[PATCH 1/3] usb: phy: ab8500-usb: check regulator_enable return value

[Fabio Baltieri <fabio.baltieri@linaro.org>]

Since regulator_enable() is going to be marked as __must_check in the
next merge window, always check regulator_enable() return value and
print a warning if it fails.

Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Fabio Baltieri <fabio.baltieri@linaro.org>
---
 drivers/usb/phy/phy-ab8500-usb.c | 12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)

diff --git a/drivers/usb/phy/phy-ab8500-usb.c b/drivers/usb/phy/phy-ab8500-usb.c
index b8115b0..ac27ed2 100644
--- a/drivers/usb/phy/phy-ab8500-usb.c
+++ b/drivers/usb/phy/phy-ab8500-usb.c
@@ -170,7 +170,9 @@ static void ab8500_usb_regulator_enable(struct ab8500_usb *ab)
 {
 	int ret, volt;
 
-	regulator_enable(ab->v_ape);
+	ret = regulator_enable(ab->v_ape);
+	if (ret)
+		dev_err(ab->dev, "Failed to enable v-ape\n");
 
 	if (!is_ab8500_2p0_or_earlier(ab->ab8500)) {
 		ab->saved_v_ulpi = regulator_get_voltage(ab->v_ulpi);
@@ -188,7 +190,9 @@ static void ab8500_usb_regulator_enable(struct ab8500_usb *ab)
 					ret);
 	}
 
-	regulator_enable(ab->v_ulpi);
+	ret = regulator_enable(ab->v_ulpi);
+	if (ret)
+		dev_err(ab->dev, "Failed to enable vddulpivio18\n");
 
 	if (!is_ab8500_2p0_or_earlier(ab->ab8500)) {
 		volt = regulator_get_voltage(ab->v_ulpi);
@@ -197,7 +201,9 @@ static void ab8500_usb_regulator_enable(struct ab8500_usb *ab)
 					volt);
 	}
 
-	regulator_enable(ab->v_musb);
+	ret = regulator_enable(ab->v_musb);
+	if (ret)
+		dev_err(ab->dev, "Failed to enable musb_1v8\n");
 }
 
 static void ab8500_usb_regulator_disable(struct ab8500_usb *ab)
-- 
1.8.1.3