[PATCH 2/5] i2c: omap: add runtime check in isr to be sure that i2c is enabled

[Grygorii Strashko <grygorii.strashko@ti.com>]

Add runtime check at the beginning of omap_i2c_isr/omap_i2c_isr_thread
to be sure that i2c is enabled, before performing IRQ handling and accessing
I2C IP registers:
	if (pm_runtime_suspended(dev->dev)) {
		WARN_ONCE(true, "We should never be here!\n");
		return IRQ_NONE;
	}

Produce warning in case if ISR called when i2c is disabled

CC: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
---
 drivers/i2c/busses/i2c-omap.c |   10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index 97844ff..2dac598 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -885,6 +885,11 @@ omap_i2c_isr(int irq, void *dev_id)
 	u16 stat;
 
 	spin_lock(&dev->lock);
+	if (pm_runtime_suspended(dev->dev)) {
+		WARN_ONCE(true, "We should never be here!\n");
+		return IRQ_NONE;
+	}
+
 	mask = omap_i2c_read_reg(dev, OMAP_I2C_IE_REG);
 	stat = omap_i2c_read_reg(dev, OMAP_I2C_STAT_REG);
 
@@ -905,6 +910,11 @@ omap_i2c_isr_thread(int this_irq, void *dev_id)
 	u16 stat;
 	int err = 0, count = 0;
 
+	if (pm_runtime_suspended(dev->dev)) {
+		WARN_ONCE(true, "We should never be here!\n");
+		return IRQ_NONE;
+	}
+
 	spin_lock_irqsave(&dev->lock, flags);
 	do {
 		bits = omap_i2c_read_reg(dev, OMAP_I2C_IE_REG);
-- 
1.7.9.5