[PATCH v2] clk: samsung: Fix pll36xx_recalc_rate to handle kdiv properly

[Doug Anderson <dianders@chromium.org>]

The KDIV value is often listed as unsigned but it needs to be treated
as a 16-bit signed value when using it in calculations.  Fix our rate
recalculation to do this correctly.

Before doing this, I tried setting EPLL on exynos5250 to:
  rate, m, p, s, k = 80000000, 107, 2, 4, 43691

This rate is exactly from the table in the exynos5250 user manual.

I read this back as 80750003 with:
  cat /sys/kernel/debug/clk/fin_pll/fout_epll/clk_rate

After this patch, it reads back as 80000003

Signed-off-by: Doug Anderson <dianders@chromium.org>
Acked-by: Kukjin Kim <kgene.kim@samsung.com>
Reviewed-by: Vikas Sajjan <vikas.sajjan@linaro.org>
---
Changes in v2:
- Rebased against mturquette/linux.git clk-fixes

 drivers/clk/samsung/clk-pll.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/clk/samsung/clk-pll.c b/drivers/clk/samsung/clk-pll.c
index 89135f6..362f12d 100644
--- a/drivers/clk/samsung/clk-pll.c
+++ b/drivers/clk/samsung/clk-pll.c
@@ -111,7 +111,8 @@ static unsigned long samsung_pll36xx_recalc_rate(struct clk_hw *hw,
 				unsigned long parent_rate)
 {
 	struct samsung_clk_pll36xx *pll = to_clk_pll36xx(hw);
-	u32 mdiv, pdiv, sdiv, kdiv, pll_con0, pll_con1;
+	u32 mdiv, pdiv, sdiv, pll_con0, pll_con1;
+	s16 kdiv;
 	u64 fvco = parent_rate;
 
 	pll_con0 = __raw_readl(pll->con_reg);
@@ -119,7 +120,7 @@ static unsigned long samsung_pll36xx_recalc_rate(struct clk_hw *hw,
 	mdiv = (pll_con0 >> PLL36XX_MDIV_SHIFT) & PLL36XX_MDIV_MASK;
 	pdiv = (pll_con0 >> PLL36XX_PDIV_SHIFT) & PLL36XX_PDIV_MASK;
 	sdiv = (pll_con0 >> PLL36XX_SDIV_SHIFT) & PLL36XX_SDIV_MASK;
-	kdiv = pll_con1 & PLL36XX_KDIV_MASK;
+	kdiv = (s16)(pll_con1 & PLL36XX_KDIV_MASK);
 
 	fvco *= (mdiv << 16) + kdiv;
 	do_div(fvco, (pdiv << sdiv));
-- 
1.8.3