From: Chad Williamson <chad@dahc.us>
To: gregkh@linuxfoundation.org
Cc: puff65537@bansheeslibrary.com, viro@zeniv.linux.org.uk,
tulinizer@gmail.com, devel@driverdev.osuosl.org,
linux-kernel@vger.kernel.org, Chad Williamson <chad@dahc.us>
Subject: [PATCH 4/4] Staging: silicom: move more assignments out of if conditions
Date: Mon, 17 Jun 2013 22:32:05 -0500 [thread overview]
Message-ID: <1371526325-9821-5-git-send-email-chad@dahc.us> (raw)
In-Reply-To: <1371526325-9821-1-git-send-email-chad@dahc.us>
Remove more assignments from if-statement conditions in bpctl_mod.c,
resolving checkpatch.pl errors. Those that remain need more attention
than I'm presently prepared to give them.
Signed-off-by: Chad Williamson <chad@dahc.us>
---
drivers/staging/silicom/bpctl_mod.c | 53 ++++++++++++++++++++++++-------------
1 file changed, 34 insertions(+), 19 deletions(-)
diff --git a/drivers/staging/silicom/bpctl_mod.c b/drivers/staging/silicom/bpctl_mod.c
index 19a9239..91a6afd 100644
--- a/drivers/staging/silicom/bpctl_mod.c
+++ b/drivers/staging/silicom/bpctl_mod.c
@@ -4222,9 +4222,8 @@ void bypass_caps_init(bpctl_dev_t *pbpctl_dev)
int bypass_off_init(bpctl_dev_t *pbpctl_dev)
{
- int ret = 0;
-
- if ((ret = cmnd_on(pbpctl_dev)) < 0)
+ int ret = cmnd_on(pbpctl_dev);
+ if (ret < 0)
return ret;
if (INTEL_IF_SERIES(pbpctl_dev->subdevice))
return dis_bypass_cap(pbpctl_dev);
@@ -4409,7 +4408,8 @@ int set_bypass_fn(bpctl_dev_t *pbpctl_dev, int bypass_mode)
if (!(pbpctl_dev->bp_caps & BP_CAP))
return BP_NOT_CAP;
- if ((ret = cmnd_on(pbpctl_dev)) < 0)
+ ret = cmnd_on(pbpctl_dev);
+ if (ret < 0)
return ret;
if (!bypass_mode)
ret = bypass_off(pbpctl_dev);
@@ -4441,7 +4441,8 @@ int set_dis_bypass_fn(bpctl_dev_t *pbpctl_dev, int dis_param)
if (!(pbpctl_dev->bp_caps & BP_DIS_CAP))
return BP_NOT_CAP;
- if ((ret = cmnd_on(pbpctl_dev)) < 0)
+ ret = cmnd_on(pbpctl_dev);
+ if (ret < 0)
return ret;
if (dis_param)
ret = dis_bypass_cap(pbpctl_dev);
@@ -4467,7 +4468,8 @@ int set_bypass_pwoff_fn(bpctl_dev_t *pbpctl_dev, int bypass_mode)
if (!(pbpctl_dev->bp_caps & BP_PWOFF_CTL_CAP))
return BP_NOT_CAP;
- if ((ret = cmnd_on(pbpctl_dev)) < 0)
+ ret = cmnd_on(pbpctl_dev);
+ if (ret < 0)
return ret;
if (bypass_mode)
ret = bypass_state_pwroff(pbpctl_dev);
@@ -4493,7 +4495,8 @@ int set_bypass_pwup_fn(bpctl_dev_t *pbpctl_dev, int bypass_mode)
if (!(pbpctl_dev->bp_caps & BP_PWUP_CTL_CAP))
return BP_NOT_CAP;
- if ((ret = cmnd_on(pbpctl_dev)) < 0)
+ ret = cmnd_on(pbpctl_dev);
+ if (ret < 0)
return ret;
if (bypass_mode)
ret = bypass_state_pwron(pbpctl_dev);
@@ -4520,7 +4523,8 @@ int set_bypass_wd_fn(bpctl_dev_t *pbpctl_dev, int timeout)
if (!(pbpctl_dev->bp_caps & WD_CTL_CAP))
return BP_NOT_CAP;
- if ((ret = cmnd_on(pbpctl_dev)) < 0)
+ ret = cmnd_on(pbpctl_dev);
+ if (ret < 0)
return ret;
if (!timeout)
ret = wdt_off(pbpctl_dev);
@@ -4589,7 +4593,8 @@ int set_std_nic_fn(bpctl_dev_t *pbpctl_dev, int nic_mode)
if (!(pbpctl_dev->bp_caps & STD_NIC_CAP))
return BP_NOT_CAP;
- if ((ret = cmnd_on(pbpctl_dev)) < 0)
+ ret = cmnd_on(pbpctl_dev);
+ if (ret < 0)
return ret;
if (nic_mode)
ret = std_nic_on(pbpctl_dev);
@@ -4655,7 +4660,8 @@ int get_tap_pwup_fn(bpctl_dev_t *pbpctl_dev)
if (!pbpctl_dev)
return -1;
