From: Lee Jones <lee.jones@linaro.org>
To: linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, balbi@ti.com,
linux-usb@vger.kernel.org, linux-crypto@vger.kernel.org,
davem@davemloft.net, herbert@gondor.hengli.com.au,
vinod.koul@intel.com
Cc: arnd@arndb.de, linus.walleij@stericsson.com,
srinidhi.kasagar@stericsson.com, Lee Jones <lee.jones@linaro.org>,
Dan Williams <djbw@fb.com>,
Per Forlin <per.forlin@stericsson.com>,
Rabin Vincent <rabin@rab.in>
Subject: [PATCH 31/39] dmaengine: ste_dma40: Replace ST-E's home-brew DMA direction defs with generic ones
Date: Wed, 15 May 2013 10:51:54 +0100 [thread overview]
Message-ID: <1368611522-9984-32-git-send-email-lee.jones@linaro.org> (raw)
In-Reply-To: <1368611522-9984-1-git-send-email-lee.jones@linaro.org>
STEDMA40_*_TO_* direction definitions are identical in all but name to
the pre-defined generic DMA_*_TO_* ones. Let's make things easy by not
duplicating such things.
Cc: Vinod Koul <vinod.koul@intel.com>
Cc: Dan Williams <djbw@fb.com>
Cc: Per Forlin <per.forlin@stericsson.com>
Cc: Rabin Vincent <rabin@rab.in>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
drivers/dma/ste_dma40.c | 56 ++++++++++++++++++++++----------------------
drivers/dma/ste_dma40_ll.c | 24 +++++++++----------
2 files changed, 40 insertions(+), 40 deletions(-)
diff --git a/drivers/dma/ste_dma40.c b/drivers/dma/ste_dma40.c
index 08bc58a..483da16 100644
--- a/drivers/dma/ste_dma40.c
+++ b/drivers/dma/ste_dma40.c
@@ -78,7 +78,7 @@ static int dma40_memcpy_channels[] = {
/* Default configuration for physcial memcpy */
struct stedma40_chan_cfg dma40_memcpy_conf_phy = {
.mode = STEDMA40_MODE_PHYSICAL,
- .dir = STEDMA40_MEM_TO_MEM,
+ .dir = DMA_MEM_TO_MEM,
.src_info.data_width = STEDMA40_BYTE_WIDTH,
.src_info.psize = STEDMA40_PSIZE_PHY_1,
@@ -92,7 +92,7 @@ struct stedma40_chan_cfg dma40_memcpy_conf_phy = {
/* Default configuration for logical memcpy */
struct stedma40_chan_cfg dma40_memcpy_conf_log = {
.mode = STEDMA40_MODE_LOGICAL,
- .dir = STEDMA40_MEM_TO_MEM,
+ .dir = DMA_MEM_TO_MEM,
.src_info.data_width = STEDMA40_BYTE_WIDTH,
.src_info.psize = STEDMA40_PSIZE_LOG_1,
@@ -843,7 +843,7 @@ static void d40_log_lli_to_lcxa(struct d40_chan *chan, struct d40_desc *desc)
* that uses linked lists.
*/
if (!(chan->phy_chan->use_soft_lli &&
- chan->dma_cfg.dir == STEDMA40_PERIPH_TO_MEM))
+ chan->dma_cfg.dir == DMA_DEV_TO_MEM))
curr_lcla = d40_lcla_alloc_one(chan, desc);
first_lcla = curr_lcla;
@@ -1311,12 +1311,12 @@ static void d40_config_set_event(struct d40_chan *d40c,
u32 event = D40_TYPE_TO_EVENT(d40c->dma_cfg.dev_type);
/* Enable event line connected to device (or memcpy) */
- if ((d40c->dma_cfg.dir == STEDMA40_PERIPH_TO_MEM) ||
- (d40c->dma_cfg.dir == STEDMA40_PERIPH_TO_PERIPH))
+ if ((d40c->dma_cfg.dir == DMA_DEV_TO_MEM) ||
+ (d40c->dma_cfg.dir == DMA_DEV_TO_DEV))
__d40_config_set_event(d40c, event_type, event,
D40_CHAN_REG_SSLNK);
- if (d40c->dma_cfg.dir != STEDMA40_PERIPH_TO_MEM)
+ if (d40c->dma_cfg.dir != DMA_DEV_TO_MEM)
__d40_config_set_event(d40c, event_type, event,
D40_CHAN_REG_SDLNK);
}
@@ -1774,7 +1774,7 @@ static int d40_validate_conf(struct d40_chan *d40c,
res = -EINVAL;
}
- if (conf->dir == STEDMA40_PERIPH_TO_PERIPH) {
+ if (conf->dir == DMA_DEV_TO_DEV) {
/*
* DMAC HW supports it. Will be added to this driver,
* in case any dma client requires it.
