From: Lee Jones <lee.jones@linaro.org>
To: linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org,
broonie@opensource.wolfsonmicro.com
Cc: arnd@arndb.de, linus.walleij@stericsson.com,
Lee Jones <lee.jones@linaro.org>
Subject: [PATCH 30/46] regulator: ab8500: Supply platform specific regulator id values
Date: Thu, 21 Mar 2013 15:59:27 +0000 [thread overview]
Message-ID: <1363881583-15234-31-git-send-email-lee.jones@linaro.org> (raw)
In-Reply-To: <1363881583-15234-1-git-send-email-lee.jones@linaro.org>
The regulator ID in the regulator info array should be the same
values as the position of the element within the array.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
drivers/regulator/ab8500.c | 62 ++++++++++++++++++++++----------------------
1 file changed, 31 insertions(+), 31 deletions(-)
diff --git a/drivers/regulator/ab8500.c b/drivers/regulator/ab8500.c
index 22bac57..840f23b 100644
--- a/drivers/regulator/ab8500.c
+++ b/drivers/regulator/ab8500.c
@@ -649,7 +649,7 @@ static struct ab8500_regulator_info
.name = "LDO-AUX1",
.ops = &ab8500_regulator_volt_mode_ops,
.type = REGULATOR_VOLTAGE,
- .id = AB8500_LDO_AUX1,
+ .id = AB8505_LDO_AUX1,
.owner = THIS_MODULE,
.n_voltages = ARRAY_SIZE(ldo_vauxn_voltages),
.volt_table = ldo_vauxn_voltages,
@@ -670,7 +670,7 @@ static struct ab8500_regulator_info
.name = "LDO-AUX2",
.ops = &ab8500_regulator_volt_mode_ops,
.type = REGULATOR_VOLTAGE,
- .id = AB8500_LDO_AUX2,
+ .id = AB8505_LDO_AUX2,
.owner = THIS_MODULE,
.n_voltages = ARRAY_SIZE(ldo_vauxn_voltages),
.volt_table = ldo_vauxn_voltages,
@@ -691,7 +691,7 @@ static struct ab8500_regulator_info
.name = "LDO-AUX3",
.ops = &ab8500_regulator_volt_mode_ops,
.type = REGULATOR_VOLTAGE,
- .id = AB8500_LDO_AUX3,
+ .id = AB8505_LDO_AUX3,
.owner = THIS_MODULE,
.n_voltages = ARRAY_SIZE(ldo_vaux3_voltages),
.volt_table = ldo_vaux3_voltages,
@@ -712,7 +712,7 @@ static struct ab8500_regulator_info
.name = "LDO-AUX4",
.ops = &ab8500_regulator_volt_mode_ops,
.type = REGULATOR_VOLTAGE,
- .id = AB9540_LDO_AUX4,
+ .id = AB8505_LDO_AUX4,
.owner = THIS_MODULE,
.n_voltages = ARRAY_SIZE(ldo_vauxn_voltages),
.volt_table = ldo_vauxn_voltages,
@@ -779,7 +779,7 @@ static struct ab8500_regulator_info
.name = "LDO-INTCORE",
.ops = &ab8500_regulator_volt_mode_ops,
.type = REGULATOR_VOLTAGE,
- .id = AB8500_LDO_INTCORE,
+ .id = AB8505_LDO_INTCORE,
.owner = THIS_MODULE,
.n_voltages = ARRAY_SIZE(ldo_vintcore_voltages),
.volt_table = ldo_vintcore_voltages,
@@ -826,7 +826,7 @@ static struct ab8500_regulator_info
.name = "LDO-USB",
.ops = &ab8500_regulator_mode_ops,
.type = REGULATOR_VOLTAGE,
- .id = AB9540_LDO_USB,
+ .id = AB8505_LDO_USB,
.owner = THIS_MODULE,
.n_voltages = 1,
.volt_table = fixed_3300000_voltage,
@@ -843,7 +843,7 @@ static struct ab8500_regulator_info
.name = "LDO-AUDIO",
.ops = &ab8500_regulator_ops,
.type = REGULATOR_VOLTAGE,
- .id = AB8500_LDO_AUDIO,
+ .id = AB8505_LDO_AUDIO,
.owner = THIS_MODULE,
.n_voltages = 1,
.volt_table = fixed_2000000_voltage,
@@ -858,7 +858,7 @@ static struct ab8500_regulator_info
