From: Jiri Slaby <jslaby@suse.cz>
To: gregkh@linuxfoundation.org
Cc: peter@hurleysoftware.com, jirislaby@gmail.com,
linux-kernel@vger.kernel.org
Subject: [PATCH 10/16] TTY: cleanup tty->hw_stopped uses
Date: Thu, 7 Mar 2013 13:12:34 +0100 [thread overview]
Message-ID: <1362658360-26629-10-git-send-email-jslaby@suse.cz> (raw)
In-Reply-To: <1362658360-26629-1-git-send-email-jslaby@suse.cz>
tty->hw_stopped is set only by drivers to remember HW state. If it is
never set to 1 in a particular driver, there is no need to check it in
the driver at all. Remove such checks.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
arch/ia64/hp/sim/simserial.c | 16 +++-------------
drivers/isdn/i4l/isdn_tty.c | 3 ---
drivers/net/caif/caif_serial.c | 1 -
drivers/tty/rocket.c | 19 ++++++++-----------
drivers/tty/serial/68328serial.c | 9 +++------
drivers/tty/serial/arc_uart.c | 2 +-
drivers/tty/serial/crisv10.c | 12 ++----------
7 files changed, 17 insertions(+), 45 deletions(-)
diff --git a/arch/ia64/hp/sim/simserial.c b/arch/ia64/hp/sim/simserial.c
index da2f319..e70cade 100644
--- a/arch/ia64/hp/sim/simserial.c
+++ b/arch/ia64/hp/sim/simserial.c
@@ -142,8 +142,7 @@ static void transmit_chars(struct tty_struct *tty, struct serial_state *info,
goto out;
}
- if (info->xmit.head == info->xmit.tail || tty->stopped ||
- tty->hw_stopped) {
+ if (info->xmit.head == info->xmit.tail || tty->stopped) {
#ifdef SIMSERIAL_DEBUG
printk("transmit_chars: head=%d, tail=%d, stopped=%d\n",
info->xmit.head, info->xmit.tail, tty->stopped);
@@ -181,7 +180,7 @@ static void rs_flush_chars(struct tty_struct *tty)
struct serial_state *info = tty->driver_data;
if (info->xmit.head == info->xmit.tail || tty->stopped ||
- tty->hw_stopped || !info->xmit.buf)
+ !info->xmit.buf)
return;
transmit_chars(tty, info, NULL);
@@ -217,7 +216,7 @@ static int rs_write(struct tty_struct * tty,
* Hey, we transmit directly from here in our case
*/
if (CIRC_CNT(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE) &&
- !tty->stopped && !tty->hw_stopped)
+ !tty->stopped)
transmit_chars(tty, info, NULL);
return ret;
@@ -325,14 +324,6 @@ static int rs_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg)
#define RELEVANT_IFLAG(iflag) (iflag & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK))
-static void rs_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
-{
- /* Handle turning off CRTSCTS */
- if ((old_termios->c_cflag & CRTSCTS) &&
- !(tty->termios.c_cflag & CRTSCTS)) {
- tty->hw_stopped = 0;
- }
-}
/*
* This routine will shutdown a serial port; interrupts are disabled, and
* DTR is dropped if the hangup on close termio flag is on.
@@ -481,7 +472,6 @@ static const struct tty_operations hp_ops = {
.throttle = rs_throttle,
.unthrottle = rs_unthrottle,
.send_xchar = rs_send_xchar,
- .set_termios = rs_set_termios,
.hangup = rs_hangup,
.proc_fops = &rs_proc_fops,
};
diff --git a/drivers/isdn/i4l/isdn_tty.c b/drivers/isdn/i4l/isdn_tty.c
index d8a7d83..2210766 100644
--- a/drivers/isdn/i4l/isdn_tty.c
+++ b/drivers/isdn/i4l/isdn_tty.c
@@ -1470,9 +1470,6 @@ isdn_tty_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
tty->termios.c_ospeed == old_termios->c_ospeed)
return;
isdn_tty_change_speed(info);
- if ((old_termios->c_cflag & CRTSCTS) &&
- !(tty->termios.c_cflag & CRTSCTS))
- tty->hw_stopped = 0;
}
}
diff --git a/drivers/net/caif/caif_serial.c b/drivers/net/caif/caif_serial.c
index 666891a..d1bf0ff 100644
--- a/drivers/net/caif/caif_serial.c
+++ b/drivers/net/caif/caif_serial.c
@@ -88,7 +88,6 @@ static inline void update_tty_status(struct ser_device *ser)
{
ser->tty_status =
ser->tty->stopped << 5 |
- ser->tty->hw_stopped << 4 |
ser->tty->flow_stopped << 3 |
ser->tty->packet << 2 |
ser->tty->port->low_latency << 1 |
diff --git a/drivers/tty/rocket.c b/drivers/tty/rocket.c
