From: Laxman Dewangan <ldewangan@nvidia.com>
To: <swarren@wwwdotorg.org>
Cc: <linux-arm-kernel@lists.infradead.org>,
<linux-tegra@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
Laxman Dewangan <ldewangan@nvidia.com>
Subject: [PATCH V3 5/5] ARM: tegra: add spi nodes to Tegra114 DT
Date: Thu, 14 Mar 2013 01:19:54 +0530 [thread overview]
Message-ID: <1363204194-19487-6-git-send-email-ldewangan@nvidia.com> (raw)
In-Reply-To: <1363204194-19487-1-git-send-email-ldewangan@nvidia.com>
NVIDIA's Tegra114 has 6 spi controllers. These controllers are
redesign on T114 with different register interface.
Add DT entry for spi controllers and make it compatible with
"nvidia,tegra114-spi".
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
---
Changes from V1:
- None
Changes fro V2:
- Rebase to for-3.10/dt of Stephen's Tegra tree.
arch/arm/boot/dts/tegra114.dtsi | 72 +++++++++++++++++++++++++++++++++++++++
1 files changed, 72 insertions(+), 0 deletions(-)
diff --git a/arch/arm/boot/dts/tegra114.dtsi b/arch/arm/boot/dts/tegra114.dtsi
index d2bbfaf..95c4369 100644
--- a/arch/arm/boot/dts/tegra114.dtsi
+++ b/arch/arm/boot/dts/tegra114.dtsi
@@ -212,6 +212,78 @@
clock-names = "div-clk";
};
+ spi@7000d400 {
+ compatible = "nvidia,tegra114-spi";
+ reg = <0x7000d400 0x200>;
+ interrupts = <0 59 0x04>;
+ nvidia,dma-request-selector = <&apbdma 15>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&tegra_car 41>;
+ clock-names = "spi";
+ status = "disabled";
+ };
+
+ spi@7000d600 {
+ compatible = "nvidia,tegra114-spi";
+ reg = <0x7000d600 0x200>;
+ interrupts = <0 82 0x04>;
+ nvidia,dma-request-selector = <&apbdma 16>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&tegra_car 44>;
+ clock-names = "spi";
+ status = "disabled";
+ };
+
+ spi@7000d800 {
+ compatible = "nvidia,tegra114-spi";
+ reg = <0x7000d480 0x200>;
+ interrupts = <0 83 0x04>;
+ nvidia,dma-request-selector = <&apbdma 17>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&tegra_car 46>;
+ clock-names = "spi";
+ status = "disabled";
+ };
+
+ spi@7000da00 {
+ compatible = "nvidia,tegra114-spi";
+ reg = <0x7000da00 0x200>;
+ interrupts = <0 93 0x04>;
+ nvidia,dma-request-selector = <&apbdma 18>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&tegra_car 68>;
+ clock-names = "spi";
+ status = "disabled";
+ };
+
+ spi@7000dc00 {
+ compatible = "nvidia,tegra114-spi";
+ reg = <0x7000dc00 0x200>;
+ interrupts = <0 94 0x04>;
+ nvidia,dma-request-selector = <&apbdma 27>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&tegra_car 104>;
+ clock-names = "spi";
+ status = "disabled";
+ };
+
+ spi@7000de00 {
+ compatible = "nvidia,tegra114-spi";
+ reg = <0x7000de00 0x200>;
+ interrupts = <0 79 0x04>;
+ nvidia,dma-request-selector = <&apbdma 28>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&tegra_car 105>;
+ clock-names = "spi";
+ status = "disabled";
+ };
+
rtc {
compatible = "nvidia,tegra114-rtc", "nvidia,tegra20-rtc";
reg = <0x7000e000 0x100>;
--
1.7.1.1
next prev parent reply other threads:[~2013-03-13 19:52 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-03-13 19:49 [PATCH V3 0/5] ARM: DT: tegra114: Add DT entry for different controller Laxman Dewangan
2013-03-13 19:49 ` [PATCH V3 1/5] ARM: tegra: add APB DMA nodes to Tegra114 DT Laxman Dewangan
2013-03-13 19:49 ` [PATCH V3 2/5] ARM: tegra: add i2c " Laxman Dewangan
2013-03-13 19:49 ` [PATCH V3 3/5] ARM: tegra:add aliases and DMA requestor for serial nodes of Tegra114 Laxman Dewangan
2013-03-13 20:02 ` Stephen Warren
2013-03-15 18:26 ` Stephen Warren
2013-03-15 18:42 ` Laxman Dewangan
2013-03-15 18:58 ` Stephen Warren
2013-03-15 19:03 ` Laxman Dewangan
2013-03-15 18:43 ` Laxman Dewangan
2013-03-13 19:49 ` [PATCH V3 4/5] ARM: tegra: add KBC nodes to Tegra114 DT Laxman Dewangan
2013-03-13 19:49 ` Laxman Dewangan [this message]
2013-03-15 18:42 ` [PATCH V3 5/5] ARM: tegra: add spi " Stephen Warren
2013-03-15 18:47 ` Laxman Dewangan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1363204194-19487-6-git-send-email-ldewangan@nvidia.com \
--to=ldewangan@nvidia.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-tegra@vger.kernel.org \
--cc=swarren@wwwdotorg.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®