.name = "LDO-ANAMIC1",
.ops = &ab8500_regulator_ops,
.type = REGULATOR_VOLTAGE,
- .id = AB8500_LDO_ANAMIC1,
+ .id = AB8505_LDO_ANAMIC1,
.owner = THIS_MODULE,
.n_voltages = 1,
.volt_table = fixed_2050000_voltage,
@@ -873,7 +873,7 @@ static struct ab8500_regulator_info
.name = "LDO-ANAMIC2",
.ops = &ab8500_regulator_ops,
.type = REGULATOR_VOLTAGE,
- .id = AB8500_LDO_ANAMIC2,
+ .id = AB8505_LDO_ANAMIC2,
.owner = THIS_MODULE,
.n_voltages = 1,
.volt_table = fixed_2050000_voltage,
@@ -906,7 +906,7 @@ static struct ab8500_regulator_info
.name = "LDO-ANA",
.ops = &ab8500_regulator_mode_ops,
.type = REGULATOR_VOLTAGE,
- .id = AB8500_LDO_ANA,
+ .id = AB8505_LDO_ANA,
.owner = THIS_MODULE,
.n_voltages = 1,
.volt_table = fixed_1200000_voltage,
@@ -935,7 +935,7 @@ static struct ab8500_regulator_info
.name = "LDO-AUX1",
.ops = &ab8500_regulator_volt_mode_ops,
.type = REGULATOR_VOLTAGE,
- .id = AB8500_LDO_AUX1,
+ .id = AB9540_LDO_AUX1,
.owner = THIS_MODULE,
.n_voltages = ARRAY_SIZE(ldo_vauxn_voltages),
.volt_table = ldo_vauxn_voltages,
@@ -956,7 +956,7 @@ static struct ab8500_regulator_info
.name = "LDO-AUX2",
.ops = &ab8500_regulator_volt_mode_ops,
.type = REGULATOR_VOLTAGE,
- .id = AB8500_LDO_AUX2,
+ .id = AB9540_LDO_AUX2,
.owner = THIS_MODULE,
.n_voltages = ARRAY_SIZE(ldo_vauxn_voltages),
.volt_table = ldo_vauxn_voltages,
@@ -977,7 +977,7 @@ static struct ab8500_regulator_info
.name = "LDO-AUX3",
.ops = &ab8500_regulator_volt_mode_ops,
.type = REGULATOR_VOLTAGE,
- .id = AB8500_LDO_AUX3,
+ .id = AB9540_LDO_AUX3,
.owner = THIS_MODULE,
.n_voltages = ARRAY_SIZE(ldo_vaux3_voltages),
.volt_table = ldo_vaux3_voltages,
@@ -1021,7 +1021,7 @@ static struct ab8500_regulator_info
.name = "LDO-INTCORE",
.ops = &ab8500_regulator_volt_mode_ops,
.type = REGULATOR_VOLTAGE,
- .id = AB8500_LDO_INTCORE,
+ .id = AB9540_LDO_INTCORE,
.owner = THIS_MODULE,
.n_voltages = ARRAY_SIZE(ldo_vintcore_voltages),
.volt_table = ldo_vintcore_voltages,
@@ -1049,7 +1049,7 @@ static struct ab8500_regulator_info
.name = "LDO-TVOUT",
.ops = &ab8500_regulator_mode_ops,
.type = REGULATOR_VOLTAGE,
- .id = AB8500_LDO_TVOUT,
+ .id = AB9540_LDO_TVOUT,
.owner = THIS_MODULE,
.n_voltages = 1,
.volt_table = fixed_2000000_voltage,
@@ -1085,7 +1085,7 @@ static struct ab8500_regulator_info
.name = "LDO-AUDIO",
.ops = &ab8500_regulator_ops,
.type = REGULATOR_VOLTAGE,
- .id = AB8500_LDO_AUDIO,
+ .id = AB9540_LDO_AUDIO,
.owner = THIS_MODULE,
.n_voltages = 1,
.volt_table = fixed_2000000_voltage,
@@ -1100,7 +1100,7 @@ static struct ab8500_regulator_info
.name = "LDO-ANAMIC1",
.ops = &ab8500_regulator_ops,
.type = REGULATOR_VOLTAGE,
- .id = AB8500_LDO_ANAMIC1,
+ .id = AB9540_LDO_ANAMIC1,
.owner = THIS_MODULE,
.n_voltages = 1,
.volt_table = fixed_2050000_voltage,
@@ -1115,7 +1115,7 @@ static struct ab8500_regulator_info
.name = "LDO-ANAMIC2",
.ops = &ab8500_regulator_ops,
.type = REGULATOR_VOLTAGE,
- .id = AB8500_LDO_ANAMIC2,
+ .id = AB9540_LDO_ANAMIC2,
.owner = THIS_MODULE,
.n_voltages = 1,
.volt_table = fixed_2050000_voltage,
