From: Dongjin Kim <tobetter@gmail.com>
To: unlisted-recipients:; (no To-header on input)
Cc: Dongjin Kim <tobetter@gmail.com>,
Tomasz Figa <t.figa@samsung.com>,
Kyungmin Park <kyungmin.park@samsung.com>,
Felipe Balbi <balbi@ti.com>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH] usb: phy: samsung: Add support HSIC on Exynos4X12
Date: Wed, 22 May 2013 02:01:46 +0900 [thread overview]
Message-ID: <1369155706-14299-1-git-send-email-tobetter@gmail.com> (raw)
This patch adds to enable High Speed Inter Chip on Exynos4X12. Both channels
are controlled by usbphy driver based on the patch series of usbphy driver
submitted by Tomasz Figa.
[1] https://patchwork.kernel.org/patch/2576121
[2] https://patchwork.kernel.org/patch/2576131
[3] https://patchwork.kernel.org/patch/2576141
[4] https://patchwork.kernel.org/patch/2576151
[5] https://patchwork.kernel.org/patch/2576161
[6] https://patchwork.kernel.org/patch/2576171
Signed-off-by: Dongjin Kim <tobetter@gmail.com>
Cc: Tomasz Figa <t.figa@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
---
drivers/usb/phy/phy-samsung-usb.c | 5 +++++
drivers/usb/phy/phy-samsung-usb.h | 10 ++++++++++
drivers/usb/phy/phy-samsung-usb2.c | 13 +++++++++++--
3 files changed, 26 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/phy/phy-samsung-usb.c b/drivers/usb/phy/phy-samsung-usb.c
index 7a1ed90..ac025ca 100644
--- a/drivers/usb/phy/phy-samsung-usb.c
+++ b/drivers/usb/phy/phy-samsung-usb.c
@@ -100,6 +100,11 @@ void samsung_usbphy_set_isolation_4210(struct samsung_usbphy *sphy, bool on)
reg_val |= en_mask;
writel(reg_val, reg);
+
+ if (sphy->drv_data->cpu_type == TYPE_EXYNOS4X12) {
+ writel(reg_val, sphy->pmuregs + EXYNOS4X12_PHY_HSIC_CTRL0);
+ writel(reg_val, sphy->pmuregs + EXYNOS4X12_PHY_HSIC_CTRL1);
+ }
}
EXPORT_SYMBOL_GPL(samsung_usbphy_set_isolation_4210);
diff --git a/drivers/usb/phy/phy-samsung-usb.h b/drivers/usb/phy/phy-samsung-usb.h
index 585d12f..68771bf 100644
--- a/drivers/usb/phy/phy-samsung-usb.h
+++ b/drivers/usb/phy/phy-samsung-usb.h
@@ -47,6 +47,16 @@
#define RSTCON_HLINK_SWRST (0x1 << 1)
#define RSTCON_SWRST (0x1 << 0)
+/* EXYNOS4X12 */
+#define EXYNOS4X12_PHY_HSIC_CTRL0 (0x04)
+#define EXYNOS4X12_PHY_HSIC_CTRL1 (0x08)
+
+#define PHYPWR_NORMAL_MASK_HSIC1 (0x7 << 12)
+#define PHYPWR_NORMAL_MASK_HSIC0 (0x7 << 9)
+#define PHYPWR_NORMAL_MASK_PHY1 (0x7 << 6)
+
+#define RSTCON_HOSTPHY_SWRST (0xf << 3)
+
/* EXYNOS5 */
#define EXYNOS5_PHY_HOST_CTRL0 (0x00)
diff --git a/drivers/usb/phy/phy-samsung-usb2.c b/drivers/usb/phy/phy-samsung-usb2.c
index 03180c0..1011c16 100644
--- a/drivers/usb/phy/phy-samsung-usb2.c
+++ b/drivers/usb/phy/phy-samsung-usb2.c
@@ -176,8 +176,12 @@ static void samsung_usb2phy_enable(struct samsung_usbphy *sphy)
phypwr &= ~PHYPWR_NORMAL_MASK;
rstcon |= RSTCON_SWRST;
break;
- case TYPE_EXYNOS4210:
case TYPE_EXYNOS4X12:
+ phypwr &= ~(PHYPWR_NORMAL_MASK_HSIC0 |
+ PHYPWR_NORMAL_MASK_HSIC1 |
+ PHYPWR_NORMAL_MASK_PHY1);
+ rstcon |= RSTCON_HOSTPHY_SWRST;
+ case TYPE_EXYNOS4210:
phypwr &= ~PHYPWR_NORMAL_MASK_PHY0;
rstcon |= RSTCON_SWRST;
default:
@@ -190,6 +194,8 @@ static void samsung_usb2phy_enable(struct samsung_usbphy *sphy)
/* reset all ports of PHY and Link */
writel(rstcon, regs + SAMSUNG_RSTCON);
udelay(10);
+ if (sphy->drv_data->cpu_type == TYPE_EXYNOS4X12)
+ rstcon &= ~RSTCON_HOSTPHY_SWRST;
rstcon &= ~RSTCON_SWRST;
writel(rstcon, regs + SAMSUNG_RSTCON);
}
@@ -240,8 +246,11 @@ static void samsung_usb2phy_disable(struct samsung_usbphy *sphy)
case TYPE_S3C64XX:
phypwr |= PHYPWR_NORMAL_MASK;
break;
- case TYPE_EXYNOS4210:
case TYPE_EXYNOS4X12:
+ phypwr |= (PHYPWR_NORMAL_MASK_HSIC0 |
+ PHYPWR_NORMAL_MASK_HSIC1 |
+ PHYPWR_NORMAL_MASK_PHY1);
+ case TYPE_EXYNOS4210:
phypwr |= PHYPWR_NORMAL_MASK_PHY0;
default:
break;
--
1.7.9.5
reply other threads:[~2013-05-21 17:02 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1369155706-14299-1-git-send-email-tobetter@gmail.com \
--to=tobetter@gmail.com \
--cc=balbi@ti.com \
--cc=gregkh@linuxfoundation.org \
--cc=kyungmin.park@samsung.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=t.figa@samsung.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®