@@ -1905,11 +1905,11 @@ static int d40_allocate_channel(struct d40_chan *d40c, bool *first_phy_user)
phys = d40c->base->phy_res;
num_phy_chans = d40c->base->num_phy_chans;
- if (d40c->dma_cfg.dir == STEDMA40_PERIPH_TO_MEM) {
+ if (d40c->dma_cfg.dir == DMA_DEV_TO_MEM) {
log_num = 2 * dev_type;
is_src = true;
- } else if (d40c->dma_cfg.dir == STEDMA40_MEM_TO_PERIPH ||
- d40c->dma_cfg.dir == STEDMA40_MEM_TO_MEM) {
+ } else if (d40c->dma_cfg.dir == DMA_MEM_TO_DEV ||
+ d40c->dma_cfg.dir == DMA_MEM_TO_MEM) {
/* dst event lines are used for logical memcpy */
log_num = 2 * dev_type + 1;
is_src = false;
@@ -1920,7 +1920,7 @@ static int d40_allocate_channel(struct d40_chan *d40c, bool *first_phy_user)
event_line = D40_TYPE_TO_EVENT(dev_type);
if (!is_log) {
- if (d40c->dma_cfg.dir == STEDMA40_MEM_TO_MEM) {
+ if (d40c->dma_cfg.dir == DMA_MEM_TO_MEM) {
/* Find physical half channel */
if (d40c->dma_cfg.use_fixed_channel) {
i = d40c->dma_cfg.phy_channel;
@@ -2068,10 +2068,10 @@ static int d40_free_dma(struct d40_chan *d40c)
return -EINVAL;
}
- if (d40c->dma_cfg.dir == STEDMA40_MEM_TO_PERIPH ||
- d40c->dma_cfg.dir == STEDMA40_MEM_TO_MEM)
+ if (d40c->dma_cfg.dir == DMA_MEM_TO_DEV ||
+ d40c->dma_cfg.dir == DMA_MEM_TO_MEM)
is_src = false;
- else if (d40c->dma_cfg.dir == STEDMA40_PERIPH_TO_MEM)
+ else if (d40c->dma_cfg.dir == DMA_DEV_TO_MEM)
is_src = true;
else {
chan_err(d40c, "Unknown direction\n");
@@ -2133,10 +2133,10 @@ static bool d40_is_paused(struct d40_chan *d40c)
goto _exit;
}
- if (d40c->dma_cfg.dir == STEDMA40_MEM_TO_PERIPH ||
- d40c->dma_cfg.dir == STEDMA40_MEM_TO_MEM) {
+ if (d40c->dma_cfg.dir == DMA_MEM_TO_DEV ||
+ d40c->dma_cfg.dir == DMA_MEM_TO_MEM) {
status = readl(chanbase + D40_CHAN_REG_SDLNK);
- } else if (d40c->dma_cfg.dir == STEDMA40_PERIPH_TO_MEM) {
+ } else if (d40c->dma_cfg.dir == DMA_DEV_TO_MEM) {
status = readl(chanbase + D40_CHAN_REG_SSLNK);
} else {
chan_err(d40c, "Unknown direction\n");
@@ -2387,12 +2387,12 @@ static void d40_set_prio_realtime(struct d40_chan *d40c)
if (d40c->base->rev < 3)
return;
- if ((d40c->dma_cfg.dir == STEDMA40_PERIPH_TO_MEM) ||
- (d40c->dma_cfg.dir == STEDMA40_PERIPH_TO_PERIPH))
+ if ((d40c->dma_cfg.dir == DMA_DEV_TO_MEM) ||
+ (d40c->dma_cfg.dir == DMA_DEV_TO_DEV))
__d40_set_prio_rt(d40c, d40c->dma_cfg.dev_type, true);
- if ((d40c->dma_cfg.dir == STEDMA40_MEM_TO_PERIPH) ||
- (d40c->dma_cfg.dir == STEDMA40_PERIPH_TO_PERIPH))
+ if ((d40c->dma_cfg.dir == DMA_MEM_TO_DEV) ||
+ (d40c->dma_cfg.dir == DMA_DEV_TO_DEV))
__d40_set_prio_rt(d40c, d40c->dma_cfg.dev_type, false);
}
@@ -2423,11 +2423,11 @@ static struct dma_chan *d40_xlate(struct of_phandle_args *dma_spec,
switch (D40_DT_FLAGS_DIR(flags)) {
case 0:
- cfg.dir = STEDMA40_MEM_TO_PERIPH;
+ cfg.dir = DMA_MEM_TO_DEV;
cfg.dst_info.big_endian = D40_DT_FLAGS_BIG_ENDIAN(flags);
