From: Christian Ruppert <christian.ruppert@abilis.com>
To: linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Cc: linux-doc@vger.kernel.org, devicetree-discuss@lists.ozlabs.org,
Mike Turquette <mturquette@linaro.org>,
Rob Landley <rob@landley.net>,
Rob Herring <rob.herring@calxeda.com>,
Grant Likely <grant.likely@secretlab.ca>,
Christian Ruppert <christian.ruppert@abilis.com>
Subject: [PATCH] clk: Add device tree binding to clk-fixed-factor
Date: Wed, 10 Apr 2013 17:40:43 +0200 [thread overview]
Message-ID: <1365608443-30350-1-git-send-email-christian.ruppert@abilis.com> (raw)
This patch adds a device tree binding for the simple fixed factor clock
divider/multiplier of the common clock tree binding.
Signed-off-by: Christian Ruppert <christian.ruppert@abilis.com>
---
.../bindings/clock/fixed-factor-clkdiv.txt | 24 +++++++++++++++
drivers/clk/clk-fixed-factor.c | 32 ++++++++++++++++++++
include/linux/clk-provider.h | 1 +
3 files changed, 57 insertions(+), 0 deletions(-)
create mode 100644 Documentation/devicetree/bindings/clock/fixed-factor-clkdiv.txt
diff --git a/Documentation/devicetree/bindings/clock/fixed-factor-clkdiv.txt b/Documentation/devicetree/bindings/clock/fixed-factor-clkdiv.txt
new file mode 100644
index 0000000..352bac4
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/fixed-factor-clkdiv.txt
@@ -0,0 +1,24 @@
+Device Tree Clock bindings for plat-tb10x
+
+This binding uses the common clock binding[1].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible : shall be "fixed-factor-clkdiv"
+- #clock-cells: from common clock binding; shall be set to 0
+- clocks: shall be the input parent clock phandle for the clock.
+- clock-mult: defines the multiplication factor of the output clock frequency
+ wrt. the input clock frequency.
+- clock-div: defines the division factor of the output clock frequency wrt.
+ the input clock frequency.
+
+Example:
+cpu_clk: clkdiv_cpu { /* CPU clock derived from pll0. 1/2 of pll frequency */
+ compatible = "fixed-factor-clkdiv";
+ #clock-cells = <0>;
+ clocks = <&pll0>;
+ clock-mult = <1>;
+ clock-div = <2>;
+ clock-output-names = "cpu_clk";
+};
diff --git a/drivers/clk/clk-fixed-factor.c b/drivers/clk/clk-fixed-factor.c
index 1ef271e..85e45f1 100644
--- a/drivers/clk/clk-fixed-factor.c
+++ b/drivers/clk/clk-fixed-factor.c
@@ -11,6 +11,7 @@
#include <linux/clk-provider.h>
#include <linux/slab.h>
#include <linux/err.h>
+#include <linux/of.h>
/*
* DOC: basic fixed multiplier and divider clock that cannot gate
@@ -96,3 +97,34 @@ struct clk *clk_register_fixed_factor(struct device *dev, const char *name,
return clk;
}
+
+#ifdef CONFIG_OF
+/**
+ * of_fixed_factor_clkdiv_setup() - Set up simple fixed factor clock divider
+ */
+void of_fixed_factor_clkdiv_setup(struct device_node *node)
+{
+ struct clk *clk;
+ const char *clk_name = node->name;
+ const char *parent_name;
+ u32 mult, div;
+
+ if (of_property_read_u32(node, "clock-mult", &mult))
+ return;
+
+ if (of_property_read_u32(node, "clock-div", &div))
+ return;
+
+ parent_name = of_clk_get_parent_name(node, 0);
+
+ of_property_read_string(node, "clock-output-names", &clk_name);
+
+ clk = clk_register_fixed_factor(NULL, clk_name, parent_name, 0,
+ mult, div);
+ if (!IS_ERR(clk))
+ of_clk_add_provider(node, of_clk_src_simple_get, clk);
+}
+EXPORT_SYMBOL_GPL(of_fixed_factor_clkdiv_setup);
+CLK_OF_DECLARE(fixed_clkdiv, "fixed-factor-clkdiv",
+ of_fixed_factor_clkdiv_setup);
+#endif
diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h
index 7f197d7..d4937cf 100644
--- a/include/linux/clk-provider.h
+++ b/include/linux/clk-provider.h
@@ -184,6 +184,7 @@ struct clk *clk_register_fixed_rate(struct device *dev, const char *name,
unsigned long fixed_rate);
void of_fixed_clk_setup(struct device_node *np);
+void of_fixed_factor_clkdiv_setup(struct device_node *node);
/**
* struct clk_gate - gating clock
--
1.7.1
next reply other threads:[~2013-04-10 15:41 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-04-10 15:40 Christian Ruppert [this message]
2013-04-10 15:56 ` Gregory CLEMENT
2013-04-10 16:27 ` Christian Ruppert
2013-04-11 9:19 ` Christian Ruppert
2013-04-11 16:26 ` Gregory CLEMENT
2013-04-12 6:54 ` Christian Ruppert
2013-04-12 7:05 ` Gregory CLEMENT
2013-04-12 9:04 ` Gregory CLEMENT
2013-04-12 9:12 ` Christian Ruppert
2013-04-12 9:46 ` Gregory CLEMENT
2013-04-12 10:36 ` [PATCH] ARC: [TB10x] Adapt device tree to new compatible string Christian Ruppert
2013-04-12 10:38 ` Vineet Gupta
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1365608443-30350-1-git-send-email-christian.ruppert@abilis.com \
--to=christian.ruppert@abilis.com \
--cc=devicetree-discuss@lists.ozlabs.org \
--cc=grant.likely@secretlab.ca \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-doc@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mturquette@linaro.org \
--cc=rob.herring@calxeda.com \
--cc=rob@landley.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®