From: Andrii Tseglytskyi <andrii.tseglytskyi@ti.com>
To: Kevin Hilman <khilman@linaro.org>, J Keerthy <j-keerthy@ti.com>
Cc: <linux-kernel@vger.kernel.org>, <linux-omap@vger.kernel.org>
Subject: [PATCH v1 1/3] PM / AVS: SmartReflex: use omap_sr * for errgen interfaces
Date: Mon, 27 May 2013 14:09:22 +0300 [thread overview]
Message-ID: <1369652964-14484-2-git-send-email-andrii.tseglytskyi@ti.com> (raw)
In-Reply-To: <1369652964-14484-1-git-send-email-andrii.tseglytskyi@ti.com>
SmartReflex driver interface is natively divided to two parts:
- external SmartReflex interface
- interface between SmartReflex driver and SmartReflex Class
Functions which belong to AVS class interface can use
struct omap_sr* instead of struct voltatedomain*, to provide a
direct connection between SR driver and SR class. This allows
us to optimize and not do additional lookups where none is
required.
sr_disable_errgen() and sr_configure_errgen() are interface
functions between SR driver and SR class. They are typically
used by Class driver to configure error generator module during
SmartReflex enable/disable sequence.
Now they take struct omap_sr* as input parameter.
Signed-off-by: Andrii Tseglytskyi <andrii.tseglytskyi@ti.com>
Acked-by: Nishanth Menon <nm@ti.com>
---
arch/arm/mach-omap2/smartreflex-class3.c | 4 ++--
drivers/power/avs/smartreflex.c | 26 +++++++++++++-------------
include/linux/power/smartreflex.h | 4 ++--
3 files changed, 17 insertions(+), 17 deletions(-)
diff --git a/arch/arm/mach-omap2/smartreflex-class3.c b/arch/arm/mach-omap2/smartreflex-class3.c
index aee3c89..6c26dc1 100644
--- a/arch/arm/mach-omap2/smartreflex-class3.c
+++ b/arch/arm/mach-omap2/smartreflex-class3.c
@@ -31,7 +31,7 @@ static int sr_class3_enable(struct omap_sr *sr)
static int sr_class3_disable(struct omap_sr *sr, int is_volt_reset)
{
- sr_disable_errgen(sr->voltdm);
+ sr_disable_errgen(sr);
omap_vp_disable(sr->voltdm);
sr_disable(sr->voltdm);
if (is_volt_reset)
@@ -42,7 +42,7 @@ static int sr_class3_disable(struct omap_sr *sr, int is_volt_reset)
static int sr_class3_configure(struct omap_sr *sr)
{
- return sr_configure_errgen(sr->voltdm);
+ return sr_configure_errgen(sr);
}
/* SR class3 structure */
diff --git a/drivers/power/avs/smartreflex.c b/drivers/power/avs/smartreflex.c
index 6b2238b..155a050 100644
--- a/drivers/power/avs/smartreflex.c
+++ b/drivers/power/avs/smartreflex.c
@@ -341,9 +341,9 @@ static struct omap_sr_nvalue_table *sr_retrieve_nvalue_row(
/* Public Functions */
/**
- * sr_configure_errgen() - Configures the smrtreflex to perform AVS using the
+ * sr_configure_errgen() - Configures the SmartReflex to perform AVS using the
* error generator module.
- * @voltdm: VDD pointer to which the SR module to be configured belongs to.
+ * @sr: SR module to be configured.
*
* This API is to be called from the smartreflex class driver to
* configure the error generator module inside the smartreflex module.
@@ -352,17 +352,17 @@ static struct omap_sr_nvalue_table *sr_retrieve_nvalue_row(
* SR CLASS 2 can choose between ERROR module and MINMAXAVG
* module. Returns 0 on success and error value in case of failure.
*/
-int sr_configure_errgen(struct voltagedomain *voltdm)
+int sr_configure_errgen(struct omap_sr *sr)
{
u32 sr_config, sr_errconfig, errconfig_offs;
u32 vpboundint_en, vpboundint_st;
u32 senp_en = 0, senn_en = 0;
u8 senp_shift, senn_shift;
- struct omap_sr *sr = _sr_lookup(voltdm);
- if (IS_ERR(sr)) {
- pr_warning("%s: omap_sr struct for voltdm not found\n", __func__);
- return PTR_ERR(sr);
+ if (!sr) {
+ pr_warn("%s: NULL omap_sr from %pF\n", __func__,
+ (void *)_RET_IP_);
+ return -EINVAL;
}
if (!sr->clk_length)
@@ -414,22 +414,22 @@ int sr_configure_errgen(struct voltagedomain *voltdm)
/**
* sr_disable_errgen() - Disables SmartReflex AVS module's errgen component
- * @voltdm: VDD pointer to which the SR module to be configured belongs to.
+ * @sr: SR module to be configured.
*
* This API is to be called from the smartreflex class driver to
* disable the error generator module inside the smartreflex module.
*
* Returns 0 on success and error value in case of failure.
*/
-int sr_disable_errgen(struct voltagedomain *voltdm)
+int sr_disable_errgen(struct omap_sr *sr)
{
u32 errconfig_offs;
u32 vpboundint_en, vpboundint_st;
- struct omap_sr *sr = _sr_lookup(voltdm);
- if (IS_ERR(sr)) {
- pr_warning("%s: omap_sr struct for voltdm not found\n", __func__);
- return PTR_ERR(sr);
+ if (!sr) {
+ pr_warn("%s: NULL omap_sr from %pF\n", __func__,
+ (void *)_RET_IP_);
+ return -EINVAL;
}
switch (sr->ip_type) {
diff --git a/include/linux/power/smartreflex.h b/include/linux/power/smartreflex.h
index c0f44c2..9c3b9ad 100644
--- a/include/linux/power/smartreflex.h
+++ b/include/linux/power/smartreflex.h
@@ -301,8 +301,8 @@ void omap_sr_register_pmic(struct omap_sr_pmic_data *pmic_data);
/* Smartreflex driver hooks to be called from Smartreflex class driver */
int sr_enable(struct voltagedomain *voltdm, unsigned long volt);
void sr_disable(struct voltagedomain *voltdm);
-int sr_configure_errgen(struct voltagedomain *voltdm);
-int sr_disable_errgen(struct voltagedomain *voltdm);
+int sr_configure_errgen(struct omap_sr *sr);
+int sr_disable_errgen(struct omap_sr *sr);
int sr_configure_minmax(struct voltagedomain *voltdm);
/* API to register the smartreflex class driver with the smartreflex driver */
--
1.7.9.5
next prev parent reply other threads:[~2013-05-27 11:10 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-05-27 11:09 [PATCH v1 0/3] PM / AVS: SmartReflex: use omap_sr * for class interfaces Andrii Tseglytskyi
2013-05-27 11:09 ` Andrii Tseglytskyi [this message]
2013-05-27 11:09 ` [PATCH v1 2/3] PM / AVS: SmartReflex: use omap_sr * for minmax interfaces Andrii Tseglytskyi
2013-05-27 11:09 ` [PATCH v1 3/3] PM / AVS: SmartReflex: use omap_sr * for enable/disable interface Andrii Tseglytskyi
2013-06-10 17:45 ` [PATCH v1 0/3] PM / AVS: SmartReflex: use omap_sr * for class interfaces Kevin Hilman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1369652964-14484-2-git-send-email-andrii.tseglytskyi@ti.com \
--to=andrii.tseglytskyi@ti.com \
--cc=j-keerthy@ti.com \
--cc=khilman@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®