mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Boris BREZILLON <b.brezillon@overkiz.com>
To: Mike Turquette <mturquette@linaro.org>,
	Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>,
	Nicolas Ferre <nicolas.ferre@atmel.com>,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org,
	Grant Likely <grant.likely@linaro.org>,
	Rob Herring <rob.herring@calxeda.com>
Cc: Boris BREZILLON <b.brezillon@overkiz.com>,
	devicetree-discuss@lists.ozlabs.org
Subject: [RFC 05/50] ARM: at91: add PMC system clocks support using common clk framework.
Date: Fri,  7 Jun 2013 10:34:16 +0200	[thread overview]
Message-ID: <1370594119-5342-6-git-send-email-b.brezillon@overkiz.com> (raw)
In-Reply-To: <1370594119-5342-1-git-send-email-b.brezillon@overkiz.com>


This is the at91 system clock implementation using common clk framework.

Some peripheral needs to enable a "system" clock in order to work properly.
Each system clock is given an id which is the bit offset used in SCER/SCDR
registers.

Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com>
---
 drivers/clk/at91/Makefile     |    1 +
 drivers/clk/at91/clk-system.c |  189 +++++++++++++++++++++++++++++++++++++++++
 include/linux/clk/at91.h      |    3 +
 3 files changed, 193 insertions(+)

diff --git a/drivers/clk/at91/Makefile b/drivers/clk/at91/Makefile
index d41f616..13e5714 100644
--- a/drivers/clk/at91/Makefile
+++ b/drivers/clk/at91/Makefile
@@ -3,3 +3,4 @@
 #
 
 obj-y += clk-main.o clk-pll.o clk-plldiv.o clk-master.o
+obj-y += clk-system.o
diff --git a/drivers/clk/at91/clk-system.c b/drivers/clk/at91/clk-system.c
new file mode 100644
index 0000000..21af468
--- /dev/null
+++ b/drivers/clk/at91/clk-system.c
@@ -0,0 +1,189 @@
+/*
+ * drivers/clk/at91/clk-system.c
+ *
+ *  Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/clkdev.h>
+#include <linux/clk/at91.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/io.h>
+
+#define SYSTEM_MAX		32
+
+#define to_clk_system(hw) container_of(hw, struct clk_system, hw)
+struct clk_system {
+	struct clk_hw hw;
+	u8 id;
+};
+
+static int clk_system_enable(struct clk_hw *hw)
+{
+	struct clk_system *sys = to_clk_system(hw);
+	at91_pmc_write(AT91_PMC_SCER, sys->id);
+	return 0;
+}
+
+static void clk_system_disable(struct clk_hw *hw)
+{
+	struct clk_system *sys = to_clk_system(hw);
+	at91_pmc_write(AT91_PMC_SCDR, 1 << sys->id);
+}
+
+static int clk_system_is_enabled(struct clk_hw *hw)
+{
+	struct clk_system *sys = to_clk_system(hw);
+	return !!(at91_pmc_read(AT91_PMC_SCSR) & (sys->id));
+}
+
+static const struct clk_ops system_ops = {
+	.enable = clk_system_enable,
+	.disable = clk_system_disable,
+	.is_enabled = clk_system_is_enabled,
+};
+
+struct clk * __init
+at91_clk_register_system(const char *name, const char *parent_name, u8 id)
+{
+	struct clk_system *sys;
+	struct clk *clk = NULL;
+	struct clk_init_data init;
+
+	id &= 31;
+
+	sys = kzalloc(sizeof(*sys), GFP_KERNEL);
+	if (!sys)
+		return ERR_PTR(-ENOMEM);
+
+	init.name = name;
+	init.ops = &system_ops;
+	init.parent_names = (parent_name ? &parent_name : NULL);
+	init.num_parents = (parent_name ? 1 : 0);
+	init.flags = 0;
+
+	sys->id = id;
+	sys->hw.init = &init;
+
+	clk = clk_register(NULL, &sys->hw);
+
+	if (IS_ERR(clk))
+		kfree(sys);
+
+	return clk;
+}
+
+#if defined(CONFIG_OF)
+struct clk_system_data {
+	struct clk **clks;
+	u8 *ids;
+	unsigned int clk_num;
+};
+
+static struct clk * __init
+of_clk_src_system_get(struct of_phandle_args *clkspec, void *data)
+{
+	struct clk_system_data *clk_data = data;
+	unsigned int id = clkspec->args[0];
+	int i;
+
+	if (id >= SYSTEM_MAX)
+		goto err;
+
+	for (i = 0; i < clk_data->clk_num; i++) {
+		if (clk_data->ids[i] == id)
+			return clk_data->clks[i];
+	}
+
+err:
+	pr_err("%s: invalid clock id %d\n", __func__, id);
+	return ERR_PTR(-EINVAL);
+}
+
+static void __init
+of_at91_clk_sys_setup(struct device_node *np)
+{
+	int i;
+	int num;
+	u32 id;
+	struct clk *clk;
+	u8 *ids;
+	struct clk **clks;
+	struct clk_system_data *clktab;
+	const char *parent_name;
+	const char *name = np->name;
+
+	parent_name = of_clk_get_parent_name(np, 0);
+	if (!parent_name)
+		return;
+
+	if (!of_get_property(np, "ids", &num))
+		return;
+	num /= 4;
+	if (num > SYSTEM_MAX)
+		return;
+
+	if (of_count_phandle_with_args(np, "clocks", "#clock-cells") != num)
+		return;
+
+	if (of_property_count_strings(np, "clock-output-names") != num)
+		return;
+
+	clktab = kzalloc(sizeof(*clktab), GFP_KERNEL);
+	if (!clktab)
+		return;
+
+	ids = kzalloc(num * sizeof(*ids), GFP_KERNEL);
+	if (!ids)
+		goto out_free_clktab;
+
+	clks = kzalloc(num * sizeof(*clks), GFP_KERNEL);
+	if (!clks)
+		goto out_free_ids;
+
+	for (i = 0; i < num; i++) {
+		of_property_read_u32_index(np, "ids", i, &id);
+		if (id >= SYSTEM_MAX)
+			goto out_free_clks;
+		of_property_read_string_index(np, "clock-output-names",
+					      i, &name);
+		parent_name = of_clk_get_parent_name(np, i);
+		if (!parent_name)
+			goto out_free_clks;
+
+		clk = at91_clk_register_system(name, parent_name, id);
+		if (IS_ERR(clk))
+			goto out_free_clks;
+
+		clks[i] = clk;
+		ids[i] = id;
+	}
+
+	clktab->clk_num = num;
+	clktab->clks = clks;
+	clktab->ids = ids;
+	of_clk_add_provider(np, of_clk_src_system_get, clktab);
+	return;
+
+out_free_clks:
+	kfree(clks);
+out_free_ids:
+	kfree(ids);
+out_free_clktab:
+	kfree(clktab);
+}
+
+static void __init of_at91rm9200_clk_sys_setup(struct device_node *np)
+{
+	of_at91_clk_sys_setup(np);
+}
+CLK_OF_DECLARE(at91rm9200_clk_sys, "atmel,at91rm9200-clk-system",
+	       of_at91rm9200_clk_sys_setup);
+#endif
diff --git a/include/linux/clk/at91.h b/include/linux/clk/at91.h
index a960e2f..c886226 100644
--- a/include/linux/clk/at91.h
+++ b/include/linux/clk/at91.h
@@ -256,4 +256,7 @@ at91_clk_register_master(const char *name, int num_parents,
 			 struct clk_master_characteristics *characteristics);
 
