mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Yinghai Lu <yinghai@kernel.org>
To: "H. Peter Anvin" <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>, Ingo Molnar <mingo@elte.hu>,
	Andrew Morton <akpm@linux-foundation.org>,
	Tejun Heo <tj@kernel.org>, Thomas Renninger <trenn@suse.de>,
	Tang Chen <tangchen@cn.fujitsu.com>,
	linux-kernel@vger.kernel.org, Yinghai Lu <yinghai@kernel.org>
Subject: [PATCH v5 10/22] x86, mm, numa: Move two functions calling on successful path later
Date: Fri, 14 Jun 2013 17:56:28 -0700	[thread overview]
Message-ID: <1371257800-11720-11-git-send-email-yinghai@kernel.org> (raw)
In-Reply-To: <1371257800-11720-1-git-send-email-yinghai@kernel.org>

We need to have numa info ready before init_mem_mapping, so we
can call init_mem_mapping per nodes also can trim node mem range to
big alignment.

Current numa parsing need to allocate some buffer and need to be
called after init_mem_mapping.

So try to split parsing numa info to two stages, and early one will be
before init_mem_mapping, and it should not need allocate buffers.

At last we will have early_initmem_init() and initmem_init().

This one is first one for separation.

setup_node_data() and numa_init_array() are only called for successful
path, so we can move calling to x86_numa_init(). That will also make
numa_init() small and readable.

-v2: remove online_node_map clear in numa_init(), as it is only
     set in setup_node_data() at last in successful path.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Reviewed-by: Tang Chen <tangchen@cn.fujitsu.com>
Tested-by: Tang Chen <tangchen@cn.fujitsu.com>
---
 arch/x86/mm/numa.c | 69 ++++++++++++++++++++++++++++++------------------------
 1 file changed, 39 insertions(+), 30 deletions(-)

diff --git a/arch/x86/mm/numa.c b/arch/x86/mm/numa.c
index a71c4e2..07ae800 100644
--- a/arch/x86/mm/numa.c
+++ b/arch/x86/mm/numa.c
@@ -477,7 +477,7 @@ static bool __init numa_meminfo_cover_memory(const struct numa_meminfo *mi)
 static int __init numa_register_memblks(struct numa_meminfo *mi)
 {
 	unsigned long uninitialized_var(pfn_align);
-	int i, nid;
+	int i;
 
 	/* Account for nodes with cpus and no memory */
 	node_possible_map = numa_nodes_parsed;
@@ -506,24 +506,6 @@ static int __init numa_register_memblks(struct numa_meminfo *mi)
 	if (!numa_meminfo_cover_memory(mi))
 		return -EINVAL;
 
-	/* Finally register nodes. */
-	for_each_node_mask(nid, node_possible_map) {
-		u64 start = PFN_PHYS(max_pfn);
-		u64 end = 0;
-
-		for (i = 0; i < mi->nr_blks; i++) {
-			if (nid != mi->blk[i].nid)
-				continue;
-			start = min(mi->blk[i].start, start);
-			end = max(mi->blk[i].end, end);
-		}
-
-		if (start < end)
-			setup_node_data(nid, start, end);
-	}
-
-	/* Dump memblock with node info and return. */
-	memblock_dump_all();
 	return 0;
 }
 
@@ -559,7 +541,6 @@ static int __init numa_init(int (*init_func)(void))
 
 	nodes_clear(numa_nodes_parsed);
 	nodes_clear(node_possible_map);
-	nodes_clear(node_online_map);
 	memset(&numa_meminfo, 0, sizeof(numa_meminfo));
 	WARN_ON(memblock_set_node(0, ULLONG_MAX, MAX_NUMNODES));
 	numa_reset_distance();
@@ -577,15 +558,6 @@ static int __init numa_init(int (*init_func)(void))
 	if (ret < 0)
 		return ret;
 
-	for (i = 0; i < nr_cpu_ids; i++) {
-		int nid = early_cpu_to_node(i);
-
-		if (nid == NUMA_NO_NODE)
-			continue;
-		if (!node_online(nid))
-			numa_clear_node(i);
-	}
-	numa_init_array();
 	return 0;
 }
 
@@ -618,7 +590,7 @@ static int __init dummy_numa_init(void)
  * last fallback is dummy single node config encomapssing whole memory and
  * never fails.
  */
-void __init x86_numa_init(void)
+static void __init early_x86_numa_init(void)
 {
 	if (!numa_off) {
 #ifdef CONFIG_X86_NUMAQ
@@ -638,6 +610,43 @@ void __init x86_numa_init(void)
 	numa_init(dummy_numa_init);
 }
 
