From: James Hogan <james.hogan@imgtec.com>
To: <linux-kernel@vger.kernel.org>
Cc: James Hogan <james.hogan@imgtec.com>
Subject: [PATCH 1/3] metag: smp: copy cache partition and enable GCOn
Date: Fri, 15 Mar 2013 13:55:01 +0000 [thread overview]
Message-ID: <1363355703-23654-2-git-send-email-james.hogan@imgtec.com> (raw)
In-Reply-To: <1363355703-23654-1-git-send-email-james.hogan@imgtec.com>
When starting an SMP hardware thread, copy the cache partition
configuration so that the threads share the same cache partitions. Also
enable the GCOn bit if running in the local half of the virtual address
space to enable coherency of shared local cache partitions. An atomic
unlock system event is executed by the new cpu before any memory is read
to ensure that any writes made by the boot cpu prior to full coherency
taking effect are visible to the new cpu.
This is to allow SMP to work even when the bootloader hasn't configured
the caches for coherency. A log message is printed to describe the cache
partition changes so that the user is aware of potential unintentional
cache wastage if they've configured the cache partitions in the wrong
way.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
---
arch/metag/include/asm/metag_mem.h | 3 +
arch/metag/kernel/head.S | 8 +++
arch/metag/kernel/smp.c | 115 +++++++++++++++++++++++++++++++++++++
3 files changed, 126 insertions(+)
diff --git a/arch/metag/include/asm/metag_mem.h b/arch/metag/include/asm/metag_mem.h
index 3f7b54d..aa5a076 100644
--- a/arch/metag/include/asm/metag_mem.h
+++ b/arch/metag/include/asm/metag_mem.h
@@ -700,6 +700,9 @@
#define SYSC_xCPARTG_AND_S 8
#define SYSC_xCPARTL_OR_BITS 0x000F0000 /* Ors into top 4 bits */
#define SYSC_xCPARTL_OR_S 16
+#ifdef METAC_2_1
+#define SYSC_DCPART_GCON_BIT 0x00100000 /* Coherent shared local */
+#endif /* METAC_2_1 */
#define SYSC_xCPARTG_OR_BITS 0x0F000000 /* Ors into top 4 bits */
#define SYSC_xCPARTG_OR_S 24
#define SYSC_CWRMODE_BIT 0x80000000 /* Write cache mode bit */
diff --git a/arch/metag/kernel/head.S b/arch/metag/kernel/head.S
index 969dffa..713f71d 100644
--- a/arch/metag/kernel/head.S
+++ b/arch/metag/kernel/head.S
@@ -1,6 +1,7 @@
! Copyright 2005,2006,2007,2009 Imagination Technologies
#include <linux/init.h>
+#include <asm/metag_mem.h>
#include <generated/asm-offsets.h>
#undef __exit
@@ -48,6 +49,13 @@ __exit:
.global _secondary_startup
.type _secondary_startup,function
_secondary_startup:
+#if CONFIG_PAGE_OFFSET < LINGLOBAL_BASE
+ ! In case GCOn has just been turned on we need to fence any writes that
+ ! the boot thread might have performed prior to coherency taking effect.
+ MOVT D0Re0,#HI(LINSYSEVENT_WR_ATOMIC_UNLOCK)
+ MOV D1Re0,#0
+ SETD [D0Re0], D1Re0
+#endif
MOVT A0StP,#HI(_secondary_data_stack)
ADD A0StP,A0StP,#LO(_secondary_data_stack)
GETD A0StP,[A0StP]
diff --git a/arch/metag/kernel/smp.c b/arch/metag/kernel/smp.c
index 4b6d1f14..4e7751a 100644
--- a/arch/metag/kernel/smp.c
+++ b/arch/metag/kernel/smp.c
@@ -28,6 +28,8 @@
#include <asm/cachepart.h>
#include <asm/core_reg.h>
#include <asm/cpu.h>
+#include <asm/global_lock.h>
+#include <asm/metag_mem.h>
#include <asm/mmu_context.h>
#include <asm/pgtable.h>
#include <asm/pgalloc.h>
@@ -37,6 +39,9 @@
#include <asm/hwthread.h>
#include <asm/traps.h>
+#define SYSC_DCPART(n) (SYSC_DCPART0 + SYSC_xCPARTn_STRIDE * (n))
+#define SYSC_ICPART(n) (SYSC_ICPART0 + SYSC_xCPARTn_STRIDE * (n))
+
DECLARE_PER_CPU(PTBI, pTBI);
void *secondary_data_stack;
@@ -99,6 +104,114 @@ int __cpuinit boot_secondary(unsigned int thread, struct task_struct *idle)
return 0;
}
+/**
+ * describe_cachepart_change: describe a change to cache partitions.
+ * @thread: Hardware thread number.
+ * @label: Label of cache type, e.g. "dcache" or "icache".
+ * @sz: Total size of the cache.
+ * @old: Old cache partition configuration (*CPART* register).
+ * @new: New cache partition configuration (*CPART* register).
+ *
+ * If the cache partition has changed, prints a message to the log describing
+ * those changes.