index bbffd7a..f5abc28 100644
--- a/drivers/tty/rocket.c
+++ b/drivers/tty/rocket.c
@@ -449,7 +449,7 @@ static void rp_do_transmit(struct r_port *info)
/* Loop sending data to FIFO until done or FIFO full */
while (1) {
- if (tty->stopped || tty->hw_stopped)
+ if (tty->stopped)
break;
c = min(info->xmit_fifo_room, info->xmit_cnt);
c = min(c, XMIT_BUF_SIZE - info->xmit_tail);
@@ -1106,15 +1106,12 @@ static void rp_set_termios(struct tty_struct *tty,
/* Handle transition away from B0 status */
if (!(old_termios->c_cflag & CBAUD) && (tty->termios.c_cflag & CBAUD)) {
- if (!tty->hw_stopped || !(tty->termios.c_cflag & CRTSCTS))
- sSetRTS(cp);
+ sSetRTS(cp);
sSetDTR(cp);
}
- if ((old_termios->c_cflag & CRTSCTS) && !(tty->termios.c_cflag & CRTSCTS)) {
- tty->hw_stopped = 0;
+ if ((old_termios->c_cflag & CRTSCTS) && !(tty->termios.c_cflag & CRTSCTS))
rp_start(tty);
- }
}
static int rp_break(struct tty_struct *tty, int break_state)
@@ -1570,10 +1567,10 @@ static int rp_put_char(struct tty_struct *tty, unsigned char ch)
spin_lock_irqsave(&info->slock, flags);
cp = &info->channel;
- if (!tty->stopped && !tty->hw_stopped && info->xmit_fifo_room == 0)
+ if (!tty->stopped && info->xmit_fifo_room == 0)
info->xmit_fifo_room = TXFIFO_SIZE - sGetTxCnt(cp);
- if (tty->stopped || tty->hw_stopped || info->xmit_fifo_room == 0 || info->xmit_cnt != 0) {
+ if (tty->stopped || info->xmit_fifo_room == 0 || info->xmit_cnt != 0) {
info->xmit_buf[info->xmit_head++] = ch;
info->xmit_head &= XMIT_BUF_SIZE - 1;
info->xmit_cnt++;
@@ -1614,14 +1611,14 @@ static int rp_write(struct tty_struct *tty,
#endif
cp = &info->channel;
- if (!tty->stopped && !tty->hw_stopped && info->xmit_fifo_room < count)
+ if (!tty->stopped && info->xmit_fifo_room < count)
info->xmit_fifo_room = TXFIFO_SIZE - sGetTxCnt(cp);
/*
* If the write queue for the port is empty, and there is FIFO space, stuff bytes
* into FIFO. Use the write queue for temp storage.
*/
- if (!tty->stopped && !tty->hw_stopped && info->xmit_cnt == 0 && info->xmit_fifo_room > 0) {
+ if (!tty->stopped && info->xmit_cnt == 0 && info->xmit_fifo_room > 0) {
c = min(count, info->xmit_fifo_room);
b = buf;
@@ -1669,7 +1666,7 @@ static int rp_write(struct tty_struct *tty,
retval += c;
}
- if ((retval > 0) && !tty->stopped && !tty->hw_stopped)
+ if ((retval > 0) && !tty->stopped)
set_bit((info->aiop * 8) + info->chan, (void *) &xmit_flags[info->board]);
end:
diff --git a/drivers/tty/serial/68328serial.c b/drivers/tty/serial/68328serial.c
index 4939947..ef2e08e 100644
--- a/drivers/tty/serial/68328serial.c
+++ b/drivers/tty/serial/68328serial.c
@@ -630,8 +630,7 @@ static void rs_flush_chars(struct tty_struct *tty)
/* Enable transmitter */
local_irq_save(flags);
- if (info->xmit_cnt <= 0 || tty->stopped || tty->hw_stopped ||
- !info->xmit_buf) {
+ if (info->xmit_cnt <= 0 || tty->stopped || !info->xmit_buf) {
local_irq_restore(flags);
return;
}
@@ -697,7 +696,7 @@ static int rs_write(struct tty_struct * tty,
total += c;
}
- if (info->xmit_cnt && !tty->stopped && !tty->hw_stopped) {
+ if (info->xmit_cnt && !tty->stopped) {
/* Enable transmitter */
local_irq_disable();
#ifndef USE_INTS
@@ -978,10 +977,8 @@ static void rs_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
change_speed(info, tty);
if ((old_termios->c_cflag & CRTSCTS) &&
- !(tty->termios.c_cflag & CRTSCTS)) {
- tty->hw_stopped = 0;
+ !(tty->termios.c_cflag & CRTSCTS))
rs_start(tty);
- }
}
diff --git a/drivers/tty/serial/arc_uart.c b/drivers/tty/serial/arc_uart.c
index d97e194..cbf1d15 100644
--- a/drivers/tty/serial/arc_uart.c
+++ b/drivers/tty/serial/arc_uart.c
@@ -162,7 +162,7 @@ static unsigned int arc_serial_tx_empty(struct uart_port *port)
/*
* Driver internal routine, used by both tty(serial core) as well as tx-isr
* -Called under spinlock in either cases
