From: Boris BREZILLON <b.brezillon@overkiz.com>
To: Mike Turquette <mturquette@linaro.org>,
Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>,
Nicolas Ferre <nicolas.ferre@atmel.com>,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Cc: Russell King <linux@arm.linux.org.uk>
Subject: [RFC PATCH 39/50] ARM: at91/dt: move at91sam9g45 SoC to new at91 clk implem
Date: Fri, 7 Jun 2013 20:12:46 +0200 [thread overview]
Message-ID: <1370628766-2882-1-git-send-email-b.brezillon@overkiz.com> (raw)
In-Reply-To: <1370615115-16979-1-git-send-email-b.brezillon@overkiz.com>
Define at91sam9g45 clocks in at91sam9g45 device tree.
Add references to the appropriate clocks in each peripheral.
Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com>
---
arch/arm/boot/dts/at91sam9g45.dtsi | 157 ++++++++++++++++++++++++++++++++++++
1 file changed, 157 insertions(+)
diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi
index faec17d..413c6cf 100644
--- a/arch/arm/boot/dts/at91sam9g45.dtsi
+++ b/arch/arm/boot/dts/at91sam9g45.dtsi
@@ -76,6 +76,119 @@
pmc: pmc@fffffc00 {
compatible = "atmel,at91rm9200-pmc";
reg = <0xfffffc00 0x100>;
+
+ clk32k: slck {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ };
+
+ main: mainck {
+ compatible = "atmel,at91rm9200-clk-main", "fixed-clock";
+ #clock-cells = <0>;
+ clocks = <&clk32k>;
+ };
+
+ plla: pllack {
+ compatible = "atmel,at91sam9g45-clk-pll";
+ #clock-cells = <0>;
+ clocks = <&main>;
+ id = <0>;
+ input = <2000000 32000000>;
+ output = <74500000 800000000
+ 69500000 750000000
+ 64500000 700000000
+ 59500000 650000000
+ 54500000 600000000
+ 49500000 550000000
+ 44500000 500000000
+ 40000000 450000000>;
+ out = <0 1 2 3 0 1 2 3>;
+ icpll = <0 0 0 0 1 1 1 1>;
+ };
+
+ plladiv: plladivck {
+ compatible = "atmel,at91sam9x5-clk-plldiv";
+ #clock-cells = <0>;
+ clocks = <&plla>;
+ };
+
+ utmi: utmick {
+ compatible = "atmel,at91sam9x5-clk-utmi";
+ #clock-cells = <0>;
+ clocks = <&main>;
+ };
+
+ mck: masterck {
+ compatible = "atmel,at91rm9200-clk-master";
+ #clock-cells = <0>;
+ clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>;
+ output = <0 133000000>;
+ divisors = <1 2 4 3>;
+ };
+
+ usb: usbck {
+ compatible = "atmel,at91sam9x5-clk-usb";
+ #clock-cells = <0>;
+ clocks = <&plladiv>, <&utmi>;
+ };
+
+ prog: progck {
+ compatible = "atmel,at91sam9g45-clk-programmable";
+ #clock-cells = <1>;
+ ids = <0 1>;
+ clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>, <&mck>;
+ clock-output-names = "prog0", "prog1";
+ };
+
+ system: systemck {
+ compatible = "atmel,at91rm9200-clk-system";
+ #clock-cells = <1>;
+ ids = <2 6 8 9>;
+ clocks = <&mck>, <&usb>, <&prog 0>, <&prog 1>;
+ clock-output-names = "ddrck", "uhpck", "pck0", "pck1";
+ };
+
+ periph: periphck {
+ compatible = "atmel,at91rm9200-clk-peripheral";
+ #clock-cells = <1>;
+ clocks = <&mck>;
+ ids = <2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
+ 17 18 19 20 21 22 23 24 25 26 27 29>;
+ clock-output-names = "pioA_clk",
+ "pioB_clk",
+ "pioC_clk",
+ "pioDE_clk",
+ "trng_clk",
+ "usart0_clk",
+ "usart1_clk",
+ "usart2_clk",
+ "usart3_clk",
+ "mci0_clk",
+ "twi0_clk",
+ "twi1_clk",
+ "spi0_clk",
+ "spi1_clk",
+ "ssc0_clk",
+ "ssc1_clk",
+ "tcb0_clk",
+ "pwm_clk",
+ "tsc_clk",
+ "dma_clk",
+ "uhphs_clk",
+ "lcdc_clk",
+ "ac97_clk",
+ "pclk",
+ "isi_clk",
+ "udphs_clk",
+ "mci1_clk";
+
+ adc_op_clk: adc_op_clk{
