mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Yinghai Lu <yinghai@kernel.org>
To: Bjorn Helgaas <bhelgaas@google.com>,
	Benjamin Herrenschmidt <benh@kernel.crashing.org>,
	Gavin Shan <shangw@linux.vnet.ibm.com>
Cc: linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org,
	Yinghai Lu <yinghai@kernel.org>
Subject: [PATCH v4 1/8] PCI: Don't use temp bus for pci_bus_release_bridge_resources
Date: Tue, 21 May 2013 23:38:41 -0700	[thread overview]
Message-ID: <1369204728-11165-2-git-send-email-yinghai@kernel.org> (raw)
In-Reply-To: <1369204728-11165-1-git-send-email-yinghai@kernel.org>

as later bus can not be used as temp variable after we change to
per root bus handling with assign unassigned resources.

Per Bjorn, separated out different patch.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>

---
 drivers/pci/setup-bus.c |    7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

Index: linux-2.6/drivers/pci/setup-bus.c
===================================================================
--- linux-2.6.orig/drivers/pci/setup-bus.c
+++ linux-2.6/drivers/pci/setup-bus.c
@@ -1458,12 +1458,11 @@ again:
 	 * Try to release leaf bridge's resources that doesn't fit resource of
 	 * child device under that bridge
 	 */
-	list_for_each_entry(fail_res, &fail_head, list) {
-		bus = fail_res->dev->bus;
-		pci_bus_release_bridge_resources(bus,
+	list_for_each_entry(fail_res, &fail_head, list)
+		pci_bus_release_bridge_resources(fail_res->dev->bus,
 						 fail_res->flags & type_mask,
 						 rel_type);
-	}
+
 	/* restore size and flags */
 	list_for_each_entry(fail_res, &fail_head, list) {
 		struct resource *res = fail_res->res;

  reply	other threads:[~2013-05-22  6:39 UTC|newest]

Thread overview: 38+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <1367837311.15842.31.camel@pasglop>
2013-05-06 23:15 ` [PATCH 1/2] PCI: Split pci_assign_unassigned_resources to per root bus Yinghai Lu
2013-05-06 23:15   ` [PATCH 2/2] PCI: Skip IORESOURCE_IO size and allocation for root bus without ioport range Yinghai Lu
2013-05-07  0:50   ` [PATCH 1/2] PCI: Split pci_assign_unassigned_resources to per root bus Benjamin Herrenschmidt
     [not found]     ` <51885a04.c181440a.37c9.ffffa88eSMTPIN_ADDED_BROKEN@mx.google.com>
2013-05-07  7:34       ` Yinghai Lu
2013-05-21 20:41   ` Bjorn Helgaas
2013-05-07 22:17 ` [PATCH v3 0/5] PCI: Skip resource allocation for root bus without conresponding type resource Yinghai Lu
2013-05-07 22:17   ` [PATCH v3 1/5] PCI: Split pci_assign_unassigned_resources to per root bus Yinghai Lu
2013-05-07 22:17   ` [PATCH v3 2/5] PCI: Skip IORESOURCE_IO allocation for root bus without ioport range Yinghai Lu
2013-05-07 22:17   ` [PATCH v3 3/5] PCI: Skip IORESOURCE_MMIO allocation for root bus without MMIO range Yinghai Lu
2013-05-07 22:28     ` Benjamin Herrenschmidt
2013-05-07 22:44       ` Yinghai Lu
2013-05-08  1:16         ` Benjamin Herrenschmidt
2013-05-08  3:57           ` Yinghai Lu
2013-05-07 22:17   ` [PATCH v3 4/5] PCI: Enable pci bridge when it is needed Yinghai Lu
2013-05-07 22:17   ` [PATCH v3 5/5] PCI: Retry assign unassigned resources for hotadd root bus Yinghai Lu
2013-05-22  6:38 ` [PATCH v4 0/8] PCI: Skip resource allocation for root bus without conresponding type resource Yinghai Lu
2013-05-22  6:38   ` Yinghai Lu [this message]
2013-05-22  6:38   ` [PATCH v4 2/8] PCI: Use pci_walk_bus to detect unassigned resources Yinghai Lu
2013-05-22  6:38   ` [PATCH v4 3/8] PCI: Introduce enable_local to prepare per root bus handling Yinghai Lu
2013-05-22  6:38   ` [PATCH v4 4/8] PCI: Split pci_assign_unassigned_resources to per root bus Yinghai Lu
2013-05-22  6:38   ` [PATCH v4 5/8] PCI: Skip IORESOURCE_IO allocation for root bus without ioport range Yinghai Lu
2013-05-22  6:38   ` [PATCH v4 6/8] PCI: Skip IORESOURCE_MMIO allocation for root bus without MMIO range Yinghai Lu
2013-05-22  6:38   ` [PATCH v4 7/8] PCI: Enable pci bridge when it is needed Yinghai Lu
2013-05-22  6:38   ` [PATCH v4 8/8] PCI: Retry assign unassigned resources for hotadd root bus Yinghai Lu
2013-06-01  6:03 ` [PATCH v5 0/7] PCI: Change assign unassigned resources per root bus bassis Yinghai Lu
2013-06-01  6:03   ` [PATCH v5 2/7] PCI: Don't use temp bus for pci_bus_release_bridge_resources Yinghai Lu
2013-06-01  6:03   ` [PATCH v5 3/7] PCI: Use pci_walk_bus to detect unassigned resources Yinghai Lu
2013-06-25 21:15     ` Bjorn Helgaas
2013-06-25 21:38       ` Benjamin Herrenschmidt
2013-06-25 21:46         ` Bjorn Helgaas
2013-06-26  8:07           ` Yinghai Lu
2013-06-26  7:38       ` Yinghai Lu
2013-06-01  6:03   ` [PATCH v5 4/7] PCI: Introduce enable_local to prepare per root bus handling Yinghai Lu
2013-06-01  6:03   ` [PATCH v5 5/7] PCI: Split pci_assign_unassigned_resources to per root bus Yinghai Lu
2013-06-01  6:03   ` [PATCH v5 6/7] PCI: Enable pci bridge when it is needed Yinghai Lu
2013-06-01  6:03   ` [PATCH v5 7/7] PCI: Retry assign unassigned resources for hotadd root bus Yinghai Lu
2013-06-01  6:03   ` [PATCH v5 1/7] PCI: Don't let mmio fallback to must-only, if ioport fails with must+optional Yinghai Lu
2013-06-22  3:00   ` [PATCH v5 0/7] PCI: Change assign unassigned resources per root bus bassis Yinghai Lu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1369204728-11165-2-git-send-email-yinghai@kernel.org \
    --to=yinghai@kernel.org \
    --cc=benh@kernel.crashing.org \
    --cc=bhelgaas@google.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=shangw@linux.vnet.ibm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®