+ */
+static __cpuinit void describe_cachepart_change(unsigned int thread,
+ const char *label,
+ unsigned int sz,
+ unsigned int old,
+ unsigned int new)
+{
+ unsigned int lor1, land1, gor1, gand1;
+ unsigned int lor2, land2, gor2, gand2;
+ unsigned int diff = old ^ new;
+
+ if (!diff)
+ return;
+
+ pr_info("Thread %d: %s partition changed:", thread, label);
+ if (diff & (SYSC_xCPARTL_OR_BITS | SYSC_xCPARTL_AND_BITS)) {
+ lor1 = (old & SYSC_xCPARTL_OR_BITS) >> SYSC_xCPARTL_OR_S;
+ lor2 = (new & SYSC_xCPARTL_OR_BITS) >> SYSC_xCPARTL_OR_S;
+ land1 = (old & SYSC_xCPARTL_AND_BITS) >> SYSC_xCPARTL_AND_S;
+ land2 = (new & SYSC_xCPARTL_AND_BITS) >> SYSC_xCPARTL_AND_S;
+ pr_cont(" L:%#x+%#x->%#x+%#x",
+ (lor1 * sz) >> 4,
+ ((land1 + 1) * sz) >> 4,
+ (lor2 * sz) >> 4,
+ ((land2 + 1) * sz) >> 4);
+ }
+ if (diff & (SYSC_xCPARTG_OR_BITS | SYSC_xCPARTG_AND_BITS)) {
+ gor1 = (old & SYSC_xCPARTG_OR_BITS) >> SYSC_xCPARTG_OR_S;
+ gor2 = (new & SYSC_xCPARTG_OR_BITS) >> SYSC_xCPARTG_OR_S;
+ gand1 = (old & SYSC_xCPARTG_AND_BITS) >> SYSC_xCPARTG_AND_S;
+ gand2 = (new & SYSC_xCPARTG_AND_BITS) >> SYSC_xCPARTG_AND_S;
+ pr_cont(" G:%#x+%#x->%#x+%#x",
+ (gor1 * sz) >> 4,
+ ((gand1 + 1) * sz) >> 4,
+ (gor2 * sz) >> 4,
+ ((gand2 + 1) * sz) >> 4);
+ }
+ if (diff & SYSC_CWRMODE_BIT)
+ pr_cont(" %sWR",
+ (new & SYSC_CWRMODE_BIT) ? "+" : "-");
+ if (diff & SYSC_DCPART_GCON_BIT)
+ pr_cont(" %sGCOn",
+ (new & SYSC_DCPART_GCON_BIT) ? "+" : "-");
+ pr_cont("\n");
+}
+
+/**
+ * setup_smp_cache: ensure cache coherency for new SMP thread.
+ * @thread: New hardware thread number.
+ *
+ * Ensures that coherency is enabled and that the threads share the same cache
+ * partitions.
+ */
+static __cpuinit void setup_smp_cache(unsigned int thread)
+{
+ unsigned int this_thread, lflags;
+ unsigned int dcsz, dcpart_this, dcpart_old, dcpart_new;
+ unsigned int icsz, icpart_old, icpart_new;
+
+ /*
+ * Copy over the current thread's cache partition configuration to the
+ * new thread so that they share cache partitions.
+ */
+ __global_lock2(lflags);
+ this_thread = hard_processor_id();
+ /* Share dcache partition */
+ dcpart_this = metag_in32(SYSC_DCPART(this_thread));
+ dcpart_old = metag_in32(SYSC_DCPART(thread));
+ dcpart_new = dcpart_this;
+#if PAGE_OFFSET < LINGLOBAL_BASE
+ /*
+ * For the local data cache to be coherent the threads must also have
+ * GCOn enabled.
+ */
+ dcpart_new |= SYSC_DCPART_GCON_BIT;
+ metag_out32(dcpart_new, SYSC_DCPART(this_thread));
+#endif
+ metag_out32(dcpart_new, SYSC_DCPART(thread));
+ /* Share icache partition too */
+ icpart_new = metag_in32(SYSC_ICPART(this_thread));
+ icpart_old = metag_in32(SYSC_ICPART(thread));
+ metag_out32(icpart_new, SYSC_ICPART(thread));
+ __global_unlock2(lflags);
+
+ /*
+ * Log if the cache partitions were altered so the user is aware of any
+ * potential unintentional cache wastage.
+ */
+ dcsz = get_dcache_size();
+ icsz = get_dcache_size();
+ describe_cachepart_change(this_thread, "dcache", dcsz,
+ dcpart_this, dcpart_new);
+ describe_cachepart_change(thread, "dcache", dcsz,
+ dcpart_old, dcpart_new);
+ describe_cachepart_change(thread, "icache", icsz,
+ icpart_old, icpart_new);
+}
+
int __cpuinit __cpu_up(unsigned int cpu, struct task_struct *idle)
{
unsigned int thread = cpu_2_hwthread_id[cpu];
@@ -108,6 +221,8 @@ int __cpuinit __cpu_up(unsigned int cpu, struct task_struct *idle)
flush_tlb_all();
+ setup_smp_cache(thread);
+
/*
* Tell the secondary CPU where to find its idle thread's stack.
*/
--
1.8.1.2
next prev parent reply other threads:[~2013-03-15 13:55 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-03-15 13:55 [PATCH 0/3] metag: smp / cache changes James Hogan
2013-03-15 13:55 ` James Hogan [this message]
2013-03-15 13:55 ` [PATCH 2/3] metag: cachepart: take into account small cache bits James Hogan
2013-03-15 13:55 ` [PATCH 3/3] metag: cachepart: fix get_global_dcache_size() typo James Hogan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1363355703-23654-2-git-send-email-james.hogan@imgtec.com \
--to=james.hogan@imgtec.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®