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <13200000>;
+ };
+ };
};
rstc@fffffd00 {
@@ -87,6 +200,7 @@
compatible = "atmel,at91sam9260-pit";
reg = <0xfffffd30 0xf>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+ clocks = <&mck>;
};
@@ -99,12 +213,16 @@
compatible = "atmel,at91rm9200-tcb";
reg = <0xfff7c000 0x100>;
interrupts = <18 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&periph 18>;
+ clock-names = "t0_clk";
};
tcb1: timer@fffd4000 {
compatible = "atmel,at91rm9200-tcb";
reg = <0xfffd4000 0x100>;
interrupts = <18 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&periph 18>;
+ clock-names = "t0_clk";
};
dma: dma-controller@ffffec00 {
@@ -112,6 +230,8 @@
reg = <0xffffec00 0x200>;
interrupts = <21 IRQ_TYPE_LEVEL_HIGH 0>;
#dma-cells = <2>;
+ clocks = <&periph 21>;
+ clock-names = "dma_clk";
};
pinctrl@fffff200 {
@@ -428,6 +548,7 @@
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
+ clocks = <&periph 2>;
};
pioB: gpio@fffff400 {
@@ -438,6 +559,7 @@
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
+ clocks = <&periph 3>;
};
pioC: gpio@fffff600 {
@@ -448,6 +570,7 @@
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
+ clocks = <&periph 4>;
};
pioD: gpio@fffff800 {
@@ -458,6 +581,7 @@
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
+ clocks = <&periph 5>;
};
pioE: gpio@fffffa00 {
@@ -468,6 +592,7 @@
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
+ clocks = <&periph 5>;
};
};
@@ -477,6 +602,8 @@
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_dbgu>;
+ clocks = <&mck>;
+ clock-names = "usart";
status = "disabled";
};
@@ -488,6 +615,8 @@
atmel,use-dma-tx;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usart0>;
+ clocks = <&periph 7>;
+ clock-names = "usart";
status = "disabled";
};
@@ -499,6 +628,8 @@
atmel,use-dma-tx;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usart1>;
+ clocks = <&periph 8>;
+ clock-names = "usart";
status = "disabled";
};
@@ -510,6 +641,8 @@
atmel,use-dma-tx;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usart2>;
+ clocks = <&periph 9>;
+ clock-names = "usart";
status = "disabled";
};
@@ -521,6 +654,8 @@
atmel,use-dma-tx;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usart3>;
+ clocks = <&periph 10>;
+ clock-names = "usart";
status = "disabled";
};
@@ -530,6 +665,8 @@
interrupts = <25 IRQ_TYPE_LEVEL_HIGH 3>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_macb_rmii>;
+ clocks = <&periph 25>, <&periph 25>;
+ clock-names = "hclk", "pclk";
status = "disabled";
};
@@ -539,6 +676,7 @@
interrupts = <12 IRQ_TYPE_LEVEL_HIGH 6>;
#address-cells = <1>;
#size-cells = <0>;
+ clocks = <&periph 12>;
status = "disabled";
};
@@ -548,6 +686,7 @@
interrupts = <13 IRQ_TYPE_LEVEL_HIGH 6>;
#address-cells = <1>;
#size-cells = <0>;
+ clocks = <&periph 13>;
status = "disabled";
};
@@ -557,6 +696,8 @@
interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
+ clocks = <&periph 16>;
+ clock-names = "pclk";
status = "disabled";
};
@@ -566,6 +707,8 @@
interrupts = <17 IRQ_TYPE_LEVEL_HIGH 5>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
+ clocks = <&periph 17>;
+ clock-names = "pclk";
status = "disabled";
};
@@ -573,6 +716,8 @@
compatible = "atmel,at91sam9260-adc";
reg = <0xfffb0000 0x100>;
interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&periph 20>, <&adc_op_clk>;
+ clock-names = "adc_clk", "adc_op_clk";
atmel,adc-use-external-triggers;
atmel,adc-channels-used = <0xff>;
