From: Ferruh Yigit <fery@cypress.com>
To: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: ttdrivers@cypress.com,
Javier Martinez Canillas <javier@dowhile0.org>,
Henrik Rydberg <rydberg@euromail.se>,
Simon Budig <simon.budig@kernelconcepts.de>,
Alexander Shiyan <shc_work@mail.ru>,
Samuel Ortiz <sameo@linux.intel.com>,
Heiko Carstens <heiko.carstens@de.ibm.com>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Joonyoung Shim <jy0922.shim@samsung.com>,
Shawn Landden <shawnlandden@gmail.com>,
Ashish Jangam <ashish.jangam@kpitcummins.com>,
Olivier Sobrie <olivier@sobrie.be>,
linux-kernel@vger.kernel.org, linux-input@vger.kernel.org,
Ferruh Yigit <fery@cypress.com>
Subject: [PATCH v3 1/4] Input: cyttsp - I2C driver split into two modules
Date: Tue, 4 Jun 2013 12:34:41 +0300 [thread overview]
Message-ID: <1370338484-26573-2-git-send-email-fery@cypress.com> (raw)
In-Reply-To: <1370338484-26573-1-git-send-email-fery@cypress.com>
Existing I2C code is for TrueTouch Gen3 devices
TrueTouch Gen4 device is using same protocol, will split driver into
two pieces to use common code with both drivers.
Read/Write functions parameter list modified, since shared code will
be used by two separate drivers and these drivers are not sharing same
structs, parameters updated to use common structures.
Signed-off-by: Ferruh Yigit <fery@cypress.com>
---
drivers/input/touchscreen/Makefile | 2 +-
drivers/input/touchscreen/cyttsp_core.c | 6 +-
drivers/input/touchscreen/cyttsp_core.h | 11 +++-
drivers/input/touchscreen/cyttsp_i2c.c | 50 +---------------
drivers/input/touchscreen/cyttsp_i2c_common.c | 79 +++++++++++++++++++++++++
drivers/input/touchscreen/cyttsp_spi.c | 38 ++++++------
6 files changed, 112 insertions(+), 74 deletions(-)
create mode 100644 drivers/input/touchscreen/cyttsp_i2c_common.c
diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile
index 6bfbeab..2b378b1 100644
--- a/drivers/input/touchscreen/Makefile
+++ b/drivers/input/touchscreen/Makefile
@@ -18,7 +18,7 @@ obj-$(CONFIG_TOUCHSCREEN_AUO_PIXCIR) += auo-pixcir-ts.o
obj-$(CONFIG_TOUCHSCREEN_BU21013) += bu21013_ts.o
obj-$(CONFIG_TOUCHSCREEN_CY8CTMG110) += cy8ctmg110_ts.o
obj-$(CONFIG_TOUCHSCREEN_CYTTSP_CORE) += cyttsp_core.o
-obj-$(CONFIG_TOUCHSCREEN_CYTTSP_I2C) += cyttsp_i2c.o
+obj-$(CONFIG_TOUCHSCREEN_CYTTSP_I2C) += cyttsp_i2c.o cyttsp_i2c_common.o
obj-$(CONFIG_TOUCHSCREEN_CYTTSP_SPI) += cyttsp_spi.o
obj-$(CONFIG_TOUCHSCREEN_DA9034) += da9034-ts.o
obj-$(CONFIG_TOUCHSCREEN_DA9052) += da9052_tsi.o
diff --git a/drivers/input/touchscreen/cyttsp_core.c b/drivers/input/touchscreen/cyttsp_core.c
index 8e60437..4824fa3 100644
--- a/drivers/input/touchscreen/cyttsp_core.c
+++ b/drivers/input/touchscreen/cyttsp_core.c
@@ -84,7 +84,8 @@ static int ttsp_read_block_data(struct cyttsp *ts, u8 command,
int tries;
for (tries = 0; tries < CY_NUM_RETRY; tries++) {
- error = ts->bus_ops->read(ts, command, length, buf);
+ error = ts->bus_ops->read(ts->dev, ts->xfer_buf, command,
+ length, buf);
if (!error)
return 0;
@@ -101,7 +102,8 @@ static int ttsp_write_block_data(struct cyttsp *ts, u8 command,
int tries;
for (tries = 0; tries < CY_NUM_RETRY; tries++) {
- error = ts->bus_ops->write(ts, command, length, buf);
+ error = ts->bus_ops->write(ts->dev, ts->xfer_buf, command,
+ length, buf);
