From: Venu Byravarasu <vbyravarasu@nvidia.com>
To: <gregkh@linuxfoundation.org>, <stern@rowland.harvard.edu>,
<balbi@ti.com>, <swarren@wwwdotorg.org>
Cc: <linux-usb@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<linux-tegra@vger.kernel.org>,
Venu Byravarasu <vbyravarasu@nvidia.com>
Subject: [PATCH v4 6/8] usb: phy: tegra: get ULPI reset GPIO info using DT.
Date: Thu, 16 May 2013 19:43:00 +0530 [thread overview]
Message-ID: <1368713582-29038-7-git-send-email-vbyravarasu@nvidia.com> (raw)
In-Reply-To: <1368713582-29038-1-git-send-email-vbyravarasu@nvidia.com>
As GPIO information is avail through DT, used it to get Tegra ULPI
reset GPIO number. Added a new member to tegra_usb_phy structure to
store this number.
Signed-off-by: Venu Byravarasu <vbyravarasu@nvidia.com>
---
delta from v1, v2 & v3: no change.
drivers/usb/phy/phy-tegra-usb.c | 25 +++++++++++--------------
include/linux/usb/tegra_usb_phy.h | 1 +
2 files changed, 12 insertions(+), 14 deletions(-)
diff --git a/drivers/usb/phy/phy-tegra-usb.c b/drivers/usb/phy/phy-tegra-usb.c
index 0ff1f3e..b8c688a 100644
--- a/drivers/usb/phy/phy-tegra-usb.c
+++ b/drivers/usb/phy/phy-tegra-usb.c
@@ -541,11 +541,10 @@ static int ulpi_phy_power_on(struct tegra_usb_phy *phy)
int ret;
unsigned long val;
void __iomem *base = phy->regs;
- struct tegra_ulpi_config *config = phy->config;
- gpio_direction_output(config->reset_gpio, 0);
+ gpio_direction_output(phy->reset_gpio, 0);
msleep(5);
- gpio_direction_output(config->reset_gpio, 1);
+ gpio_direction_output(phy->reset_gpio, 1);
clk_prepare_enable(phy->clk);
msleep(1);
@@ -603,10 +602,8 @@ static int ulpi_phy_power_on(struct tegra_usb_phy *phy)
static int ulpi_phy_power_off(struct tegra_usb_phy *phy)
{
- struct tegra_ulpi_config *config = phy->config;
-
clk_disable(phy->clk);
- return gpio_direction_output(config->reset_gpio, 0);
+ return gpio_direction_output(phy->reset_gpio, 0);
}
static int tegra_phy_init(struct usb_phy *x)
@@ -622,18 +619,18 @@ static int tegra_phy_init(struct usb_phy *x)
pr_err("%s: can't get ulpi clock\n", __func__);
return PTR_ERR(phy->clk);
}
- if (!gpio_is_valid(ulpi_config->reset_gpio))
- ulpi_config->reset_gpio =
- of_get_named_gpio(phy->dev->of_node,
- "nvidia,phy-reset-gpio", 0);
- if (!gpio_is_valid(ulpi_config->reset_gpio)) {
+
+ phy->reset_gpio =
+ of_get_named_gpio(phy->dev->of_node,
+ "nvidia,phy-reset-gpio", 0);
+ if (!gpio_is_valid(phy->reset_gpio)) {
pr_err("%s: invalid reset gpio: %d\n", __func__,
- ulpi_config->reset_gpio);
+ phy->reset_gpio);
err = -EINVAL;
goto err1;
}
- gpio_request(ulpi_config->reset_gpio, "ulpi_phy_reset_b");
- gpio_direction_output(ulpi_config->reset_gpio, 0);
+ gpio_request(phy->reset_gpio, "ulpi_phy_reset_b");
+ gpio_direction_output(phy->reset_gpio, 0);
phy->ulpi = otg_ulpi_create(&ulpi_viewport_access_ops, 0);
phy->ulpi->io_priv = phy->regs + ULPI_VIEWPORT;
} else {
diff --git a/include/linux/usb/tegra_usb_phy.h b/include/linux/usb/tegra_usb_phy.h
index ff2d959..97d123c 100644
--- a/include/linux/usb/tegra_usb_phy.h
+++ b/include/linux/usb/tegra_usb_phy.h
@@ -62,6 +62,7 @@ struct tegra_usb_phy {
struct device *dev;
bool is_legacy_phy;
bool is_ulpi_phy;
+ int reset_gpio;
void (*set_pts)(struct usb_phy *x, u8 pts_val);
void (*set_phcd)(struct usb_phy *x, bool enable);
};
--
1.7.0.4
next prev parent reply other threads:[~2013-05-16 14:23 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-05-16 14:12 [PATCH v4 0/8] Tegra USB PHY driver series Venu Byravarasu
2013-05-16 14:12 ` [PATCH v4 1/8] ARM: tegra: finalize USB EHCI and PHY bindings Venu Byravarasu
2013-05-16 14:12 ` [PATCH v4 2/8] arm: dt: Tegra20: Modify ULPI reset GPIO properties Venu Byravarasu
2013-05-16 14:12 ` [PATCH v4 3/8] ARM: tegra: update device trees for USB binding rework Venu Byravarasu
2013-05-16 23:02 ` Stephen Warren
2013-05-17 22:06 ` Stephen Warren
2013-05-16 14:12 ` [PATCH v4 4/8] usb: phy: tegra: Return correct error value provided by clk_get_sys Venu Byravarasu
2013-05-16 14:12 ` [PATCH v4 5/8] usb: phy: tegra: Get PHY mode using DT Venu Byravarasu
2013-05-16 14:13 ` Venu Byravarasu [this message]
2013-05-16 14:13 ` [PATCH v4 7/8] usb: phy: tegra: Add error handling & clean up Venu Byravarasu
2013-05-16 21:08 ` Stephen Warren
2013-05-16 14:13 ` [PATCH v4 8/8] usb: phy: registering Tegra USB PHY as platform driver Venu Byravarasu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1368713582-29038-7-git-send-email-vbyravarasu@nvidia.com \
--to=vbyravarasu@nvidia.com \
--cc=balbi@ti.com \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-tegra@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=stern@rowland.harvard.edu \
--cc=swarren@wwwdotorg.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®