From: Maxime Ripard <maxime.ripard@free-electrons.com>
To: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: [PATCH] pinctrl: sunxi: Rename wemac functions to emac
Date: Wed, 27 Mar 2013 14:12:33 +0100 [thread overview]
Message-ID: <1364389953-20688-1-git-send-email-maxime.ripard@free-electrons.com> (raw)
The pin functions associated to the ethernet controller were introduced
with the label "wemac", which was the name of the ethernet driver in the
allwinner source tree, while the real name of the IP is actually "emac",
as advertised in several documents including the datasheet.
Since this is part of the device tree bindings, and that these part of
the bindings have not yet be released in a kernel version, it seems like
the good timing to change it and assure consistency.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
---
drivers/pinctrl/pinctrl-sunxi.c | 36 ++++++++++++++++++------------------
1 file changed, 18 insertions(+), 18 deletions(-)
diff --git a/drivers/pinctrl/pinctrl-sunxi.c b/drivers/pinctrl/pinctrl-sunxi.c
index 3e41cd1..5a15ce4 100644
--- a/drivers/pinctrl/pinctrl-sunxi.c
+++ b/drivers/pinctrl/pinctrl-sunxi.c
@@ -31,101 +31,101 @@ static const struct sunxi_desc_pin sun4i_a10_pins[] = {
SUNXI_PIN(SUNXI_PINCTRL_PIN_PA0,
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
- SUNXI_FUNCTION(0x2, "wemac"), /* ERXD3 */
+ SUNXI_FUNCTION(0x2, "emac"), /* ERXD3 */
SUNXI_FUNCTION(0x3, "spi1"), /* CS0 */
SUNXI_FUNCTION(0x4, "uart2")), /* RTS */
SUNXI_PIN(SUNXI_PINCTRL_PIN_PA1,
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
- SUNXI_FUNCTION(0x2, "wemac"), /* ERXD2 */
+ SUNXI_FUNCTION(0x2, "emac"), /* ERXD2 */
SUNXI_FUNCTION(0x3, "spi1"), /* CLK */
SUNXI_FUNCTION(0x4, "uart2")), /* CTS */
SUNXI_PIN(SUNXI_PINCTRL_PIN_PA2,
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
- SUNXI_FUNCTION(0x2, "wemac"), /* ERXD1 */
+ SUNXI_FUNCTION(0x2, "emac"), /* ERXD1 */
SUNXI_FUNCTION(0x3, "spi1"), /* MOSI */
SUNXI_FUNCTION(0x4, "uart2")), /* TX */
SUNXI_PIN(SUNXI_PINCTRL_PIN_PA3,
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
- SUNXI_FUNCTION(0x2, "wemac"), /* ERXD0 */
+ SUNXI_FUNCTION(0x2, "emac"), /* ERXD0 */
SUNXI_FUNCTION(0x3, "spi1"), /* MISO */
SUNXI_FUNCTION(0x4, "uart2")), /* RX */
SUNXI_PIN(SUNXI_PINCTRL_PIN_PA4,
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
- SUNXI_FUNCTION(0x2, "wemac"), /* ETXD3 */
+ SUNXI_FUNCTION(0x2, "emac"), /* ETXD3 */
SUNXI_FUNCTION(0x3, "spi1")), /* CS1 */
SUNXI_PIN(SUNXI_PINCTRL_PIN_PA5,
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
- SUNXI_FUNCTION(0x2, "wemac"), /* ETXD2 */
+ SUNXI_FUNCTION(0x2, "emac"), /* ETXD2 */
SUNXI_FUNCTION(0x3, "spi3")), /* CS0 */
SUNXI_PIN(SUNXI_PINCTRL_PIN_PA6,
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
- SUNXI_FUNCTION(0x2, "wemac"), /* ETXD1 */
+ SUNXI_FUNCTION(0x2, "emac"), /* ETXD1 */
SUNXI_FUNCTION(0x3, "spi3")), /* CLK */
SUNXI_PIN(SUNXI_PINCTRL_PIN_PA7,
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
