From: Girish K S <girishks2000@gmail.com>
To: spi-devel-general@lists.sourceforge.net,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Cc: grant.likely@secretlab.ca, t.figa@samsung.com,
broonie@opensource.wolfsonmicro.com,
Girish K S <girishks2000@gmail.com>
Subject: [PATCH 2/3] spi: s3c64xx: Added provision for dedicated cs pin
Date: Mon, 22 Apr 2013 12:39:24 +0530 [thread overview]
Message-ID: <1366614565-3743-3-git-send-email-ks.giri@samsung.com> (raw)
In-Reply-To: <1366614565-3743-1-git-send-email-ks.giri@samsung.com>
From: Girish K S <girishks2000@gmail.com>
The existing driver supports gpio based /cs signal.
For controller's that have one device per controller,
the slave device's /cs signal might be internally controlled
by the chip select bit of slave select register. They are not
externally asserted/deasserted using gpio pin.
This patch adds support for controllers with dedicated /cs pin.
if "cs-gpio" property doesnt exist in a spi dts node, the controller
would treat the /cs pin as dedicated.
Signed-off-by: Girish K S <ks.giri@samsung.com>
---
drivers/spi/spi-s3c64xx.c | 32 ++++++++++++++++++++++++--------
1 files changed, 24 insertions(+), 8 deletions(-)
diff --git a/drivers/spi/spi-s3c64xx.c b/drivers/spi/spi-s3c64xx.c
index 665fe2b..07f9e00 100644
--- a/drivers/spi/spi-s3c64xx.c
+++ b/drivers/spi/spi-s3c64xx.c
@@ -208,6 +208,7 @@ struct s3c64xx_spi_driver_data {
struct s3c64xx_spi_port_config *port_conf;
unsigned int port_id;
unsigned long gpios[4];
+ bool cs_gpio;
};
static void flush_fifo(struct s3c64xx_spi_driver_data *sdd)
@@ -570,14 +571,16 @@ static inline void enable_cs(struct s3c64xx_spi_driver_data *sdd,
if (sdd->tgl_spi != spi) { /* if last mssg on diff device */
/* Deselect the last toggled device */
cs = sdd->tgl_spi->controller_data;
- gpio_set_value(cs->line,
- spi->mode & SPI_CS_HIGH ? 0 : 1);
+ if (sdd->cs_gpio)
+ gpio_set_value(cs->line,
+ spi->mode & SPI_CS_HIGH ? 0 : 1);
}
sdd->tgl_spi = NULL;
}
cs = spi->controller_data;
- gpio_set_value(cs->line, spi->mode & SPI_CS_HIGH ? 1 : 0);
+ if (sdd->cs_gpio)
+ gpio_set_value(cs->line, spi->mode & SPI_CS_HIGH ? 1 : 0);
/* Start the signals */
writel(0, sdd->regs + S3C64XX_SPI_SLAVE_SEL);
@@ -706,7 +709,8 @@ static inline void disable_cs(struct s3c64xx_spi_driver_data *sdd,
if (sdd->tgl_spi == spi)
sdd->tgl_spi = NULL;
- gpio_set_value(cs->line, spi->mode & SPI_CS_HIGH ? 0 : 1);
+ if (sdd->cs_gpio)
+ gpio_set_value(cs->line, spi->mode & SPI_CS_HIGH ? 0 : 1);
/* Quiese the signals */
writel(S3C64XX_SPI_SLAVE_SIG_INACT, sdd->regs + S3C64XX_SPI_SLAVE_SEL);
@@ -1015,7 +1019,10 @@ static struct s3c64xx_spi_csinfo *s3c64xx_get_slave_ctrldata(
return ERR_PTR(-ENOMEM);
}
- cs->line = of_get_named_gpio(data_np, "cs-gpio", 0);
+ /* The CS line is asserted/deasserted by the gpio pin */
+ if (sdd->cs_gpio)
+ cs->line = of_get_named_gpio(data_np, "cs-gpio", 0);
+
if (!gpio_is_valid(cs->line)) {
dev_err(&spi->dev, "chip select gpio is not specified or invalid\n");
kfree(cs);
@@ -1055,7 +1062,8 @@ static int s3c64xx_spi_setup(struct spi_device *spi)
return -ENODEV;
}
- if (!spi_get_ctldata(spi)) {
+ /* Request gpio only if cs line is asserted by gpio pins */
+ if (sdd->cs_gpio) {
err = gpio_request_one(cs->line, GPIOF_OUT_INIT_HIGH,
dev_name(&spi->dev));
if (err) {
@@ -1064,9 +1072,11 @@ static int s3c64xx_spi_setup(struct spi_device *spi)
cs->line, err);
goto err_gpio_req;
}
- spi_set_ctldata(spi, cs);
}
+ if (!spi_get_ctldata(spi))
+ spi_set_ctldata(spi, cs);
+
sci = sdd->cntrlr_info;
spin_lock_irqsave(&sdd->lock, flags);
@@ -1144,8 +1154,10 @@ err_gpio_req:
static void s3c64xx_spi_cleanup(struct spi_device *spi)
{
struct s3c64xx_spi_csinfo *cs = spi_get_ctldata(spi);
+ struct s3c64xx_spi_driver_data *sdd;
- if (cs) {
+ sdd = spi_master_get_devdata(spi->master);
+ if (cs && sdd->cs_gpio) {
gpio_free(cs->line);
if (spi->dev.of_node)
kfree(cs);
@@ -1322,7 +1334,11 @@ static int s3c64xx_spi_probe(struct platform_device *pdev)
sdd->cntrlr_info = sci;
sdd->pdev = pdev;
sdd->sfr_start = mem_res->start;
+ sdd->cs_gpio = false;
if (pdev->dev.of_node) {
+ if (of_find_property(pdev->dev.of_node, "cs-gpio", NULL))
+ sdd->cs_gpio = true;
+
ret = of_alias_get_id(pdev->dev.of_node, "spi");
if (ret < 0) {
dev_err(&pdev->dev, "failed to get alias id, errno %d\n",
--
1.7.5.4
next prev parent reply other threads:[~2013-04-22 7:09 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-04-22 7:09 [PATCH 0/3] Polling support for s3c64xx spi controller Girish K S
2013-04-22 7:09 ` [PATCH 1/3] spi: s3c64xx: added support for polling mode Girish K S
2013-04-23 15:15 ` Mark Brown
2013-04-24 9:37 ` Girish KS
2013-04-22 7:09 ` Girish K S [this message]
2013-04-23 14:42 ` [PATCH 2/3] spi: s3c64xx: Added provision for dedicated cs pin Mark Brown
2013-04-24 9:39 ` Girish KS
2013-04-22 7:09 ` [PATCH 3/3] spi: s3c64xx: Added support for exynos5440 spi Girish K S
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1366614565-3743-3-git-send-email-ks.giri@samsung.com \
--to=girishks2000@gmail.com \
--cc=broonie@opensource.wolfsonmicro.com \
--cc=grant.likely@secretlab.ca \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=spi-devel-general@lists.sourceforge.net \
--cc=t.figa@samsung.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®