break;
case 1:
- cfg.dir = STEDMA40_PERIPH_TO_MEM;
+ cfg.dir = DMA_DEV_TO_MEM;
cfg.src_info.big_endian = D40_DT_FLAGS_BIG_ENDIAN(flags);
break;
}
@@ -2473,7 +2473,7 @@ static int d40_alloc_chan_resources(struct dma_chan *chan)
d40_set_prio_realtime(d40c);
if (chan_is_logical(d40c)) {
- if (d40c->dma_cfg.dir == STEDMA40_PERIPH_TO_MEM)
+ if (d40c->dma_cfg.dir == DMA_DEV_TO_MEM)
d40c->lcpa = d40c->base->lcpa_base +
d40c->dma_cfg.dev_type * D40_LCPA_CHAN_SIZE;
else
@@ -2746,12 +2746,12 @@ static int d40_set_runtime_config(struct dma_chan *chan,
if (config->direction == DMA_DEV_TO_MEM) {
config_addr = config->src_addr;
- if (cfg->dir != STEDMA40_PERIPH_TO_MEM)
+ if (cfg->dir != DMA_DEV_TO_MEM)
dev_dbg(d40c->base->dev,
"channel was not configured for peripheral "
"to memory transfer (%d) overriding\n",
cfg->dir);
- cfg->dir = STEDMA40_PERIPH_TO_MEM;
+ cfg->dir = DMA_DEV_TO_MEM;
/* Configure the memory side */
if (dst_addr_width == DMA_SLAVE_BUSWIDTH_UNDEFINED)
@@ -2762,12 +2762,12 @@ static int d40_set_runtime_config(struct dma_chan *chan,
} else if (config->direction == DMA_MEM_TO_DEV) {
config_addr = config->dst_addr;
- if (cfg->dir != STEDMA40_MEM_TO_PERIPH)
+ if (cfg->dir != DMA_MEM_TO_DEV)
dev_dbg(d40c->base->dev,
"channel was not configured for memory "
"to peripheral transfer (%d) overriding\n",
cfg->dir);
- cfg->dir = STEDMA40_MEM_TO_PERIPH;
+ cfg->dir = DMA_MEM_TO_DEV;
/* Configure the memory side */
if (src_addr_width == DMA_SLAVE_BUSWIDTH_UNDEFINED)
diff --git a/drivers/dma/ste_dma40_ll.c b/drivers/dma/ste_dma40_ll.c
index ab5a2a7..121c0ce 100644
--- a/drivers/dma/ste_dma40_ll.c
+++ b/drivers/dma/ste_dma40_ll.c
@@ -18,23 +18,23 @@ void d40_log_cfg(struct stedma40_chan_cfg *cfg,
u32 l1 = 0; /* src */
/* src is mem? -> increase address pos */
- if (cfg->dir == STEDMA40_MEM_TO_PERIPH ||
- cfg->dir == STEDMA40_MEM_TO_MEM)
+ if (cfg->dir == DMA_MEM_TO_DEV ||
+ cfg->dir == DMA_MEM_TO_MEM)
l1 |= 1 << D40_MEM_LCSP1_SCFG_INCR_POS;
/* dst is mem? -> increase address pos */
- if (cfg->dir == STEDMA40_PERIPH_TO_MEM ||
- cfg->dir == STEDMA40_MEM_TO_MEM)
+ if (cfg->dir == DMA_DEV_TO_MEM ||
+ cfg->dir == DMA_MEM_TO_MEM)
l3 |= 1 << D40_MEM_LCSP3_DCFG_INCR_POS;
/* src is hw? -> master port 1 */
- if (cfg->dir == STEDMA40_PERIPH_TO_MEM ||
- cfg->dir == STEDMA40_PERIPH_TO_PERIPH)
+ if (cfg->dir == DMA_DEV_TO_MEM ||
+ cfg->dir == DMA_DEV_TO_DEV)
l1 |= 1 << D40_MEM_LCSP1_SCFG_MST_POS;
/* dst is hw? -> master port 1 */
- if (cfg->dir == STEDMA40_MEM_TO_PERIPH ||
- cfg->dir == STEDMA40_PERIPH_TO_PERIPH)
+ if (cfg->dir == DMA_MEM_TO_DEV ||
+ cfg->dir == DMA_DEV_TO_DEV)
l3 |= 1 << D40_MEM_LCSP3_DCFG_MST_POS;
l3 |= 1 << D40_MEM_LCSP3_DCFG_EIM_POS;
@@ -55,8 +55,8 @@ void d40_phy_cfg(struct stedma40_chan_cfg *cfg, u32 *src_cfg, u32 *dst_cfg)