+void __init x86_numa_init(void)
+{
+	int i, nid;
+	struct numa_meminfo *mi = &numa_meminfo;
+
+	early_x86_numa_init();
+
+	/* Finally register nodes. */
+	for_each_node_mask(nid, node_possible_map) {
+		u64 start = PFN_PHYS(max_pfn);
+		u64 end = 0;
+
+		for (i = 0; i < mi->nr_blks; i++) {
+			if (nid != mi->blk[i].nid)
+				continue;
+			start = min(mi->blk[i].start, start);
+			end = max(mi->blk[i].end, end);
+		}
+
+		if (start < end)
+			setup_node_data(nid, start, end); /* online is set */
+	}
+
+	/* Dump memblock with node info */
+	memblock_dump_all();
+
+	for (i = 0; i < nr_cpu_ids; i++) {
+		int nid = early_cpu_to_node(i);
+
+		if (nid == NUMA_NO_NODE)
+			continue;
+		if (!node_online(nid))
+			numa_clear_node(i);
+	}
+	numa_init_array();
+}
+
 static __init int find_near_online_node(int node)
 {
 	int n, val;
-- 
1.8.1.4


  parent reply	other threads:[~2013-06-15  0:57 UTC|newest]

Thread overview: 31+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-06-15  0:56 [PATCH v5 00/22] x86, ACPI, numa: Parse numa info early Yinghai Lu
2013-06-15  0:56 ` [PATCH v5 01/22] x86: Change get_ramdisk_image() to global Yinghai Lu
2013-06-15  0:56 ` [PATCH v5 02/22] x86, microcode: Use common get_ramdisk_image() Yinghai Lu
2013-06-15  0:56 ` [PATCH v5 03/22] x86, ACPI, mm: Kill max_low_pfn_mapped Yinghai Lu
2013-06-17 23:19   ` Toshi Kani
2013-06-17 23:36     ` Yinghai Lu
2013-06-17 23:55       ` Toshi Kani
2013-06-15  0:56 ` [PATCH v5 04/22] x86, ACPI: Search buffer above 4G in second try for acpi override tables Yinghai Lu
2013-06-17 23:22   ` Toshi Kani
2013-06-17 23:38     ` Yinghai Lu
2013-06-17 23:56       ` Toshi Kani
2013-06-15  0:56 ` [PATCH v5 05/22] x86, ACPI: Increase override tables number limit Yinghai Lu
2013-06-17 23:35   ` Toshi Kani
2013-06-15  0:56 ` [PATCH v5 06/22] x86, ACPI: Split acpi_initrd_override to find/copy two functions Yinghai Lu
2013-06-18  0:24   ` Toshi Kani
2013-06-15  0:56 ` [PATCH v5 07/22] x86, ACPI: Store override acpi tables phys addr in cpio files info array Yinghai Lu
2013-06-15  0:56 ` [PATCH v5 08/22] x86, ACPI: Make acpi_initrd_override_find work with 32bit flat mode Yinghai Lu
2013-06-15  0:56 ` [PATCH v5 09/22] x86, ACPI: Find acpi tables in initrd early from head_32.S/head64.c Yinghai Lu
2013-06-15  0:56 ` Yinghai Lu [this message]
2013-06-15  0:56 ` [PATCH v5 11/22] x86, mm, numa: Call numa_meminfo_cover_memory() checking early Yinghai Lu
2013-06-15  0:56 ` [PATCH v5 12/22] x86, mm, numa: Move node_map_pfn alignment() to x86 Yinghai Lu
2013-06-15  0:56 ` [PATCH v5 13/22] x86, mm, numa: Use numa_meminfo to check node_map_pfn alignment Yinghai Lu
2013-06-15  0:56 ` [PATCH v5 14/22] x86, mm, numa: Set memblock nid later Yinghai Lu
2013-06-15  0:56 ` [PATCH v5 15/22] x86, mm, numa: Move node_possible_map setting later Yinghai Lu
2013-06-15  0:56 ` [PATCH v5 16/22] x86, mm, numa: Move emulation handling down Yinghai Lu
2013-06-15  0:56 ` [PATCH v5 17/22] x86, ACPI, numa, ia64: split SLIT handling out Yinghai Lu
2013-06-15  0:56 ` [PATCH v5 18/22] x86, mm, numa: Add early_initmem_init() stub Yinghai Lu
2013-06-15  0:56 ` [PATCH v5 19/22] x86, mm: Parse numa info early Yinghai Lu
2013-06-15  0:56 ` [PATCH v5 20/22] x86, mm: Add comments for step_size shift Yinghai Lu
2013-06-15  0:56 ` [PATCH v5 21/22] x86, mm: Make init_mem_mapping be able to be called several times Yinghai Lu
2013-06-15  0:56 ` [PATCH v5 22/22] x86, mm, numa: Put pagetable on local node ram for 64bit Yinghai Lu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1371257800-11720-11-git-send-email-yinghai@kernel.org \
    --to=yinghai@kernel.org \
    --cc=akpm@linux-foundation.org \
    --cc=hpa@zytor.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mingo@elte.hu \
    --cc=tangchen@cn.fujitsu.com \
    --cc=tglx@linutronix.de \
    --cc=tj@kernel.org \
    --cc=trenn@suse.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

Powered by JetHome