if (!error)
return 0;
diff --git a/drivers/input/touchscreen/cyttsp_core.h b/drivers/input/touchscreen/cyttsp_core.h
index 1aa3c69..d0c9e48 100644
--- a/drivers/input/touchscreen/cyttsp_core.h
+++ b/drivers/input/touchscreen/cyttsp_core.h
@@ -112,9 +112,10 @@ struct cyttsp;
struct cyttsp_bus_ops {
u16 bustype;
- int (*write)(struct cyttsp *ts,
- u8 addr, u8 length, const void *values);
- int (*read)(struct cyttsp *ts, u8 addr, u8 length, void *values);
+ int (*write)(struct device *dev, u8 *xfer_buf, u8 addr, u8 length,
+ const void *values);
+ int (*read)(struct device *dev, u8 *xfer_buf, u8 addr, u8 length,
+ void *values);
};
enum cyttsp_state {
@@ -144,6 +145,10 @@ struct cyttsp *cyttsp_probe(const struct cyttsp_bus_ops *bus_ops,
struct device *dev, int irq, size_t xfer_buf_size);
void cyttsp_remove(struct cyttsp *ts);
+int cyttsp_i2c_write_block_data(struct device *dev, u8 *xfer_buf, u8 addr,
+ u8 length, const void *values);
+int cyttsp_i2c_read_block_data(struct device *dev, u8 *xfer_buf, u8 addr,
+ u8 length, void *values);
extern const struct dev_pm_ops cyttsp_pm_ops;
#endif /* __CYTTSP_CORE_H__ */
diff --git a/drivers/input/touchscreen/cyttsp_i2c.c b/drivers/input/touchscreen/cyttsp_i2c.c
index 4dbdf44..63104a8 100644
--- a/drivers/input/touchscreen/cyttsp_i2c.c
+++ b/drivers/input/touchscreen/cyttsp_i2c.c
@@ -1,5 +1,5 @@
/*
- * Source for:
+ * cyttsp_i2c.c
* Cypress TrueTouch(TM) Standard Product (TTSP) I2C touchscreen driver.
* For use with Cypress Txx3xx parts.
* Supported parts include:
@@ -19,11 +19,7 @@
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
- *
- * Contact Cypress Semiconductor at www.cypress.com <kev@cypress.com>
+ * Contact Cypress Semiconductor at www.cypress.com <ttdrivers@cypress.com>
*
*/
@@ -34,47 +30,6 @@
#define CY_I2C_DATA_SIZE 128
-static int cyttsp_i2c_read_block_data(struct cyttsp *ts,
- u8 addr, u8 length, void *values)
-{
- struct i2c_client *client = to_i2c_client(ts->dev);
- struct i2c_msg msgs[] = {
- {
- .addr = client->addr,
- .flags = 0,
- .len = 1,
- .buf = &addr,
- },
- {
- .addr = client->addr,
- .flags = I2C_M_RD,
- .len = length,
- .buf = values,
- },
- };
- int retval;
-
- retval = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
- if (retval < 0)
- return retval;
-
- return retval != ARRAY_SIZE(msgs) ? -EIO : 0;
-}
-
-static int cyttsp_i2c_write_block_data(struct cyttsp *ts,
- u8 addr, u8 length, const void *values)
-{
- struct i2c_client *client = to_i2c_client(ts->dev);
- int retval;
-
- ts->xfer_buf[0] = addr;
- memcpy(&ts->xfer_buf[1], values, length);
-
- retval = i2c_master_send(client, ts->xfer_buf, length + 1);
-
- return retval < 0 ? retval : 0;
-}
-
static const struct cyttsp_bus_ops cyttsp_i2c_bus_ops = {
.bustype = BUS_I2C,
.write = cyttsp_i2c_write_block_data,
@@ -98,7 +53,6 @@ static int cyttsp_i2c_probe(struct i2c_client *client,
return PTR_ERR(ts);
i2c_set_clientdata(client, ts);
-
return 0;
}
diff --git a/drivers/input/touchscreen/cyttsp_i2c_common.c b/drivers/input/touchscreen/cyttsp_i2c_common.c
new file mode 100644
index 0000000..07c553f
--- /dev/null
+++ b/drivers/input/touchscreen/cyttsp_i2c_common.c
@@ -0,0 +1,79 @@
+/*
+ * cyttsp_i2c_common.c
+ * Cypress TrueTouch(TM) Standard Product (TTSP) I2C touchscreen driver.