u32 src = 0;
u32 dst = 0;
- if ((cfg->dir == STEDMA40_PERIPH_TO_MEM) ||
- (cfg->dir == STEDMA40_PERIPH_TO_PERIPH)) {
+ if ((cfg->dir == DMA_DEV_TO_MEM) ||
+ (cfg->dir == DMA_DEV_TO_DEV)) {
/* Set master port to 1 */
src |= 1 << D40_SREG_CFG_MST_POS;
src |= D40_TYPE_TO_EVENT(cfg->dev_type);
@@ -66,8 +66,8 @@ void d40_phy_cfg(struct stedma40_chan_cfg *cfg, u32 *src_cfg, u32 *dst_cfg)
else
src |= 3 << D40_SREG_CFG_PHY_TM_POS;
}
- if ((cfg->dir == STEDMA40_MEM_TO_PERIPH) ||
- (cfg->dir == STEDMA40_PERIPH_TO_PERIPH)) {
+ if ((cfg->dir == DMA_MEM_TO_DEV) ||
+ (cfg->dir == DMA_DEV_TO_DEV)) {
/* Set master port to 1 */
dst |= 1 << D40_SREG_CFG_MST_POS;
dst |= D40_TYPE_TO_EVENT(cfg->dev_type);
--
1.7.10.4
next prev parent reply other threads:[~2013-05-15 9:55 UTC|newest]
Thread overview: 126+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-05-15 9:51 [PATCH 00/39] Continuation of DMA changes in ux500 based drivers Lee Jones
2013-05-15 9:51 ` [PATCH 01/39] dmaengine: ste_dma40: Separate Logical Global Interrupt Mask (GIM) unmasking Lee Jones
2013-05-15 16:29 ` Linus Walleij
2013-05-16 6:35 ` Vinod Koul
2013-05-16 7:26 ` Lee Jones
2013-05-15 9:51 ` [PATCH 02/39] dmaengine: ste_dma40: Remove unnecessary call to d40_phy_cfg() Lee Jones
2013-05-15 16:33 ` Linus Walleij
2013-05-16 6:35 ` Vinod Koul
2013-05-16 7:25 ` Lee Jones
2013-05-16 9:40 ` Vinod Koul
2013-05-16 10:59 ` Lee Jones
2013-05-20 12:01 ` Linus Walleij
2013-05-15 9:51 ` [PATCH 03/39] dmaengine: ste_dma40: Don't configure runtime configurable setup during allocate Lee Jones
2013-05-15 16:44 ` Linus Walleij
2013-05-16 6:36 ` Vinod Koul
2013-05-15 9:51 ` [PATCH 04/39] ARM: ux500: Stop passing UART's platform data for Device Tree boots Lee Jones
2013-05-15 16:48 ` Linus Walleij
2013-05-15 9:51 ` [PATCH 05/39] ARM: ux500: Stop passing MMC's " Lee Jones
2013-05-15 16:50 ` Linus Walleij
2013-06-10 9:15 ` Lee Jones
2013-06-11 9:31 ` Linus Walleij
2013-05-15 9:51 ` [PATCH 06/39] ARM: ux500: Move SDI (MMC) and UART devices under more descriptive heading Lee Jones
2013-05-15 16:51 ` Linus Walleij
2013-06-10 9:17 ` Lee Jones
2013-06-11 9:40 ` Linus Walleij
2013-05-15 9:51 ` [PATCH 07/39] dmaengine: ste_dma40: Only use addresses passed as configuration information Lee Jones
2013-05-15 16:54 ` Linus Walleij
2013-05-16 6:40 ` Vinod Koul
2013-05-15 9:51 ` [PATCH 08/39] dmaengine: ste_dma40: Remove redundant address fetching function Lee Jones
2013-05-15 16:56 ` Linus Walleij
2013-05-16 6:41 ` Vinod Koul
2013-05-15 9:51 ` [PATCH 09/39] ARM: ux500: Remove DMA address look-up table Lee Jones
2013-05-15 17:03 ` Linus Walleij
2013-05-15 9:51 ` [PATCH 10/39] dmaengine: ste_dma40: Correct copy/paste error Lee Jones
2013-05-15 17:04 ` Linus Walleij
2013-05-16 6:42 ` Vinod Koul