@@ -1130,7 +1130,7 @@ static struct ab8500_regulator_info
.name = "LDO-DMIC",
.ops = &ab8500_regulator_ops,
.type = REGULATOR_VOLTAGE,
- .id = AB8500_LDO_DMIC,
+ .id = AB9540_LDO_DMIC,
.owner = THIS_MODULE,
.n_voltages = 1,
.volt_table = fixed_1800000_voltage,
@@ -1149,7 +1149,7 @@ static struct ab8500_regulator_info
.name = "LDO-ANA",
.ops = &ab8500_regulator_mode_ops,
.type = REGULATOR_VOLTAGE,
- .id = AB8500_LDO_ANA,
+ .id = AB9540_LDO_ANA,
.owner = THIS_MODULE,
.n_voltages = 1,
.volt_table = fixed_1200000_voltage,
@@ -1178,7 +1178,7 @@ static struct ab8500_regulator_info
.name = "LDO-AUX1",
.ops = &ab8500_regulator_volt_mode_ops,
.type = REGULATOR_VOLTAGE,
- .id = AB8500_LDO_AUX1,
+ .id = AB8540_LDO_AUX1,
.owner = THIS_MODULE,
.n_voltages = ARRAY_SIZE(ldo_vauxn_voltages),
.volt_table = ldo_vauxn_voltages,
@@ -1199,7 +1199,7 @@ static struct ab8500_regulator_info
.name = "LDO-AUX2",
.ops = &ab8500_regulator_volt_mode_ops,
.type = REGULATOR_VOLTAGE,
- .id = AB8500_LDO_AUX2,
+ .id = AB8540_LDO_AUX2,
.owner = THIS_MODULE,
.n_voltages = ARRAY_SIZE(ldo_vauxn_voltages),
.volt_table = ldo_vauxn_voltages,
@@ -1220,7 +1220,7 @@ static struct ab8500_regulator_info
.name = "LDO-AUX3",
.ops = &ab8500_regulator_volt_mode_ops,
.type = REGULATOR_VOLTAGE,
- .id = AB8500_LDO_AUX3,
+ .id = AB8540_LDO_AUX3,
.owner = THIS_MODULE,
.n_voltages = ARRAY_SIZE(ldo_vaux3_ab8540_voltages),
.volt_table = ldo_vaux3_ab8540_voltages,
@@ -1241,7 +1241,7 @@ static struct ab8500_regulator_info
.name = "LDO-AUX4",
.ops = &ab8500_regulator_volt_mode_ops,
.type = REGULATOR_VOLTAGE,
- .id = AB9540_LDO_AUX4,
+ .id = AB8540_LDO_AUX4,
.owner = THIS_MODULE,
.n_voltages = ARRAY_SIZE(ldo_vauxn_voltages),
.volt_table = ldo_vauxn_voltages,
@@ -1264,7 +1264,7 @@ static struct ab8500_regulator_info
.name = "LDO-INTCORE",
.ops = &ab8500_regulator_volt_mode_ops,
.type = REGULATOR_VOLTAGE,
- .id = AB8500_LDO_INTCORE,
+ .id = AB8540_LDO_INTCORE,
.owner = THIS_MODULE,
.n_voltages = ARRAY_SIZE(ldo_vintcore_voltages),
.volt_table = ldo_vintcore_voltages,
@@ -1292,7 +1292,7 @@ static struct ab8500_regulator_info
.name = "LDO-TVOUT",
.ops = &ab8500_regulator_mode_ops,
.type = REGULATOR_VOLTAGE,
- .id = AB8500_LDO_TVOUT,
+ .id = AB8540_LDO_TVOUT,
.owner = THIS_MODULE,
.n_voltages = 1,
},
@@ -1310,7 +1310,7 @@ static struct ab8500_regulator_info
.name = "LDO-AUDIO",
.ops = &ab8500_regulator_ops,
.type = REGULATOR_VOLTAGE,
- .id = AB8500_LDO_AUDIO,
+ .id = AB8540_LDO_AUDIO,
.owner = THIS_MODULE,
.n_voltages = 1,
.volt_table = fixed_2000000_voltage,
@@ -1325,7 +1325,7 @@ static struct ab8500_regulator_info
.name = "LDO-ANAMIC1",
.ops = &ab8500_regulator_ops,
.type = REGULATOR_VOLTAGE,
- .id = AB8500_LDO_ANAMIC1,
+ .id = AB8540_LDO_ANAMIC1,
.owner = THIS_MODULE,
.n_voltages = 1,
.volt_table = fixed_2050000_voltage,
@@ -1340,7 +1340,7 @@ static struct ab8500_regulator_info
.name = "LDO-ANAMIC2",
.ops = &ab8500_regulator_ops,
.type = REGULATOR_VOLTAGE,
- .id = AB8500_LDO_ANAMIC2,
+ .id = AB8540_LDO_ANAMIC2,
.owner = THIS_MODULE,
.n_voltages = 1,
