[PATCH 2/3] usb: misc: usb3503: Remove hardcoded disabling of ports 2 and 3

[Julius Werner <jwerner@chromium.org>]

The usb3503 driver currently disables port 2 and 3 without explaination.
It doesn't make sense to do this in a mainline Linux driver that should
support all platforms which use this chip. If specific use cases really
require ports to be disabled, this should either be done through local
patches or a configurable mechanism (such as a device tree property).
Until then, let's keep all ports enabled.

Signed-off-by: Julius Werner <jwerner@chromium.org>
---
 drivers/usb/misc/usb3503.c | 8 --------
 1 file changed, 8 deletions(-)

diff --git a/drivers/usb/misc/usb3503.c b/drivers/usb/misc/usb3503.c
index 73aeb87..a647a2e 100644
--- a/drivers/usb/misc/usb3503.c
+++ b/drivers/usb/misc/usb3503.c
@@ -134,14 +134,6 @@ static int usb3503_switch_mode(struct usb3503 *hub, enum usb3503_mode mode)
 			goto err_hubmode;
 		}
 
-		/* PDS : Port2,3 Disable For Self Powered Operation */
-		err = usb3503_set_bits(i2c, USB3503_PDS,
-				(USB3503_PORT2 | USB3503_PORT3));
-		if (err < 0) {
-			dev_err(&i2c->dev, "PDS failed (%d)\n", err);
-			goto err_hubmode;
-		}
-
 		/* CFG1 : SELF_BUS_PWR -> Self-Powerd operation */
 		err = usb3503_set_bits(i2c, USB3503_CFG1, USB3503_SELF_BUS_PWR);
 		if (err < 0) {
-- 
1.7.12.4