2013-05-15 9:51 ` [PATCH 11/39] ARM: ux500: Remove unnecessary attributes from DMA channel request pdata Lee Jones
2013-05-15 17:05 ` Linus Walleij
2013-05-15 9:51 ` [PATCH 12/39] crypto: ux500/hash - Prepare clock before enabling it Lee Jones
2013-05-15 17:07 ` Linus Walleij
2013-05-16 6:53 ` Lee Jones
2013-05-16 7:00 ` Herbert Xu
2013-05-20 12:05 ` Linus Walleij
2013-05-15 9:51 ` [PATCH 13/39] crypto: ux500/hash - Set DMA configuration though dma_slave_config() Lee Jones
2013-05-15 17:09 ` Linus Walleij
2013-05-16 7:01 ` Herbert Xu
2013-05-20 12:06 ` Linus Walleij
2013-05-15 9:51 ` [PATCH 14/39] ARM: ux500: Stop passing Hash DMA channel config information though pdata Lee Jones
2013-05-20 12:09 ` Linus Walleij
2013-05-15 9:51 ` [PATCH 15/39] crypto: ux500/cryp - Prepare clock before enabling it Lee Jones
2013-05-15 17:11 ` Linus Walleij
2013-05-16 7:01 ` Herbert Xu
2013-05-20 12:10 ` Linus Walleij
2013-05-15 9:51 ` [PATCH 16/39] crypto: ux500/cryp - Set DMA configuration though dma_slave_config() Lee Jones
2013-05-16 7:01 ` Herbert Xu
2013-05-20 12:12 ` Linus Walleij
2013-05-15 9:51 ` [PATCH 17/39] ARM: ux500: Stop passing Cryp DMA channel config information though pdata Lee Jones
2013-05-15 9:51 ` [PATCH 18/39] crypto: ux500/[cryp|hash] - Show successful start-up in the bootlog Lee Jones
2013-05-16 7:02 ` Herbert Xu
2013-05-20 12:15 ` Linus Walleij
2013-05-15 9:51 ` [PATCH 19/39] ARM: ux500: Register Cyrp and Hash platform drivers on Snowball Lee Jones
2013-05-20 12:17 ` Linus Walleij
2013-05-15 9:51 ` [PATCH 20/39] usb: musb: ux500: move channel number knowledge into the driver Lee Jones
2013-05-15 17:18 ` Linus Walleij
2013-05-15 20:14 ` Fabio Baltieri
2013-05-17 6:35 ` Linus Walleij
2013-05-28 16:27 ` Felipe Balbi
2013-05-28 16:48 ` Lee Jones
2013-05-29 11:57 ` Linus Walleij
2013-05-20 12:19 ` Linus Walleij
2013-05-29 17:57 ` Felipe Balbi
2013-05-30 7:48 ` Linus Walleij
2013-05-30 8:12 ` Lee Jones
2013-05-30 19:06 ` Felipe Balbi
2013-05-30 7:44 ` Linus Walleij
2013-05-15 9:51 ` [PATCH 21/39] usb: musb: ux500: move the MUSB HDRC configuration " Lee Jones
2013-05-30 8:30 ` Linus Walleij
2013-05-15 9:51 ` [PATCH 22/39] usb: musb: ux500: take the dma_mask from coherent_dma_mask Lee Jones
2013-05-30 8:32 ` Linus Walleij
2013-05-15 9:51 ` [PATCH 23/39] usb: musb: ux500: harden checks for platform data Lee Jones
2013-05-30 8:34 ` Linus Walleij
2013-05-15 9:51 ` [PATCH 24/39] usb: musb: ux500: attempt to find channels by name before using pdata Lee Jones
2013-05-30 8:35 ` Linus Walleij
2013-05-15 9:51 ` [PATCH 25/39] usb: musb: ux500: add device tree probing support Lee Jones
2013-05-30 8:38 ` Linus Walleij
2013-05-15 9:51 ` [PATCH 26/39] ARM: ux500: Add an auxdata entry for MUSB for clock-name look-up Lee Jones
2013-05-30 8:42 ` Linus Walleij