atmel,adc-vref = <3300>;
@@ -617,6 +762,8 @@
dma-names = "rxtx";
#address-cells = <1>;
#size-cells = <0>;
+ clocks = <&periph 29>;
+ clock-names = "mci_clk";
status = "disabled";
};
@@ -628,6 +775,8 @@
dma-names = "rxtx";
#address-cells = <1>;
#size-cells = <0>;
+ clocks = <&periph 29>;
+ clock-names = "mci_clk";
status = "disabled";
};
@@ -645,6 +794,8 @@
interrupts = <14 4 3>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi0>;
+ clocks = <&periph 14>;
+ clock-names = "spi_clk";
status = "disabled";
};
@@ -656,6 +807,8 @@
interrupts = <15 4 3>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi1>;
+ clocks = <&periph 15>;
+ clock-names = "spi_clk";
status = "disabled";
};
};
@@ -682,6 +835,8 @@
compatible = "atmel,at91rm9200-ohci", "usb-ohci";
reg = <0x00700000 0x100000>;
interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
+ clocks = <&periph 22>, <&periph 22>, <&system 6>;
+ clock-names = "ohci_clk", "hclk", "uhpck";
status = "disabled";
};
@@ -689,6 +844,8 @@
compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
reg = <0x00800000 0x100000>;
interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
+ clocks = <&periph 22>, <&system 6>;
+ clock-names = "ehci_clk", "uhpck";
status = "disabled";
};
};
--
1.7.9.5
next prev parent reply other threads:[~2013-06-07 18:12 UTC|newest]
Thread overview: 66+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-06-07 14:24 [RESEND RFC PATCH 00/50] ARM: at91: move to common clk framework Boris BREZILLON
2013-06-07 14:24 ` [RFC PATCH 01/50] ARM: at91: move at91_pmc.h to include/linux/clk/at91.h Boris BREZILLON
2013-06-07 14:24 ` [RFC PATCH 02/50] ARM: at91: add PMC main clock Boris BREZILLON
2013-06-07 15:30 ` Thomas Petazzoni
2013-06-07 15:36 ` boris brezillon
2013-06-07 14:24 ` [RFC PATCH 03/50] ARM: at91: add PMC pll clocks Boris BREZILLON
2013-06-07 14:24 ` [RFC PATCH 04/50] ARM: at91: add PMC master clock Boris BREZILLON
2013-06-07 14:24 ` [RFC PATCH 05/50] ARM: at91: add PMC system clocks Boris BREZILLON
2013-06-07 14:24 ` [RFC PATCH 06/50] ARM: at91: add PMC peripheral clocks Boris BREZILLON
2013-06-07 14:24 ` [RFC PATCH 07/50] ARM: at91: add PMC programmable clocks Boris BREZILLON
2013-06-07 14:24 ` [RFC PATCH 08/50] ARM: at91: add PMC utmi clock Boris BREZILLON
2013-06-07 14:24 ` [RFC PATCH 09/50] ARM: at91: add PMC usb clock Boris BREZILLON
2013-06-07 14:24 ` [RFC PATCH 10/50] ARM: at91: add PMC smd clock Boris BREZILLON
2013-06-07 14:24 ` [RFC PATCH 11/50] ARM: at91: add PMC clk device tree binding doc Boris BREZILLON
2013-06-07 15:08 ` [RFC PATCH 12/50] ARM: at91: move to common clk framework Boris BREZILLON
2013-06-07 15:11 ` [RFC PATCH 13/50] ARM: at91: move at91rm9200 SoC to new at91 clk implem Boris BREZILLON
2013-06-20 6:52 ` Mike Turquette
2013-06-20 7:12 ` boris brezillon
2013-06-07 15:11 ` [RFC PATCH 14/50] ARM: at91: move at91sam9260 " Boris BREZILLON
2013-06-07 15:19 ` [RFC PATCH 15/50] ARM: at91: move at91sam9261 " Boris BREZILLON
2013-06-07 15:20 ` [RFC PATCH 16/50] ARM: at91: move at91sam9263 " Boris BREZILLON
2013-06-07 15:24 ` [RFC PATCH 17/50] ARM: at91: move at91sam9g45 " Boris BREZILLON
2013-06-07 15:25 ` [RFC PATCH 18/50] ARM: at91: move at91sam9n12 " Boris BREZILLON
2013-06-07 15:28 ` [RFC PATCH 19/50] ARM: at91: move at91sam9rl " Boris BREZILLON
2013-06-07 15:30 ` [RFC PATCH 20/50] ARM: at91: move at91sam9x5 SoCs " Boris BREZILLON
