From: Wenyou Yang <wenyou.yang@atmel.com>
To: <linux-arm-kernel@lists.infradead.org>
Cc: <grant.likely@secretlab.ca>,
<broonie@opensource.wolfsonmicro.com>, <richard.genoud@gmail.com>,
<plagnioj@jcrosoft.com>, <nicolas.ferre@atmel.com>,
<JM.Lin@atmel.com>, <wenyou.yang@atmel.com>,
<spi-devel-general@lists.sourceforge.net>,
<linux@arm.linux.org.uk>, <linux-kernel@vger.kernel.org>
Subject: [PATCH v7 14/14] ARM: dts: add pinctrl property for spi node for atmel SoC
Date: Tue, 19 Mar 2013 15:52:15 +0800 [thread overview]
Message-ID: <1363679535-4280-1-git-send-email-wenyou.yang@atmel.com> (raw)
In-Reply-To: <1363678866-3567-1-git-send-email-wenyou.yang@atmel.com>
Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
Cc: linux@arm.linux.org.uk
Cc: linux-kernel@vger.kernel.org
---
arch/arm/boot/dts/at91sam9260.dtsi | 22 ++++++++++++++++++++++
arch/arm/boot/dts/at91sam9263.dtsi | 22 ++++++++++++++++++++++
arch/arm/boot/dts/at91sam9g45.dtsi | 22 ++++++++++++++++++++++
arch/arm/boot/dts/at91sam9n12.dtsi | 22 ++++++++++++++++++++++
arch/arm/boot/dts/at91sam9x5.dtsi | 22 ++++++++++++++++++++++
5 files changed, 110 insertions(+)
diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi
index 6e31dc8..39253b9 100644
--- a/arch/arm/boot/dts/at91sam9260.dtsi
+++ b/arch/arm/boot/dts/at91sam9260.dtsi
@@ -322,6 +322,24 @@
};
};
+ spi0 {
+ pinctrl_spi0: spi0-0 {
+ atmel,pins =
+ <0 0 0x1 0x0 /* PA0 periph A SPI0_MISO pin */
+ 0 1 0x1 0x0 /* PA1 periph A SPI0_MOSI pin */
+ 0 2 0x1 0x0>; /* PA2 periph A SPI0_SPCK pin */
+ };
+ };
+
+ spi1 {
+ pinctrl_spi1: spi1-0 {
+ atmel,pins =
+ <1 0 0x1 0x0 /* PB0 periph A SPI1_MISO pin */
+ 1 1 0x1 0x0 /* PB1 periph A SPI1_MOSI pin */
+ 1 2 0x1 0x0>; /* PB2 periph A SPI1_SPCK pin */
+ };
+ };
+
pioA: gpio@fffff400 {
compatible = "atmel,at91rm9200-gpio";
reg = <0xfffff400 0x200>;
@@ -477,6 +495,8 @@
compatible = "atmel,at91rm9200-spi";
reg = <0xfffc8000 0x200>;
interrupts = <12 4 3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi0>;
status = "disabled";
};
@@ -486,6 +506,8 @@
compatible = "atmel,at91rm9200-spi";
reg = <0xfffcc000 0x200>;
interrupts = <13 4 3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi1>;
status = "disabled";
};
diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi
index 6c6d9ae..94b58ab 100644
--- a/arch/arm/boot/dts/at91sam9263.dtsi
+++ b/arch/arm/boot/dts/at91sam9263.dtsi
@@ -303,6 +303,24 @@
};
};
+ spi0 {
+ pinctrl_spi0: spi0-0 {
+ atmel,pins =
+ <0 0 0x2 0x0 /* PA0 periph B SPI0_MISO pin */
+ 0 1 0x2 0x0 /* PA1 periph B SPI0_MOSI pin */
+ 0 2 0x2 0x0>; /* PA2 periph B SPI0_SPCK pin */
+ };
+ };
+
+ spi1 {
+ pinctrl_spi1: spi1-0 {
+ atmel,pins =
+ <1 12 0x1 0x0 /* PB12 periph A SPI1_MISO pin */
+ 1 13 0x1 0x0 /* PB13 periph A SPI1_MOSI pin */
+ 1 14 0x1 0x0>; /* PB14 periph A SPI1_SPCK pin */
+ };
+ };
+
pioA: gpio@fffff200 {
compatible = "atmel,at91rm9200-gpio";
reg = <0xfffff200 0x200>;
@@ -469,6 +487,8 @@
compatible = "atmel,at91rm9200-spi";
reg = <0xfffa4000 0x200>;
