From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1755550Ab3EaL37 (ORCPT ); Fri, 31 May 2013 07:29:59 -0400 Received: from arroyo.ext.ti.com ([192.94.94.40]:55757 "EHLO arroyo.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1755340Ab3EaL3h (ORCPT ); Fri, 31 May 2013 07:29:37 -0400 From: Roger Quadros To: CC: , , , , , , , , Roger Quadros Subject: [PATCH v2 2/2] USB: ehci-omap: select NOP_USB_XCEIV PHY driver Date: Fri, 31 May 2013 14:29:03 +0300 Message-ID: <1369999743-11758-3-git-send-email-rogerq@ti.com> X-Mailer: git-send-email 1.7.4.1 In-Reply-To: <1369999743-11758-1-git-send-email-rogerq@ti.com> References: <1369999743-11758-1-git-send-email-rogerq@ti.com> MIME-Version: 1.0 Content-Type: text/plain; charset="UTF-8" Content-Transfer-Encoding: 8bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org ehci-omap needs NOP_USB_XCEIV PHY driver to function properly, so select it. As the USB PHY drivers no longer depend on USB_PHY, it is safe to select the PHY drivers. Signed-off-by: Roger Quadros Tested-by: Adrien Vergé --- drivers/usb/host/Kconfig | 4 +--- 1 files changed, 1 insertions(+), 3 deletions(-) diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index 7ded784..48e1b70 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -150,13 +150,11 @@ config USB_EHCI_MXC config USB_EHCI_HCD_OMAP tristate "EHCI support for OMAP3 and later chips" depends on ARCH_OMAP + select NOP_USB_XCEIV default y ---help--- Enables support for the on-chip EHCI controller on OMAP3 and later chips. - If your system uses a PHY on the USB port, you will need to - enable USB_PHY and the appropriate PHY driver as well. Most - boards need the NOP_USB_XCEIV PHY driver. config USB_EHCI_HCD_ORION tristate "Support for Marvell EBU on-chip EHCI USB controller" -- 1.7.4.1