.volt_table = fixed_2050000_voltage,
@@ -1355,7 +1355,7 @@ static struct ab8500_regulator_info
.name = "LDO-DMIC",
.ops = &ab8500_regulator_ops,
.type = REGULATOR_VOLTAGE,
- .id = AB8500_LDO_DMIC,
+ .id = AB8540_LDO_DMIC,
.owner = THIS_MODULE,
.n_voltages = 1,
},
@@ -1373,7 +1373,7 @@ static struct ab8500_regulator_info
.name = "LDO-ANA",
.ops = &ab8500_regulator_mode_ops,
.type = REGULATOR_VOLTAGE,
- .id = AB8500_LDO_ANA,
+ .id = AB8540_LDO_ANA,
.owner = THIS_MODULE,
.n_voltages = 1,
.volt_table = fixed_1200000_voltage,
--
1.7.10.4
next prev parent reply other threads:[~2013-03-21 16:06 UTC|newest]
Thread overview: 62+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-03-21 15:58 [PATCH 00/46] Regulators: Bring the AB8500 into the 21st century Lee Jones
2013-03-21 15:58 ` [PATCH 01/46] regulator: ab8500: Further populate initialisation registers Lee Jones
2013-03-21 15:58 ` [PATCH 02/46] regulator: ab8500: Add set_mode/get_mode support Lee Jones
2013-03-21 15:59 ` [PATCH 03/46] regulator: ab8500: Added get_optimum_mode on regulators with idle mode Lee Jones
2013-03-21 15:59 ` [PATCH 04/46] ARM: ux500: regulators: Add mask for configuration Lee Jones
2013-03-21 15:59 ` [PATCH 05/46] regulator: ab8500: Another push to synchronise recent AB8500 developments Lee Jones
2013-03-21 15:59 ` [PATCH 06/46] regulator: ab8500: Separate regulator and MFD platform data Lee Jones
2013-03-22 11:04 ` Mark Brown
2013-03-21 15:59 ` [PATCH 07/46] regulator: ab8500: Add support of low voltage battery Lee Jones
2013-03-28 0:06 ` Mark Brown
2013-03-21 15:59 ` [PATCH 08/46] ARM: ux500: Update displays in vaux1 consumer list Lee Jones
2013-03-28 0:07 ` Mark Brown
2013-03-21 15:59 ` [PATCH 09/46] regulator: ab8500-ext: Add HW request support Lee Jones
2013-03-21 15:59 ` [PATCH 10/46] regulator: ab8500-ext: Add suspend support Lee Jones
2013-03-21 15:59 ` [PATCH 11/46] regulator: ab8500: Remove USB regulator Lee Jones
2013-03-21 15:59 ` [PATCH 12/46] regulator: ab8500: Init debug from regulator driver Lee Jones
2013-03-21 15:59 ` [PATCH 13/46] ARM: ux500: Add supply for the L3G4200D Gyroscope Lee Jones
2013-03-28 0:09 ` Mark Brown
2013-03-21 15:59 ` [PATCH 14/46] ARM: ux500: Add supply for the Ambient light sensor device Lee Jones
2013-03-28 0:09 ` Mark Brown
2013-03-21 15:59 ` [PATCH 15/46] ARM: ux500: Add supply for the Pressure sensor Lee Jones
2013-03-28 0:10 ` Mark Brown
2013-03-21 15:59 ` [PATCH 16/46] ARM: ux500: Add supply for the Cypress TrueTouch Touchscreen Lee Jones
2013-03-28 0:10 ` Mark Brown
2013-03-21 15:59 ` [PATCH 17/46] ARM: ux500: regulators: List the MMIO camera as a consumer of VAUX1 Lee Jones
2013-03-28 0:10 ` Mark Brown
2013-03-21 15:59 ` [PATCH 18/46] regulator: ab8500: Clean out SoC registers Lee Jones
2013-03-28 0:11 ` Mark Brown
2013-03-21 15:59 ` [PATCH 19/46] regulator: ab8500: Prepare the driver for additional platforms Lee Jones
2013-03-21 15:59 ` [PATCH 20/46] regulator: ab8500: Add support for the ab9540 Lee Jones
2013-03-21 15:59 ` [PATCH 21/46] regulator: ab8500: Correct TVOUT regulator start-up delay Lee Jones