interrupts = <14 4 3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi0>;
status = "disabled";
};
@@ -478,6 +498,8 @@
compatible = "atmel,at91rm9200-spi";
reg = <0xfffa8000 0x200>;
interrupts = <15 4 3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi1>;
status = "disabled";
};
};
diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi
index e085b8a..cfdf429 100644
--- a/arch/arm/boot/dts/at91sam9g45.dtsi
+++ b/arch/arm/boot/dts/at91sam9g45.dtsi
@@ -322,6 +322,24 @@
};
};
+ spi0 {
+ pinctrl_spi0: spi0-0 {
+ atmel,pins =
+ <1 0 0x1 0x0 /* PB0 periph A SPI0_MISO pin */
+ 1 1 0x1 0x0 /* PB1 periph A SPI0_MOSI pin */
+ 1 2 0x1 0x0>; /* PB2 periph A SPI0_SPCK pin */
+ };
+ };
+
+ spi1 {
+ pinctrl_spi1: spi1-0 {
+ atmel,pins =
+ <1 14 0x1 0x0 /* PB14 periph A SPI1_MISO pin */
+ 1 15 0x1 0x0 /* PB15 periph A SPI1_MOSI pin */
+ 1 16 0x1 0x0>; /* PB16 periph A SPI1_SPCK pin */
+ };
+ };
+
pioA: gpio@fffff200 {
compatible = "atmel,at91rm9200-gpio";
reg = <0xfffff200 0x200>;
@@ -538,6 +556,8 @@
compatible = "atmel,at91rm9200-spi";
reg = <0xfffa4000 0x200>;
interrupts = <14 4 3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi0>;
status = "disabled";
};
@@ -547,6 +567,8 @@
compatible = "atmel,at91rm9200-spi";
reg = <0xfffa8000 0x200>;
interrupts = <15 4 3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi1>;
status = "disabled";
};
};
diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi
index f3f87ef3..b2961f1 100644
--- a/arch/arm/boot/dts/at91sam9n12.dtsi
+++ b/arch/arm/boot/dts/at91sam9n12.dtsi
@@ -261,6 +261,24 @@
};
};
+ spi0 {
+ pinctrl_spi0: spi0-0 {
+ atmel,pins =
+ <0 11 0x1 0x0 /* PA11 periph A SPI0_MISO pin */
+ 0 12 0x1 0x0 /* PA12 periph A SPI0_MOSI pin */
+ 0 13 0x1 0x0>; /* PA13 periph A SPI0_SPCK pin */
+ };
+ };
+
+ spi1 {
+ pinctrl_spi1: spi1-0 {
+ atmel,pins =
+ <0 21 0x2 0x0 /* PA21 periph B SPI1_MISO pin */
+ 0 22 0x2 0x0 /* PA22 periph B SPI1_MOSI pin */
+ 0 23 0x2 0x0>; /* PA23 periph B SPI1_SPCK pin */
+ };
+ };
+
pioA: gpio@fffff400 {
compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
reg = <0xfffff400 0x200>;
@@ -380,6 +398,8 @@
compatible = "atmel,at91rm9200-spi";
reg = <0xf0000000 0x100>;
interrupts = <13 4 3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi0>;
status = "disabled";
};
@@ -389,6 +409,8 @@
compatible = "atmel,at91rm9200-spi";
reg = <0xf0004000 0x100>;
interrupts = <14 4 3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi1>;
status = "disabled";
};
};
diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi
index 83a4889..04fbf9d 100644
--- a/arch/arm/boot/dts/at91sam9x5.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5.dtsi
@@ -319,6 +319,24 @@
};
};
+ spi0 {
+ pinctrl_spi0: spi0-0 {
+ atmel,pins =
+ <0 11 0x1 0x0 /* PA11 periph A SPI0_MISO pin */
+ 0 12 0x1 0x0 /* PA12 periph A SPI0_MOSI pin */
+ 0 13 0x1 0x0>; /* PA13 periph A SPI0_SPCK pin */
+ };
+ };
+
+ spi1 {
+ pinctrl_spi1: spi1-0 {
+ atmel,pins =
+ <0 21 0x2 0x0 /* PA21 periph B SPI1_MISO pin */