+ * For use with Cypress Txx3xx and Txx4xx parts.
+ * Supported parts include:
+ * CY8CTST341
+ * CY8CTMA340
+ * TMA4XX
+ * TMA1036
+ *
+ * Copyright (C) 2009, 2010, 2011 Cypress Semiconductor, Inc.
+ * Copyright (C) 2012 Javier Martinez Canillas <javier@dowhile0.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2, and only version 2, as published by the
+ * Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Contact Cypress Semiconductor at www.cypress.com <ttdrivers@cypress.com>
+ *
+ */
+
+#include <linux/device.h>
+#include <linux/export.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/types.h>
+
+int cyttsp_i2c_read_block_data(struct device *dev, u8 *xfer_buf,
+ u8 addr, u8 length, void *values)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct i2c_msg msgs[] = {
+ {
+ .addr = client->addr,
+ .flags = 0,
+ .len = 1,
+ .buf = &addr,
+ },
+ {
+ .addr = client->addr,
+ .flags = I2C_M_RD,
+ .len = length,
+ .buf = values,
+ },
+ };
+ int retval;
+
+ retval = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
+ if (retval < 0)
+ return retval;
+
+ return retval != ARRAY_SIZE(msgs) ? -EIO : 0;
+}
+EXPORT_SYMBOL_GPL(cyttsp_i2c_read_block_data);
+
+int cyttsp_i2c_write_block_data(struct device *dev, u8 *xfer_buf,
+ u8 addr, u8 length, const void *values)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ int retval;
+
+ xfer_buf[0] = addr;
+ memcpy(&xfer_buf[1], values, length);
+
+ retval = i2c_master_send(client, xfer_buf, length + 1);
+
+ return retval < 0 ? retval : 0;
+}
+EXPORT_SYMBOL_GPL(cyttsp_i2c_write_block_data);
+
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Cypress");
diff --git a/drivers/input/touchscreen/cyttsp_spi.c b/drivers/input/touchscreen/cyttsp_spi.c
index 861b7f7..1df6253 100644
--- a/drivers/input/touchscreen/cyttsp_spi.c
+++ b/drivers/input/touchscreen/cyttsp_spi.c
@@ -8,6 +8,7 @@
*
* Copyright (C) 2009, 2010, 2011 Cypress Semiconductor, Inc.
* Copyright (C) 2012 Javier Martinez Canillas <javier@dowhile0.org>
+ * Copyright (C) 2013 Cypress Semiconductor
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
@@ -19,11 +20,7 @@
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
- *
- * Contact Cypress Semiconductor at www.cypress.com <kev@cypress.com>
+ * Contact Cypress Semiconductor at www.cypress.com <ttdrivers@cypress.com>
*
*/
@@ -43,19 +40,19 @@
#define CY_SPI_DATA_BUF_SIZE (CY_SPI_CMD_BYTES + CY_SPI_DATA_SIZE)
#define CY_SPI_BITS_PER_WORD 8
-static int cyttsp_spi_xfer(struct cyttsp *ts,
+static int cyttsp_spi_xfer(struct device *dev, u8 *xfer_buf,
u8 op, u8 reg, u8 *buf, int length)
{
- struct spi_device *spi = to_spi_device(ts->dev);
+ struct spi_device *spi = to_spi_device(dev);
struct spi_message msg;
struct spi_transfer xfer[2];
- u8 *wr_buf = &ts->xfer_buf[0];
- u8 *rd_buf = &ts->xfer_buf[CY_SPI_DATA_BUF_SIZE];
+ u8 *wr_buf = &xfer_buf[0];
+ u8 *rd_buf = &xfer_buf[CY_SPI_DATA_BUF_SIZE];
int retval;
int i;
if (length > CY_SPI_DATA_SIZE) {
- dev_err(ts->dev, "%s: length %d is too big.\n",
+ dev_err(dev, "%s: length %d is too big.\n",
__func__, length);
return -EINVAL;
}
@@ -95,13 +92,13 @@ static int cyttsp_spi_xfer(struct cyttsp *ts,
break;
default:
- dev_err(ts->dev, "%s: bad operation code=%d\n", __func__, op);
+ dev_err(dev, "%s: bad operation code=%d\n", __func__, op);
return -EINVAL;
}
retval = spi_sync(spi, &msg);
if (retval < 0) {
- dev_dbg(ts->dev, "%s: spi_sync() error %d, len=%d, op=%d\n",
+ dev_dbg(dev, "%s: spi_sync() error %d, len=%d, op=%d\n",
__func__, retval, xfer[1].len, op);
/*
@@ -113,14 +110,13 @@ static int cyttsp_spi_xfer(struct cyttsp *ts,
if (rd_buf[CY_SPI_SYNC_BYTE] != CY_SPI_SYNC_ACK1 ||
rd_buf[CY_SPI_SYNC_BYTE + 1] != CY_SPI_SYNC_ACK2) {
-
- dev_dbg(ts->dev, "%s: operation %d failed\n", __func__, op);
+ dev_dbg(dev, "%s: operation %d failed\n", __func__, op);
for (i = 0; i < CY_SPI_CMD_BYTES; i++)
- dev_dbg(ts->dev, "%s: test rd_buf[%d]:0x%02x\n",
+ dev_dbg(dev, "%s: test rd_buf[%d]:0x%02x\n",
__func__, i, rd_buf[i]);
for (i = 0; i < length; i++)
- dev_dbg(ts->dev, "%s: test buf[%d]:0x%02x\n",
+ dev_dbg(dev, "%s: test buf[%d]:0x%02x\n",
__func__, i, buf[i]);
return -EIO;
@@ -129,16 +125,18 @@ static int cyttsp_spi_xfer(struct cyttsp *ts,
return 0;
}
-static int cyttsp_spi_read_block_data(struct cyttsp *ts,
+static int cyttsp_spi_read_block_data(struct device *dev, u8 *xfer_buf,
u8 addr, u8 length, void *data)
{
- return cyttsp_spi_xfer(ts, CY_SPI_RD_OP, addr, data, length);
+ return cyttsp_spi_xfer(dev, xfer_buf, CY_SPI_RD_OP, addr, data,
+ length);
}
-static int cyttsp_spi_write_block_data(struct cyttsp *ts,
+static int cyttsp_spi_write_block_data(struct device *dev, u8 *xfer_buf,
u8 addr, u8 length, const void *data)
{
- return cyttsp_spi_xfer(ts, CY_SPI_WR_OP, addr, (void *)data, length);
+ return cyttsp_spi_xfer(dev, xfer_buf, CY_SPI_WR_OP, addr, (void *)data,
+ length);
}
static const struct cyttsp_bus_ops cyttsp_spi_bus_ops = {
--
1.7.9.5
next prev parent reply other threads:[~2013-06-04 9:35 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-06-04 9:34 [PATCH v3 0/4] Input: cyttsp4 - driver for Cypress TMA4XX touchscreen devices Ferruh Yigit
2013-06-04 9:34 ` Ferruh Yigit [this message]
2013-06-06 20:20 ` [PATCH v3 1/4] Input: cyttsp - I2C driver split into two modules Greg Kroah-Hartman
2013-06-04 9:34 ` [PATCH v3 2/4] Input: cyttsp4 - Core driver for Cypress TMA4XX touchscreen devices Ferruh Yigit
2013-06-06 20:22 ` Greg Kroah-Hartman
2013-06-04 9:34 ` [PATCH v3 3/4] Input: cyttsp4 - I2C " Ferruh Yigit
2013-06-06 20:22 ` Greg Kroah-Hartman
2013-06-04 9:34 ` [PATCH v3 4/4] Input: cyttsp4 - SPI " Ferruh Yigit
2013-06-06 20:22 ` Greg Kroah-Hartman
2013-06-07 7:49 ` [PATCH v3 0/4] Input: cyttsp4 - " Javier Martinez Canillas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1370338484-26573-2-git-send-email-fery@cypress.com \
--to=fery@cypress.com \
--cc=ashish.jangam@kpitcummins.com \
--cc=dmitry.torokhov@gmail.com \
--cc=gregkh@linuxfoundation.org \
--cc=heiko.carstens@de.ibm.com \
--cc=javier@dowhile0.org \
--cc=jy0922.shim@samsung.com \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=olivier@sobrie.be \
--cc=rydberg@euromail.se \
--cc=sameo@linux.intel.com \
--cc=shawnlandden@gmail.com \
--cc=shc_work@mail.ru \
--cc=simon.budig@kernelconcepts.de \
--cc=ttdrivers@cypress.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®