2013-05-15 9:51 ` [PATCH 27/39] ARM: ux500: Remove ux500-musb platform registation when booting with DT Lee Jones
2013-05-30 8:44 ` Linus Walleij
2013-05-15 9:51 ` [PATCH 28/39] ARM: ux500: Remove empty function u8500_of_init_devices() Lee Jones
2013-05-30 8:45 ` Linus Walleij
2013-05-15 9:51 ` [PATCH 29/39] dmaengine: ste_dma40: Use the BIT macro to replace ugly '(1 << x)'s Lee Jones
2013-05-30 8:47 ` Linus Walleij
2013-05-15 9:51 ` [PATCH 30/39] ARM: ux500: Replace ST-E's home-brew DMA direction definition with the generic one Lee Jones
2013-05-30 8:52 ` Linus Walleij
2013-05-15 9:51 ` Lee Jones [this message]
2013-05-16 5:17 ` [PATCH 31/39] dmaengine: ste_dma40: Replace ST-E's home-brew DMA direction defs with generic ones Vinod Koul
2013-05-16 7:06 ` Lee Jones
2013-05-16 6:43 ` Vinod Koul
2013-05-30 8:54 ` Linus Walleij
2013-05-15 9:51 ` [PATCH 32/39] ARM: ux500: Remove recently unused stedma40_xfer_dir enums Lee Jones
2013-05-30 8:56 ` Linus Walleij
2013-05-15 9:51 ` [PATCH 33/39] dmaengine: ste_dma40_ll: Use the BIT macro to replace ugly '(1 << x)'s Lee Jones
2013-05-16 5:13 ` Vinod Koul
2013-05-30 8:58 ` Linus Walleij
2013-05-15 9:51 ` [PATCH 34/39] dmaengine: ste_dma40: Convert data_width from register bit format to value Lee Jones
2013-05-16 6:32 ` Vinod Koul
2013-05-16 7:35 ` Lee Jones
2013-05-16 9:41 ` Vinod Koul
2013-05-30 9:01 ` Linus Walleij
2013-05-15 9:51 ` [PATCH 35/39] dmaengine: ste_dma40_ll: Replace meaningless register set with comment Lee Jones
2013-05-16 5:18 ` Vinod Koul
2013-05-16 6:58 ` Lee Jones
2013-05-30 9:04 ` Linus Walleij
2013-05-30 17:56 ` Vinod Koul
2013-05-15 9:51 ` [PATCH 36/39] dmaengine: ste_dma40: Allow memcpy channels to be configured from DT Lee Jones
2013-05-16 5:05 ` Vinod Koul
2013-05-30 9:06 ` Linus Walleij
2013-05-15 9:52 ` [PATCH 37/39] ARM: ux500: Stop passing DMA platform data though AUXDATA Lee Jones
2013-05-30 9:12 ` Linus Walleij
2013-05-15 9:52 ` [PATCH 38/39] dmaengine: ste_dma40: Fetch the number of physical channels from DT Lee Jones
2013-05-16 6:34 ` Vinod Koul
2013-05-30 9:15 ` Linus Walleij
2013-05-15 9:52 ` [PATCH 39/39] dmaengine: ste_dma40: Fetch disabled " Lee Jones
2013-05-16 6:08 ` Vinod Koul
2013-05-30 9:16 ` Linus Walleij
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1368611522-9984-32-git-send-email-lee.jones@linaro.org \
--to=lee.jones@linaro.org \
--cc=arnd@arndb.de \
--cc=balbi@ti.com \
--cc=davem@davemloft.net \
--cc=djbw@fb.com \
--cc=herbert@gondor.hengli.com.au \
--cc=linus.walleij@stericsson.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-crypto@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=per.forlin@stericsson.com \
--cc=rabin@rab.in \
--cc=srinidhi.kasagar@stericsson.com \
--cc=vinod.koul@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®