+ 0 22 0x2 0x0 /* PA22 periph B SPI1_MOSI pin */
+ 0 23 0x2 0x0>; /* PA23 periph B SPI1_SPCK pin */
+ };
+ };
+
pioA: gpio@fffff400 {
compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
reg = <0xfffff400 0x200>;
@@ -512,6 +530,8 @@
compatible = "atmel,at91rm9200-spi";
reg = <0xf0000000 0x100>;
interrupts = <13 4 3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi0>;
status = "disabled";
};
@@ -521,6 +541,8 @@
compatible = "atmel,at91rm9200-spi";
reg = <0xf0004000 0x100>;
interrupts = <14 4 3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi1>;
status = "disabled";
};
};
--
1.7.9.5
prev parent reply other threads:[~2013-03-19 7:55 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <1363678866-3567-1-git-send-email-wenyou.yang@atmel.com>
2013-03-19 7:42 ` [PATCH v7 01/14] spi/spi-atmel: detect the capabilities of SPI core by reading the VERSION register Wenyou Yang
2013-04-01 13:38 ` Mark Brown
2013-03-19 7:43 ` [PATCH v7 02/14] spi/spi-atmel: add support transfer on CS1,2,3, not only on CS0 Wenyou Yang
2013-04-01 13:41 ` Mark Brown
2013-03-19 7:43 ` [PATCH v7 03/14] spi/spi-atmel: add physical base address Wenyou Yang
2013-04-01 13:41 ` Mark Brown
2013-04-02 5:49 ` Yang, Wenyou
2013-04-02 6:17 ` Yang, Wenyou
2013-03-19 7:44 ` [PATCH v7 04/14] spi/spi-atmel: call unmapping on transfers buffers Wenyou Yang
2013-04-01 13:43 ` Mark Brown
2013-03-19 7:45 ` [PATCH v7 05/14] spi/spi-atmel: status information passed through controller data Wenyou Yang
2013-04-01 13:43 ` Mark Brown
2013-03-19 7:46 ` [PATCH v7 06/14] spi/spi-atmel: add flag to controller data for lock operations Wenyou Yang
2013-04-01 13:46 ` Mark Brown
2013-04-03 5:09 ` Yang, Wenyou
2013-03-19 7:46 ` [PATCH v7 07/14] spi/spi-atmel: add dmaengine support Wenyou Yang
2013-03-19 7:47 ` [PATCH v7 08/14] spi/spi-atmel: fix spi-atmel driver to adapt to slave_config changes Wenyou Yang
2013-04-01 13:51 ` Mark Brown
2013-04-02 5:45 ` Yang, Wenyou
2013-03-19 7:47 ` [PATCH v7 09/14] spi/spi-atmel: correct 16 bits transfers using PIO Wenyou Yang
2013-04-01 13:53 ` Mark Brown
2013-03-19 7:49 ` [PATCH v7 10/14] spi/spi-atmel: correct 16 bits transfers with DMA Wenyou Yang
2013-04-01 13:53 ` Mark Brown
2013-04-02 5:46 ` Yang, Wenyou
2013-03-19 7:49 ` [PATCH v7 11/14] ARM: at91: add clocks for spi dt entries Wenyou Yang
2013-03-19 7:50 ` [PATCH v7 12/14] ARM: dts: add spi nodes for atmel SoC Wenyou Yang
2013-03-19 7:51 ` [PATCH v7 13/14] ARM: dts: add spi nodes for the atmel boards Wenyou Yang
2013-03-19 7:52 ` Wenyou Yang [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1363679535-4280-1-git-send-email-wenyou.yang@atmel.com \
--to=wenyou.yang@atmel.com \
--cc=JM.Lin@atmel.com \
--cc=broonie@opensource.wolfsonmicro.com \
--cc=grant.likely@secretlab.ca \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@arm.linux.org.uk \
--cc=nicolas.ferre@atmel.com \
--cc=plagnioj@jcrosoft.com \
--cc=richard.genoud@gmail.com \
--cc=spi-devel-general@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®