 
+struct clk * __init
+at91_clk_register_system(const char *name, const char *parent_name, u8 id);
+
 #endif
-- 
1.7.9.5


  parent reply	other threads:[~2013-06-07  8:55 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-06-07  8:34 [RFC 00/50] ARM: at91: move to " Boris BREZILLON
2013-06-07  8:34 ` [RFC 01/50] ARM: at91: move arch/arm/mach-at91/include/mach/at91_pmc.h to include/linux/clk/at91.h Boris BREZILLON
2013-06-07  8:34 ` [RFC 02/50] ARM: at91: add PMC main clock support using common clk framework Boris BREZILLON
2013-06-07  8:34 ` [RFC 03/50] ARM: at91: add PMC pll clocks " Boris BREZILLON
2013-06-07  8:34 ` [RFC 04/50] ARM: at91: add PMC master clock " Boris BREZILLON
2013-06-07  8:34 ` Boris BREZILLON [this message]
2013-06-07  8:34 ` [RFC 06/50] ARM: at91: add PMC peripheral clocks " Boris BREZILLON
2013-06-07  8:34 ` [RFC 07/50] ARM: at91: add PMC programmable " Boris BREZILLON
2013-06-07  8:34 ` [RFC 08/50] ARM: at91: add PMC utmi clock " Boris BREZILLON
2013-06-07  8:34 ` [RFC 09/50] ARM: at91: add PMC usb " Boris BREZILLON
2013-06-07  8:34 ` [RFC 10/50] ARM: at91: add PMC smd " Boris BREZILLON
2013-06-07  8:34 ` [RFC 11/50] ARM: at91: add PMC clk device tree binding doc Boris BREZILLON
2013-06-07  9:22 ` [RFC 00/50] ARM: at91: move to common clk framework Nicolas Ferre
2013-06-07  9:32   ` boris brezillon
2013-06-07 10:14     ` Gregory CLEMENT
2013-06-07 20:06       ` boris brezillon

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1370594119-5342-6-git-send-email-b.brezillon@overkiz.com \
    --to=b.brezillon@overkiz.com \
    --cc=devicetree-discuss@lists.ozlabs.org \
    --cc=grant.likely@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mturquette@linaro.org \
    --cc=nicolas.ferre@atmel.com \
    --cc=plagnioj@jcrosoft.com \
    --cc=rob.herring@calxeda.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®