mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Venu Byravarasu <vbyravarasu@nvidia.com>
To: <gregkh@linuxfoundation.org>, <balbi@ti.com>,
	<stern@rowland.harvard.edu>, <linux-tegra@vger.kernel.org>,
	<swarren@wwwdotorg.org>
Cc: <linux-usb@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	Venu Byravarasu <vbyravarasu@nvidia.com>
Subject: [PATCH v2 6/7] usb: phy: tegra: Add error handling & clean up.
Date: Wed, 3 Apr 2013 14:11:41 +0530	[thread overview]
Message-ID: <1364978502-22887-7-git-send-email-vbyravarasu@nvidia.com> (raw)
In-Reply-To: <1364978502-22887-1-git-send-email-vbyravarasu@nvidia.com>

Check return values from all GPIO APIs and handle errors accordingly.
Remove clk_disable_unprepare which is no more needed.

Signed-off-by: Venu Byravarasu <vbyravarasu@nvidia.com>
---
delta from v2: no change.

 drivers/usb/phy/phy-tegra-usb.c |   50 ++++++++++++++++++++++++++++++--------
 1 files changed, 39 insertions(+), 11 deletions(-)

diff --git a/drivers/usb/phy/phy-tegra-usb.c b/drivers/usb/phy/phy-tegra-usb.c
index a2a89a9..01c5e23 100644
--- a/drivers/usb/phy/phy-tegra-usb.c
+++ b/drivers/usb/phy/phy-tegra-usb.c
@@ -542,9 +542,17 @@ static int ulpi_phy_power_on(struct tegra_usb_phy *phy)
 	unsigned long val;
 	void __iomem *base = phy->regs;
 
-	gpio_direction_output(phy->reset_gpio, 0);
+	ret = gpio_direction_output(phy->reset_gpio, 0);
+	if (ret < 0) {
+		dev_err(phy->dev, "gpio %d direction not set\n", phy->reset_gpio);
+		return ret;
+	}
 	msleep(5);
-	gpio_direction_output(phy->reset_gpio, 1);
+	ret = gpio_direction_output(phy->reset_gpio, 1);
+	if (ret < 0) {
+		dev_err(phy->dev, "gpio %d direction not set\n", phy->reset_gpio);
+		return ret;
+	}
 
 	clk_prepare_enable(phy->clk);
 	msleep(1);
@@ -624,24 +632,44 @@ static int	tegra_phy_init(struct usb_phy *x)
 			of_get_named_gpio(phy->dev->of_node,
 					  "nvidia,phy-reset-gpio", 0);
 		if (!gpio_is_valid(phy->reset_gpio)) {
-			pr_err("%s: invalid reset gpio: %d\n", __func__,
+			dev_err(phy->dev, "invalid gpio: %d\n",
+				phy->reset_gpio);
+			err = phy->reset_gpio;
+			goto cleanup_clk_get;
+		}
+
+		err = gpio_request(phy->reset_gpio, "ulpi_phy_reset_b");
+		if (err < 0) {
+			dev_err(phy->dev, "request failed for gpio: %d\n",
 			       phy->reset_gpio);
-			err = -EINVAL;
-			goto err1;
+			goto cleanup_clk_get;
+		}
+
+		err = gpio_direction_output(phy->reset_gpio, 0);
+		if (err < 0) {
+			dev_err(phy->dev, "gpio %d direction not set to output\n",
+			       phy->reset_gpio);
+			goto cleanup_gpio_req;
 		}
-		gpio_request(phy->reset_gpio, "ulpi_phy_reset_b");
-		gpio_direction_output(phy->reset_gpio, 0);
+
 		phy->ulpi = otg_ulpi_create(&ulpi_viewport_access_ops, 0);
+		if (!phy->ulpi) {
+			dev_err(phy->dev, "otg_ulpi_create returned err\n");
+			err = -ENOMEM;
+			goto cleanup_gpio_req;
+		}
+
 		phy->ulpi->io_priv = phy->regs + ULPI_VIEWPORT;
 	} else {
 		err = utmip_pad_open(phy);
 		if (err < 0)
-			goto err1;
+			return err;
 	}
 	return 0;
-err1:
-	clk_disable_unprepare(phy->pll_u);
-	clk_put(phy->pll_u);
+cleanup_gpio_req:
+	gpio_free(phy->reset_gpio);
+cleanup_clk_get:
+	clk_put(phy->clk);
 	return err;
 }
 
-- 
1.7.0.4


  parent reply	other threads:[~2013-04-03  8:47 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-04-03  8:41 [PATCH v2 0/7] Tegra USB PHY driver series Venu Byravarasu
2013-04-03  8:41 ` [PATCH v2 1/7] ARM: tegra: finalize USB EHCI and PHY bindings Venu Byravarasu
2013-04-03 19:07   ` Stephen Warren
2013-04-04 12:21     ` Venu Byravarasu
2013-04-03  8:41 ` [PATCH v2 2/7] ARM: tegra: update device trees for USB binding rework Venu Byravarasu
2013-04-03 19:16   ` Stephen Warren
2013-04-04 13:01     ` Venu Byravarasu
2013-04-04 18:01       ` Stephen Warren
2013-04-03 19:33   ` Stephen Warren
2013-04-03  8:41 ` [PATCH v2 3/7] usb: phy: tegra: Get PHY mode using DT Venu Byravarasu
2013-04-03  8:41 ` [PATCH v2 4/7] usb: phy: tegra: Return correct error value provided by clk_get_sys Venu Byravarasu
2013-04-03  8:41 ` [PATCH v2 5/7] usb: phy: tegra: get ULPI reset GPIO info using DT Venu Byravarasu
2013-04-03  8:41 ` Venu Byravarasu [this message]
2013-04-03 19:35   ` [PATCH v2 6/7] usb: phy: tegra: Add error handling & clean up Stephen Warren
2013-04-04 12:29     ` Venu Byravarasu
2013-04-03  8:41 ` [PATCH v2 7/7] usb: phy: registering Tegra USB PHY as platform driver Venu Byravarasu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1364978502-22887-7-git-send-email-vbyravarasu@nvidia.com \
    --to=vbyravarasu@nvidia.com \
    --cc=balbi@ti.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-tegra@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=stern@rowland.harvard.edu \
    --cc=swarren@wwwdotorg.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®