2013-03-28 0:13 ` Mark Brown
2013-03-21 15:59 ` [PATCH 22/46] regulator: ab8500-ext: Add support for AB8505/AB9540 Lee Jones
2013-03-21 15:59 ` [PATCH 23/46] regulator: ab8500: add support for ab8505 Lee Jones
2013-03-21 15:59 ` [PATCH 24/46] ARM: ux500: regulator: Add accelerometer and fix magnetometer supply device ID Lee Jones
2013-03-28 0:15 ` Mark Brown
2013-03-21 15:59 ` [PATCH 25/46] regulator: ab8500-ext: Add support for AB9540 regulators Lee Jones
2013-03-21 15:59 ` [PATCH 26/46] regulator: ab8500: Add support for the ab8540 Lee Jones
2013-03-21 15:59 ` [PATCH 27/46] regulator: ab8500: Update voltage handling for fixed voltage regulators Lee Jones
2013-03-21 15:59 ` [PATCH 28/46] regulator: ab8500: Delete useless fixed_uV field Lee Jones
2013-03-28 0:16 ` Mark Brown
2013-03-21 15:59 ` [PATCH 29/46] regulator: ab8500: Use regulator_list_voltage_table() Lee Jones
2013-03-21 15:59 ` Lee Jones [this message]
2013-03-21 15:59 ` [PATCH 31/46] regulator: ab8500: Don't register external regulators on AB8505 Lee Jones
2013-03-21 15:59 ` [PATCH 32/46] regulator: ab8500: Add voltage selection for AUDIO and ANA " Lee Jones
2013-03-21 15:59 ` [PATCH 33/46] regulator: ab8500: Also check for AB8505 based platforms Lee Jones
2013-03-21 15:59 ` [PATCH 34/46] regulator: ab8500: Add new operations for Vaux3 Lee Jones
2013-03-21 15:59 ` [PATCH 35/46] regulator: ab8500: Add mode operation for v-amic Lee Jones
2013-03-21 15:59 ` [PATCH 36/46] regulator: ab8500: Update vdmic, vamic[1|2] parameters for AB8540 Lee Jones
2013-03-21 15:59 ` [PATCH 37/46] regulator: ab8500-ext: Adapt regulator registration for newly changed API Lee Jones
2013-03-28 0:18 ` Mark Brown
2013-03-21 15:59 ` [PATCH 38/46] regulator: ab8500: Use a struct to select the good regulator configuration Lee Jones
2013-03-21 15:59 ` [PATCH 39/46] regulator: ab8500: Introduce aux5, aux6 regulators for AB8540 Lee Jones
2013-03-21 15:59 ` [PATCH 40/46] regulator: ab8500: Set enable enable_time in regulator_desc Lee Jones
2013-03-21 15:59 ` [PATCH 41/46] regulator: ab8500: Remove the need for a 'delay' property Lee Jones
2013-03-21 15:59 ` [PATCH 42/46] regulator: ab8500: Use regulator_list_voltage_table() to look-up voltages Lee Jones
2013-03-21 15:59 ` [PATCH 43/46] ARM: ux500: Pass regulator platform data using the new format Lee Jones
2013-03-21 15:59 ` [PATCH 44/46] regulator: ab8500: Amend the update value for AB8500_LDO_INTCORE regulator Lee Jones
2013-03-28 0:20 ` Mark Brown
2013-03-21 15:59 ` [PATCH 45/46] regulator: ab8500: Shuffle init functions into a more logical order Lee Jones
2013-03-21 15:59 ` [PATCH 46/46] ARM: ux500: Regulators: Bring the AB8500 regulator platform data up-to-date Lee Jones
2013-03-28 0:22 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1363881583-15234-31-git-send-email-lee.jones@linaro.org \
--to=lee.jones@linaro.org \
--cc=arnd@arndb.de \
--cc=broonie@opensource.wolfsonmicro.com \
--cc=linus.walleij@stericsson.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®