl-samsung.c
index f206df1..3d5cf63 100644
--- a/drivers/pinctrl/pinctrl-samsung.c
+++ b/drivers/pinctrl/pinctrl-samsung.c
@@ -948,6 +948,8 @@ static const struct of_device_id samsung_pinctrl_dt_match[] = {
.data = (void *)exynos4210_pin_ctrl },
{ .compatible = "samsung,exynos4x12-pinctrl",
.data = (void *)exynos4x12_pin_ctrl },
+ { .compatible = "samsung,exynos5250-pinctrl",
+ .data = (void *)exynos5250_pin_ctrl },
{},
};
MODULE_DEVICE_TABLE(of, samsung_pinctrl_dt_match);
diff --git a/drivers/pinctrl/pinctrl-samsung.h b/drivers/pinctrl/pinctrl-samsung.h
index e2d4e67..ee964aa 100644
--- a/drivers/pinctrl/pinctrl-samsung.h
+++ b/drivers/pinctrl/pinctrl-samsung.h
@@ -237,5 +237,6 @@ struct samsung_pmx_func {
/* list of all exported SoC specific data */
extern struct samsung_pin_ctrl exynos4210_pin_ctrl[];
extern struct samsung_pin_ctrl exynos4x12_pin_ctrl[];
+extern struct samsung_pin_ctrl exynos5250_pin_ctrl[];
#endif /* __PINCTRL_SAMSUNG_H */
--
1.6.6.rc2
next prev parent reply other threads:[~2013-03-06 10:57 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-03-06 11:18 [PATCH v2 0/3] pinctrl: exynos: add support for Samsung's Exynos5250 Thomas Abraham
2013-03-06 11:18 ` Thomas Abraham [this message]
2013-03-07 8:08 ` [PATCH v2 1/3] pinctrl: exynos: add exynos5250 SoC specific data Linus Walleij
2013-03-07 11:09 ` Kukjin Kim
2013-03-08 7:09 ` Linus Walleij
2013-03-06 11:18 ` [PATCH v2 2/3] gpio: samsung: skip gpiolib registration if pinctrl support is enabled for exynos5250 Thomas Abraham
2013-03-06 11:18 ` [PATCH v2 3/3] arm: exynos: skip wakeup interrupt registration for exynos5250 if pinctrl is enabled Thomas Abraham
2013-03-07 0:11 ` [PATCH v2 0/3] pinctrl: exynos: add support for Samsung's Exynos5250 Kukjin Kim
2013-03-07 3:22 ` Thomas Abraham
2013-03-07 3:26 ` Kukjin Kim
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1362568712-13586-2-git-send-email-thomas.abraham@linaro.org \
--to=thomas.abraham@linaro.org \
--cc=kgene.kim@samsung.com \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=patches@linaro.org \
--cc=t.figa@samsung.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®