- SUNXI_FUNCTION(0x2, "wemac"), /* ETXD0 */
+ SUNXI_FUNCTION(0x2, "emac"), /* ETXD0 */
SUNXI_FUNCTION(0x3, "spi3")), /* MOSI */
SUNXI_PIN(SUNXI_PINCTRL_PIN_PA8,
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
- SUNXI_FUNCTION(0x2, "wemac"), /* ERXCK */
+ SUNXI_FUNCTION(0x2, "emac"), /* ERXCK */
SUNXI_FUNCTION(0x3, "spi3")), /* MISO */
SUNXI_PIN(SUNXI_PINCTRL_PIN_PA9,
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
- SUNXI_FUNCTION(0x2, "wemac"), /* ERXERR */
+ SUNXI_FUNCTION(0x2, "emac"), /* ERXERR */
SUNXI_FUNCTION(0x3, "spi3")), /* CS1 */
SUNXI_PIN(SUNXI_PINCTRL_PIN_PA10,
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
- SUNXI_FUNCTION(0x2, "wemac"), /* ERXDV */
+ SUNXI_FUNCTION(0x2, "emac"), /* ERXDV */
SUNXI_FUNCTION(0x4, "uart1")), /* TX */
SUNXI_PIN(SUNXI_PINCTRL_PIN_PA11,
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
- SUNXI_FUNCTION(0x2, "wemac"), /* EMDC */
+ SUNXI_FUNCTION(0x2, "emac"), /* EMDC */
SUNXI_FUNCTION(0x4, "uart1")), /* RX */
SUNXI_PIN(SUNXI_PINCTRL_PIN_PA12,
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
- SUNXI_FUNCTION(0x2, "wemac"), /* EMDIO */
+ SUNXI_FUNCTION(0x2, "emac"), /* EMDIO */
SUNXI_FUNCTION(0x3, "uart6"), /* TX */
SUNXI_FUNCTION(0x4, "uart1")), /* RTS */
SUNXI_PIN(SUNXI_PINCTRL_PIN_PA13,
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
- SUNXI_FUNCTION(0x2, "wemac"), /* ETXEN */
+ SUNXI_FUNCTION(0x2, "emac"), /* ETXEN */
SUNXI_FUNCTION(0x3, "uart6"), /* RX */
SUNXI_FUNCTION(0x4, "uart1")), /* CTS */
SUNXI_PIN(SUNXI_PINCTRL_PIN_PA14,
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
- SUNXI_FUNCTION(0x2, "wemac"), /* ETXCK */
+ SUNXI_FUNCTION(0x2, "emac"), /* ETXCK */
SUNXI_FUNCTION(0x3, "uart7"), /* TX */
SUNXI_FUNCTION(0x4, "uart1")), /* DTR */
SUNXI_PIN(SUNXI_PINCTRL_PIN_PA15,
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
- SUNXI_FUNCTION(0x2, "wemac"), /* ECRS */
+ SUNXI_FUNCTION(0x2, "emac"), /* ECRS */
SUNXI_FUNCTION(0x3, "uart7"), /* RX */
SUNXI_FUNCTION(0x4, "uart1")), /* DSR */
SUNXI_PIN(SUNXI_PINCTRL_PIN_PA16,
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
- SUNXI_FUNCTION(0x2, "wemac"), /* ECOL */
+ SUNXI_FUNCTION(0x2, "emac"), /* ECOL */
SUNXI_FUNCTION(0x3, "can"), /* TX */
SUNXI_FUNCTION(0x4, "uart1")), /* DCD */
SUNXI_PIN(SUNXI_PINCTRL_PIN_PA17,
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
- SUNXI_FUNCTION(0x2, "wemac"), /* ETXERR */
+ SUNXI_FUNCTION(0x2, "emac"), /* ETXERR */
SUNXI_FUNCTION(0x3, "can"), /* RX */
SUNXI_FUNCTION(0x4, "uart1")), /* RING */
/* Hole */
--
1.7.10.4
next reply other threads:[~2013-03-27 13:12 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-03-27 13:12 Maxime Ripard [this message]
2013-04-08 20:47 ` Maxime Ripard
2013-04-09 8:48 ` Linus Walleij
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1364389953-20688-1-git-send-email-maxime.ripard@free-electrons.com \
--to=maxime.ripard@free-electrons.com \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®