- * -also tty->stopped / tty->hw_stopped has already been checked
+ * -also tty->stopped has already been checked
* = by uart_start( ) before calling us
* = tx_ist checks that too before calling
*/
diff --git a/drivers/tty/serial/crisv10.c b/drivers/tty/serial/crisv10.c
index 5f37c31..50f56f3 100644
--- a/drivers/tty/serial/crisv10.c
+++ b/drivers/tty/serial/crisv10.c
@@ -2534,8 +2534,7 @@ static void handle_ser_tx_interrupt(struct e100_serial *info)
}
/* Normal char-by-char interrupt */
if (info->xmit.head == info->xmit.tail
- || info->port.tty->stopped
- || info->port.tty->hw_stopped) {
+ || info->port.tty->stopped) {
DFLOW(DEBUG_LOG(info->line, "tx_int: stopped %i\n",
info->port.tty->stopped));
e100_disable_serial_tx_ready_irq(info);
@@ -3098,7 +3097,6 @@ rs_flush_chars(struct tty_struct *tty)
if (info->tr_running ||
info->xmit.head == info->xmit.tail ||
tty->stopped ||
- tty->hw_stopped ||
!info->xmit.buf)
return;
@@ -3176,7 +3174,6 @@ static int rs_raw_write(struct tty_struct *tty,
if (info->xmit.head != info->xmit.tail &&
!tty->stopped &&
- !tty->hw_stopped &&
!info->tr_running) {
start_transmit(info);
}
@@ -3733,10 +3730,8 @@ rs_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
/* Handle turning off CRTSCTS */
if ((old_termios->c_cflag & CRTSCTS) &&
- !(tty->termios.c_cflag & CRTSCTS)) {
- tty->hw_stopped = 0;
+ !(tty->termios.c_cflag & CRTSCTS))
rs_start(tty);
- }
}
@@ -4256,9 +4251,6 @@ static void seq_line_info(struct seq_file *m, struct e100_serial *info)
if (info->port.tty->stopped)
seq_printf(m, " stopped:%i",
(int)info->port.tty->stopped);
- if (info->port.tty->hw_stopped)
- seq_printf(m, " hw_stopped:%i",
- (int)info->port.tty->hw_stopped);
}
{
--
1.8.1.4
next prev parent reply other threads:[~2013-03-07 12:14 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-03-07 12:12 [PATCH 01/16] TTY: jsm, remove superfluous check Jiri Slaby
2013-03-07 12:12 ` [PATCH 02/16] TTY: synclink, " Jiri Slaby
2013-03-07 12:12 ` [PATCH 03/16] TTY: do not warn about setting speed via SPD_* Jiri Slaby
2013-03-07 12:12 ` [PATCH 04/16] TTY: msm_smd_tty, clean up activate/shutdown Jiri Slaby
2013-03-07 12:12 ` [PATCH 05/16] TTY: add tty_port_tty_wakeup helper Jiri Slaby
2013-03-08 15:02 ` Peter Hurley
2013-03-08 19:02 ` Jiri Slaby
2013-03-18 23:16 ` Greg KH
2013-03-07 12:12 ` [PATCH 06/16] TTY: add tty_port_tty_hangup helper Jiri Slaby
2013-03-07 12:12 ` [PATCH 07/16] TTY: quatech2, remove unneeded is_open Jiri Slaby
2013-03-13 13:46 ` Bill Pemberton
2013-03-13 14:17 ` Jiri Slaby
2013-03-13 14:27 ` Bill Pemberton
2013-03-07 12:12 ` [PATCH 08/16] TTY: serial/bfin_uart, unbreak build with KGDB enabled Jiri Slaby
2013-03-08 7:59 ` Sonic Zhang
2013-03-07 12:12 ` [PATCH 09/16] TTY: serial/msm_serial_hs, remove unused tty Jiri Slaby
2013-03-07 12:12 ` Jiri Slaby [this message]
2013-03-08 14:39 ` [PATCH 10/16] TTY: cleanup tty->hw_stopped uses Peter Hurley
2013-03-08 14:46 ` Jiri Slaby
2013-03-08 14:55 ` Peter Hurley
2013-03-07 12:12 ` [PATCH 11/16] crisv10: stop returning info from handle_ser_rx_interrupt Jiri Slaby
2013-03-08 15:06 ` Peter Hurley
2013-03-07 12:12 ` [PATCH 12/16] crisv10: use flags from tty_port Jiri Slaby
2013-03-07 12:12 ` [PATCH 13/16] crisv10: remove unused members Jiri Slaby
2013-03-07 12:12 ` [PATCH 14/16] crisv10: use close delays from tty_port Jiri Slaby
2013-03-07 12:12 ` [PATCH 15/16] crisv10: use *_wait " Jiri Slaby
2013-03-07 12:12 ` [PATCH 16/16] crisv10: use counts " Jiri Slaby
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1362658360-26629-10-git-send-email-jslaby@suse.cz \
--to=jslaby@suse.cz \
--cc=gregkh@linuxfoundation.org \
--cc=jirislaby@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=peter@hurleysoftware.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®