2013-06-07 15:36 ` [RFC PATCH 21/50] ARM: at91: move at91sam9 " Boris BREZILLON
2013-06-07 15:37 ` [RFC PATCH 22/50] ARM: at91: move sama5d3 " Boris BREZILLON
2013-06-07 15:42 ` [RFC PATCH 23/50] ARM: at91: move at91rm9200 boards " Boris BREZILLON
2013-06-07 16:23 ` [RFC PATCH 24/50] ARM: at91: move at91sam9 " Boris BREZILLON
2013-06-07 16:23 ` [RFC PATCH 25/50] ARM: at91: move pit timer to common clk framework Boris BREZILLON
2013-06-07 16:24 ` [RFC PATCH 26/50] ARM: at91/tc/clocksource: replace clk_enable/disable with clk_prepare_enable/disable_unprepare Boris BREZILLON
2013-06-07 16:25 ` [RFC PATCH 27/50] at_hdmac: prepare clk before calling enable Boris BREZILLON
2013-06-12 9:05 ` Vinod Koul
2013-06-12 12:08 ` boris brezillon
2013-06-07 16:26 ` [RFC PATCH 28/50] ASoC: atmel-ssc: " Boris BREZILLON
2013-06-07 16:55 ` Mark Brown
2013-06-07 19:56 ` Boris BREZILLON
2013-06-10 9:06 ` Mark Brown
2013-06-10 9:28 ` boris brezillon
2013-06-07 16:26 ` [RFC PATCH 29/50] mmc: atmel-mci: " Boris BREZILLON
2013-06-07 16:26 ` [RFC PATCH 30/50] pwm: atmel-tcb: " Boris BREZILLON
2013-06-12 10:52 ` Thierry Reding
2013-06-07 18:07 ` [RFC PATCH 31/50] tty: atmel_serial: " Boris BREZILLON
2013-06-07 18:08 ` [RFC PATCH 32/50] usb: gadget: at91_udc: " Boris BREZILLON
2013-06-12 15:06 ` Felipe Balbi
2013-06-07 18:08 ` [RFC PATCH 33/50] ehci-atmel.c: " Boris BREZILLON
2013-06-07 18:08 ` [RFC PATCH 34/50] USB: ohci-at91: " Boris BREZILLON
2013-06-07 18:08 ` [RFC PATCH 35/50] at91/avr32/atmel_lcdfb: " Boris BREZILLON
2013-06-07 18:09 ` [RFC PATCH 36/50] ARM: at91/dt: move at91rm9200 SoC to new at91 clk implem Boris BREZILLON
2013-06-07 18:09 ` [RFC PATCH 37/50] ARM: at91/dt: move at91sam9260 " Boris BREZILLON
2013-06-07 18:12 ` [RFC PATCH 38/50] ARM: at91/dt: move at91sam9263 " Boris BREZILLON
2013-06-07 18:12 ` Boris BREZILLON [this message]
2013-06-07 18:13 ` [RFC PATCH 40/50] ARM: at91/dt: move at91sam9n12 " Boris BREZILLON
2013-06-07 18:13 ` [RFC PATCH 41/50] ARM: at91/dt: move at91sam9x5 SoCs " Boris BREZILLON
2013-06-07 18:13 ` [RFC PATCH 42/50] ARM: at91/dt: move at91sam9g20 SoC " Boris BREZILLON
2013-06-07 18:14 ` [RFC PATCH 43/50] ARM: at91/dt: move sama5d3 SoCs " Boris BREZILLON
2013-06-07 18:14 ` [RFC PATCH 44/50] ARM: at91/dt: move sam9260/sam9g20 " Boris BREZILLON
2013-06-07 18:14 ` [RFC PATCH 45/50] ARM: at91/dt: move rm9200 boards " Boris BREZILLON
2013-06-07 19:33 ` [RFC PATCH 37/50] ARM: at91/dt: move at91sam9260 SoC " Boris BREZILLON
2013-06-07 19:41 ` [RFC PATCH 46/50] ARM: at91/dt: move sam9263 boards " Boris BREZILLON
2013-06-07 19:42 ` [RFC PATCH 47/50] ARM: at91/dt: move sam9g45 " Boris BREZILLON
2013-06-07 19:43 ` [RFC PATCH 48/50] ARM: at91/dt: move sam9n12 " Boris BREZILLON
2013-06-07 19:44 ` [RFC PATCH 49/50] ARM: at91/dt: move sam9x5 " Boris BREZILLON
2013-06-07 19:45 ` [RFC PATCH 50/50] ARM: at91/dt: move sama5d3 " Boris BREZILLON
2013-06-07 20:00 ` [RFC PATCH 45/50] ARM: at91/dt: move rm9200 " Boris BREZILLON
2013-06-07 20:03 ` [RFC PATCH 37/50] ARM: at91/dt: move at91sam9260 SoC " Boris BREZILLON
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1370628766-2882-1-git-send-email-b.brezillon@overkiz.com \
--to=b.brezillon@overkiz.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@arm.linux.org.uk \
--cc=mturquette@linaro.org \
--cc=nicolas.ferre@atmel.com \
--cc=plagnioj@jcrosoft.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®