[RFC 1/3] saa7115: Set saa7113 init to values from datasheet

["Jon Arne Jørgensen" <jonarne@jonarne.no>]

Change all default values in the initial setup table to match the table
in the datasheet.

Signed-off-by: Jon Arne Jørgensen <jonarne@jonarne.no>
---
 drivers/media/i2c/saa7115.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/media/i2c/saa7115.c b/drivers/media/i2c/saa7115.c
index d6f589a..4403679 100644
--- a/drivers/media/i2c/saa7115.c
+++ b/drivers/media/i2c/saa7115.c
@@ -223,12 +223,12 @@ static const unsigned char saa7111_init[] = {
 static const unsigned char saa7113_init[] = {
 	R_01_INC_DELAY, 0x08,
 	R_02_INPUT_CNTL_1, 0xc2,
-	R_03_INPUT_CNTL_2, 0x30,
+	R_03_INPUT_CNTL_2, 0x33,
 	R_04_INPUT_CNTL_3, 0x00,
 	R_05_INPUT_CNTL_4, 0x00,
-	R_06_H_SYNC_START, 0x89,
+	R_06_H_SYNC_START, 0xe9,
 	R_07_H_SYNC_STOP, 0x0d,
-	R_08_SYNC_CNTL, 0x88,
+	R_08_SYNC_CNTL, 0x98,
 	R_09_LUMA_CNTL, 0x01,
 	R_0A_LUMA_BRIGHT_CNTL, 0x80,
 	R_0B_LUMA_CONTRAST_CNTL, 0x47,
@@ -236,11 +236,11 @@ static const unsigned char saa7113_init[] = {
 	R_0D_CHROMA_HUE_CNTL, 0x00,
 	R_0E_CHROMA_CNTL_1, 0x01,
 	R_0F_CHROMA_GAIN_CNTL, 0x2a,
-	R_10_CHROMA_CNTL_2, 0x08,
+	R_10_CHROMA_CNTL_2, 0x00,
 	R_11_MODE_DELAY_CNTL, 0x0c,
-	R_12_RT_SIGNAL_CNTL, 0x07,
+	R_12_RT_SIGNAL_CNTL, 0x01,
 	R_13_RT_X_PORT_OUT_CNTL, 0x00,
-	R_14_ANAL_ADC_COMPAT_CNTL, 0x00,
+	R_14_ANAL_ADC_COMPAT_CNTL, 0x00,	/* RESERVED */
 	R_15_VGATE_START_FID_CHG, 0x00,
 	R_16_VGATE_STOP, 0x00,
 	R_17_MISC_VGATE_CONF_AND_MSB, 0x00,
-- 
1.8.2.3