From: Venu Byravarasu <vbyravarasu@nvidia.com>
To: <gregkh@linuxfoundation.org>, <swarren@wwwdotorg.org>,
<balbi@ti.com>, <stern@rowland.harvard.edu>
Cc: <linux-usb@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<linux-tegra@vger.kernel.org>,
Venu Byravarasu <vbyravarasu@nvidia.com>
Subject: [PATCH v3 04/10] Revert "usb: phy: tegra: don't call into tegra-ehci directly"
Date: Fri, 10 May 2013 19:24:05 +0530 [thread overview]
Message-ID: <1368194051-4925-5-git-send-email-vbyravarasu@nvidia.com> (raw)
In-Reply-To: <1368194051-4925-1-git-send-email-vbyravarasu@nvidia.com>
This reverts commit ee5d5499edb94cd03738a52a7e234b139da8fd72.
Signed-off-by: Venu Byravarasu <vbyravarasu@nvidia.com>
---
As PHY is being registered as separate driver, solution proposed with
this patch cannot work anymore.
Hence pushed patch 10 of this series to address the issue.
drivers/usb/host/ehci-tegra.c | 10 +++++-----
drivers/usb/phy/phy-tegra-usb.c | 13 ++++---------
include/linux/usb/tegra_usb_phy.h | 10 +++++-----
3 files changed, 14 insertions(+), 19 deletions(-)
diff --git a/drivers/usb/host/ehci-tegra.c b/drivers/usb/host/ehci-tegra.c
index e3eddc3..ed201ae 100644
--- a/drivers/usb/host/ehci-tegra.c
+++ b/drivers/usb/host/ehci-tegra.c
@@ -611,7 +611,7 @@ static const struct dev_pm_ops tegra_ehci_pm_ops = {
/* Bits of PORTSC1, which will get cleared by writing 1 into them */
#define TEGRA_PORTSC1_RWC_BITS (PORT_CSC | PORT_PEC | PORT_OCC)
-static void tegra_ehci_set_pts(struct usb_phy *x, u8 pts_val)
+void tegra_ehci_set_pts(struct usb_phy *x, u8 pts_val)
{
unsigned long val;
struct usb_hcd *hcd = bus_to_hcd(x->otg->host);
@@ -622,8 +622,9 @@ static void tegra_ehci_set_pts(struct usb_phy *x, u8 pts_val)
val |= TEGRA_USB_PORTSC1_PTS(pts_val & 3);
writel(val, base + TEGRA_USB_PORTSC1);
}
+EXPORT_SYMBOL_GPL(tegra_ehci_set_pts);
-static void tegra_ehci_set_phcd(struct usb_phy *x, bool enable)
+void tegra_ehci_set_phcd(struct usb_phy *x, bool enable)
{
unsigned long val;
struct usb_hcd *hcd = bus_to_hcd(x->otg->host);
@@ -636,6 +637,7 @@ static void tegra_ehci_set_phcd(struct usb_phy *x, bool enable)
val &= ~TEGRA_USB_PORTSC1_PHCD;
writel(val, base + TEGRA_USB_PORTSC1);
}
+EXPORT_SYMBOL_GPL(tegra_ehci_set_phcd);
static u64 tegra_ehci_dma_mask = DMA_BIT_MASK(32);
@@ -736,9 +738,7 @@ static int tegra_ehci_probe(struct platform_device *pdev)
tegra->phy = tegra_usb_phy_open(&pdev->dev, instance, hcd->regs,
pdata->phy_config,
- TEGRA_USB_PHY_MODE_HOST,
- tegra_ehci_set_pts,
- tegra_ehci_set_phcd);
+ TEGRA_USB_PHY_MODE_HOST);
if (IS_ERR(tegra->phy)) {
dev_err(&pdev->dev, "Failed to open USB phy\n");
err = -ENXIO;
diff --git a/drivers/usb/phy/phy-tegra-usb.c b/drivers/usb/phy/phy-tegra-usb.c
index 17d8112..5487d38 100644
--- a/drivers/usb/phy/phy-tegra-usb.c
+++ b/drivers/usb/phy/phy-tegra-usb.c
@@ -299,7 +299,7 @@ static void utmi_phy_clk_disable(struct tegra_usb_phy *phy)
val &= ~USB_SUSP_SET;
writel(val, base + USB_SUSP_CTRL);
} else
- phy->set_phcd(&phy->u_phy, true);
+ tegra_ehci_set_phcd(&phy->u_phy, true);
if (utmi_wait_register(base + USB_SUSP_CTRL, USB_PHY_CLK_VALID, 0) < 0)
pr_err("%s: timeout waiting for phy to stabilize\n", __func__);
@@ -321,7 +321,7 @@ static void utmi_phy_clk_enable(struct tegra_usb_phy *phy)
val &= ~USB_SUSP_CLR;
writel(val, base + USB_SUSP_CTRL);
} else
- phy->set_phcd(&phy->u_phy, false);
+ tegra_ehci_set_phcd(&phy->u_phy, false);
if (utmi_wait_register(base + USB_SUSP_CTRL, USB_PHY_CLK_VALID,
USB_PHY_CLK_VALID))
@@ -444,7 +444,7 @@ static int utmi_phy_power_on(struct tegra_usb_phy *phy)
utmi_phy_clk_enable(phy);
if (!phy->is_legacy_phy)
- phy->set_pts(&phy->u_phy, 0);
+ tegra_ehci_set_pts(&phy->u_phy, 0);
return 0;
}
@@ -688,10 +688,7 @@ static int tegra_usb_phy_suspend(struct usb_phy *x, int suspend)
