From: Dylan Socolobsky <dsocolobsky@gmail.com>
To: marek.belisko@gmail.com, gregkh@linuxfoundation.org,
devendra.aaru@gmail.com
Cc: devel@driverdev.osuosl.org, linux-kernel@vger.kernel.org,
Dylan Socolobsky <dsocolobsky@gmail.com>
Subject: [PATCH 2/2] Staging: ft1000: Change C99 comments in ft1000_dnld.c
Date: Mon, 13 May 2013 19:47:33 -0300 [thread overview]
Message-ID: <1368485253-8985-1-git-send-email-dsocolobsky@gmail.com> (raw)
This simple patch fixes the ERRORs found by checkpatch.pl in the file
ft1000_dnld.c by switching to the standard Kernel comment style.
Signed-off-by: Dylan Socolobsky <dsocolobsky@gmail.com>
---
drivers/staging/ft1000/ft1000-pcmcia/ft1000_dnld.c | 22 +++++++++++-----------
1 file changed, 11 insertions(+), 11 deletions(-)
diff --git a/drivers/staging/ft1000/ft1000-pcmcia/ft1000_dnld.c b/drivers/staging/ft1000/ft1000-pcmcia/ft1000_dnld.c
index 18a8751..f892598 100644
--- a/drivers/staging/ft1000/ft1000-pcmcia/ft1000_dnld.c
+++ b/drivers/staging/ft1000/ft1000-pcmcia/ft1000_dnld.c
@@ -132,16 +132,16 @@ void card_bootload(struct net_device *dev)
pdata = (u32 *) bootimage;
size = sizeof(bootimage);
- // check for odd word
+ /* check for odd word */
if (size & 0x0003)
size += 4;
- // Provide mutual exclusive access while reading ASIC registers.
+ /* Provide mutual exclusive access while reading ASIC registers. */
spin_lock_irqsave(&info->dpram_lock, flags);
- // need to set i/o base address initially and hardware will autoincrement
+ /* need to set i/o base address initially and hardware will autoincrement */
ft1000_write_reg(dev, FT1000_REG_DPRAM_ADDR, FT1000_DPRAM_BASE);
- // write bytes
+ /* write bytes */
for (i = 0; i < (size >> 2); i++) {
templong = *pdata++;
outl(templong, dev->base_addr + FT1000_REG_MAG_DPDATA);
@@ -390,7 +390,7 @@ int card_download(struct net_device *dev, const u8 *pFileStart,
Status = FAILURE;
break;
}
- // Provide mutual exclusive access while reading ASIC registers.
+ /* Provide mutual exclusive access while reading ASIC registers. */
spin_lock_irqsave(&info->dpram_lock,
flags);
/*
@@ -504,7 +504,7 @@ int card_download(struct net_device *dev, const u8 *pFileStart,
break;
case REQUEST_MAILBOX_DATA:
- // Convert length from byte count to word count. Make sure we round up.
+ /* Convert length from byte count to word count. Make sure we round up. */
word_length =
(long)(info->DSPInfoBlklen + 1) / 2;
put_request_value(dev, word_length);
@@ -512,7 +512,7 @@ int card_download(struct net_device *dev, const u8 *pFileStart,
(struct drv_msg *) & info->DSPInfoBlk[0];
pUsData =
(u16 *) & pMailBoxData->data[0];
- // Provide mutual exclusive access while reading ASIC registers.
+ /* Provide mutual exclusive access while reading ASIC registers. */
spin_lock_irqsave(&info->dpram_lock,
flags);
if (file_version == 5) {
@@ -564,7 +564,7 @@ int card_download(struct net_device *dev, const u8 *pFileStart,
(u16 *) ((long)pFileStart +
pFileHdr5->
version_data_offset);
- // Provide mutual exclusive access while reading ASIC registers.
+ /* Provide mutual exclusive access while reading ASIC registers. */
spin_lock_irqsave(&info->dpram_lock,
flags);
/*
@@ -716,7 +716,7 @@ int card_download(struct net_device *dev, const u8 *pFileStart,
}
usHdrLength = ntohs(pHdr->length); /* Byte length for PROV records */
- // Get buffer for provisioning data
+ /* Get buffer for provisioning data */
pbuffer =
kmalloc((usHdrLength + sizeof(struct pseudo_hdr)),
GFP_ATOMIC);
@@ -724,7 +724,7 @@ int card_download(struct net_device *dev, const u8 *pFileStart,
memcpy(pbuffer, (void *)pUcFile,
(u32) (usHdrLength +
sizeof(struct pseudo_hdr)));
- // link provisioning data
+ /* link provisioning data */
pprov_record =
kmalloc(sizeof(struct prov_record),
GFP_ATOMIC);
@@ -734,7 +734,7 @@ int card_download(struct net_device *dev, const u8 *pFileStart,
list_add_tail(&pprov_record->
list,
&info->prov_list);
- // Move to next entry if available
+ /* Move to next entry if available */
pUcFile =
(u8 *) ((unsigned long) pUcFile +
(unsigned long) ((usHdrLength + 1) & 0xFFFFFFFE) + sizeof(struct pseudo_hdr));
--
1.8.1.4
reply other threads:[~2013-05-13 23:04 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1368485253-8985-1-git-send-email-dsocolobsky@gmail.com \
--to=dsocolobsky@gmail.com \
--cc=devel@driverdev.osuosl.org \
--cc=devendra.aaru@gmail.com \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=marek.belisko@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome