From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S932279Ab3COPYy (ORCPT ); Fri, 15 Mar 2013 11:24:54 -0400 Received: from devils.ext.ti.com ([198.47.26.153]:40398 "EHLO devils.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1755395Ab3COPQx (ORCPT ); Fri, 15 Mar 2013 11:16:53 -0400 From: Roger Quadros To: CC: , , , , , Subject: [PATCH v2 01/23] usb: phy: nop: Add some parameters to platform data Date: Fri, 15 Mar 2013 17:16:22 +0200 Message-ID: <1363360604-21368-2-git-send-email-rogerq@ti.com> X-Mailer: git-send-email 1.7.4.1 In-Reply-To: <1363360604-21368-1-git-send-email-rogerq@ti.com> References: <1363360604-21368-1-git-send-email-rogerq@ti.com> MIME-Version: 1.0 Content-Type: text/plain Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Add clk_rate parameter to platform data. If supplied, the NOP phy driver will program the clock to that rate during probe. Also add 2 flags, needs_vcc and needs_reset. If the flag is set and the regulator couldn't be found then the driver will bail out with -EPROBE_DEFER. Signed-off-by: Roger Quadros Acked-by: Felipe Balbi --- include/linux/usb/nop-usb-xceiv.h | 5 +++++ 1 files changed, 5 insertions(+), 0 deletions(-) diff --git a/include/linux/usb/nop-usb-xceiv.h b/include/linux/usb/nop-usb-xceiv.h index 28884c7..148d351 100644 --- a/include/linux/usb/nop-usb-xceiv.h +++ b/include/linux/usb/nop-usb-xceiv.h @@ -5,6 +5,11 @@ struct nop_usb_xceiv_platform_data { enum usb_phy_type type; + unsigned long clk_rate; + + /* if set fails with -EPROBE_DEFER if can't get regulator */ + unsigned int needs_vcc:1; + unsigned int needs_reset:1; }; #if defined(CONFIG_NOP_USB_XCEIV) || (defined(CONFIG_NOP_USB_XCEIV_MODULE) && defined(MODULE)) -- 1.7.4.1