}
struct tegra_usb_phy *tegra_usb_phy_open(struct device *dev, int instance,
- void __iomem *regs, void *config, enum tegra_usb_phy_mode phy_mode,
- void (*set_pts)(struct usb_phy *x, u8 pts_val),
- void (*set_phcd)(struct usb_phy *x, bool enable))
-
+ void __iomem *regs, void *config, enum tegra_usb_phy_mode phy_mode)
{
struct tegra_usb_phy *phy;
unsigned long parent_rate;
@@ -710,8 +707,6 @@ struct tegra_usb_phy *tegra_usb_phy_open(struct device *dev, int instance,
phy->dev = dev;
phy->is_legacy_phy =
of_property_read_bool(np, "nvidia,has-legacy-mode");
- phy->set_pts = set_pts;
- phy->set_phcd = set_phcd;
err = of_property_match_string(np, "phy_type", "ulpi");
if (err < 0)
phy->is_ulpi_phy = false;
diff --git a/include/linux/usb/tegra_usb_phy.h b/include/linux/usb/tegra_usb_phy.h
index 1b7519a..9ebebe9 100644
--- a/include/linux/usb/tegra_usb_phy.h
+++ b/include/linux/usb/tegra_usb_phy.h
@@ -61,14 +61,10 @@ struct tegra_usb_phy {
struct device *dev;
bool is_legacy_phy;
bool is_ulpi_phy;
- void (*set_pts)(struct usb_phy *x, u8 pts_val);
- void (*set_phcd)(struct usb_phy *x, bool enable);
};
struct tegra_usb_phy *tegra_usb_phy_open(struct device *dev, int instance,
- void __iomem *regs, void *config, enum tegra_usb_phy_mode phy_mode,
- void (*set_pts)(struct usb_phy *x, u8 pts_val),
- void (*set_phcd)(struct usb_phy *x, bool enable));
+ void __iomem *regs, void *config, enum tegra_usb_phy_mode phy_mode);
void tegra_usb_phy_preresume(struct usb_phy *phy);
@@ -79,4 +75,8 @@ void tegra_ehci_phy_restore_start(struct usb_phy *phy,
void tegra_ehci_phy_restore_end(struct usb_phy *phy);
+void tegra_ehci_set_pts(struct usb_phy *x, u8 pts_val);
+
+void tegra_ehci_set_phcd(struct usb_phy *x, bool enable);
+
#endif /* __TEGRA_USB_PHY_H */
--
1.7.0.4
next prev parent reply other threads:[~2013-05-10 14:03 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-05-10 13:54 [PATCH v3 00/10] Tegra USB PHY driver series Venu Byravarasu
2013-05-10 13:54 ` [PATCH v3 01/10] ARM: tegra: finalize USB EHCI and PHY bindings Venu Byravarasu
2013-05-13 17:17 ` Stephen Warren
2013-05-10 13:54 ` [PATCH v3 02/10] arm: dt: Tegra20: Modify ULPI reset GPIO properties Venu Byravarasu
2013-05-13 17:21 ` Stephen Warren
2013-05-10 13:54 ` [PATCH v3 03/10] ARM: tegra: update device trees for USB binding rework Venu Byravarasu
2013-05-13 17:29 ` Stephen Warren
2013-05-10 13:54 ` Venu Byravarasu [this message]
2013-05-10 14:26 ` [PATCH v3 04/10] Revert "usb: phy: tegra: don't call into tegra-ehci directly" Alan Stern
2013-05-10 13:54 ` [PATCH v3 05/10] usb: phy: tegra: Get PHY mode using DT Venu Byravarasu
2013-05-10 13:54 ` [PATCH v3 06/10] usb: phy: tegra: Return correct error value provided by clk_get_sys Venu Byravarasu
2013-05-10 13:54 ` [PATCH v3 07/10] usb: phy: tegra: get ULPI reset GPIO info using DT Venu Byravarasu
2013-05-10 13:54 ` [PATCH v3 08/10] usb: phy: tegra: Add error handling & clean up Venu Byravarasu
2013-05-10 18:06 ` Sergei Shtylyov
2013-05-10 13:54 ` [PATCH v3 09/10] usb: phy: registering Tegra USB PHY as platform driver Venu Byravarasu
2013-05-10 13:54 ` [PATCH v3 10/10] Usb: Move PORTSC access to PHY Venu Byravarasu
2013-05-10 20:04 ` Stephen Warren
[not found] <CAH7OJZtx4-45vzGmzh6B3eW9GOmDEi7794FqZaenDgmcMUXYFg@mail.gmail.com>
2013-05-10 18:05 ` [PATCH v3 04/10] Revert "usb: phy: tegra: don't call into tegra-ehci directly" Alan Stern
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1368194051-4925-5-git-send-email-vbyravarasu@nvidia.com \
--to=vbyravarasu@nvidia.com \
--cc=balbi@ti.com \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-tegra@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=stern@rowland.harvard.edu \
--cc=swarren@wwwdotorg.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®