- if ((ret = default_pwron_tap_status(pbpctl_dev)) < 0)
+ ret = default_pwron_tap_status(pbpctl_dev);
+ if (ret < 0)
return ret;
return ((ret == 0) ? 1 : 0);
}
@@ -4830,7 +4836,8 @@ int get_disc_port_pwup_fn(bpctl_dev_t *pbpctl_dev)
if (!pbpctl_dev)
return -1;
- if ((ret = default_pwron_disc_port_status(pbpctl_dev)) < 0)
+ ret = default_pwron_disc_port_status(pbpctl_dev);
+ if (ret < 0)
return ret;
return ((ret == 0) ? 1 : 0);
}
@@ -4857,7 +4864,8 @@ int reset_cont_fn(bpctl_dev_t *pbpctl_dev)
if (!pbpctl_dev)
return -1;
- if ((ret = cmnd_on(pbpctl_dev)) < 0)
+ ret = cmnd_on(pbpctl_dev);
+ if (ret < 0)
return ret;
return reset_cont(pbpctl_dev);
}
@@ -4873,8 +4881,10 @@ int set_tx_fn(bpctl_dev_t *pbpctl_dev, int tx_state)
(pbpctl_dev->bp_caps & SW_CTL_CAP)) {
if ((pbpctl_dev->bp_tpl_flag))
return BP_NOT_CAP;
- } else if ((pbpctl_dev_b = get_master_port_fn(pbpctl_dev))) {
- if ((pbpctl_dev_b->bp_caps & TPL_CAP) &&
+ } else {
+ pbpctl_dev_b = get_master_port_fn(pbpctl_dev);
+ if (pbpctl_dev_b &&
+ (pbpctl_dev_b->bp_caps & TPL_CAP) &&
(pbpctl_dev_b->bp_tpl_flag))
return BP_NOT_CAP;
}
@@ -4990,8 +5000,10 @@ int get_tx_fn(bpctl_dev_t *pbpctl_dev)
(pbpctl_dev->bp_caps & SW_CTL_CAP)) {
if ((pbpctl_dev->bp_tpl_flag))
return BP_NOT_CAP;
- } else if ((pbpctl_dev_b = get_master_port_fn(pbpctl_dev))) {
- if ((pbpctl_dev_b->bp_caps & TPL_CAP) &&
+ } else {
+ pbpctl_dev_b = get_master_port_fn(pbpctl_dev);
+ if (pbpctl_dev_b &&
+ (pbpctl_dev_b->bp_caps & TPL_CAP) &&
(pbpctl_dev_b->bp_tpl_flag))
return BP_NOT_CAP;
}
@@ -5030,7 +5042,8 @@ static void bp_tpl_timer_fn(unsigned long param)
uint32_t link1, link2;
bpctl_dev_t *pbpctl_dev_b = NULL;
- if (!(pbpctl_dev_b = get_status_port_fn(pbpctl_dev)))
+ pbpctl_dev_b = get_status_port_fn(pbpctl_dev);
+ if (!pbpctl_dev_b)
return;
if (!pbpctl_dev->bp_tpl_flag) {
@@ -5130,7 +5143,8 @@ int set_tpl_fn(bpctl_dev_t *pbpctl_dev, int tpl_mode)
if (pbpctl_dev->bp_caps & TPL_CAP) {
if (tpl_mode) {
- if ((pbpctl_dev_b = get_status_port_fn(pbpctl_dev)))
+ pbpctl_dev_b = get_status_port_fn(pbpctl_dev);
+ if (pbpctl_dev_b)
set_tx(pbpctl_dev_b, 1);
set_tx(pbpctl_dev, 1);
}
@@ -6710,7 +6724,8 @@ static int init_one(bpctl_dev_t *dev, bpmod_info_t *info, struct pci_dev *pdev1)
reset_cont(dev);
}
#ifdef BP_SELF_TEST
- if ((dev->bp_tx_data = kzalloc(BPTEST_DATA_LEN, GFP_KERNEL))) {
+ dev->bp_tx_data = kzalloc(BPTEST_DATA_LEN, GFP_KERNEL);
+ if (dev->bp_tx_data) {
memset(dev->bp_tx_data, 0xff, 6);
memset(dev->bp_tx_data + 6, 0x0, 1);
memset(dev->bp_tx_data + 7, 0xaa, 5);
--
1.8.1.4
next prev parent reply other threads:[~2013-06-18 3:32 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-06-18 3:32 [PATCH 0/4] Staging: silicom: coding style cleanup Chad Williamson
2013-06-18 3:32 ` [PATCH 1/4] Staging: silicom: remove unnecessary braces in bpctl_mod.c Chad Williamson
2013-06-18 3:32 ` [PATCH 2/4] Staging: silicom: whitespace fixes " Chad Williamson
2013-06-18 18:40 ` Greg KH
2013-06-18 3:32 ` [PATCH 3/4] Staging: silicom: move assignments out of if conditions Chad Williamson
2013-06-18 3:32 ` Chad Williamson [this message]
[not found] ` <CAP5fS0Q+1B3L1i2HH0=2p8NRvdhwJGE=U8yjjo2QnZBuaaES3w@mail.gmail.com>
2013-06-18 18:42 ` [PATCH 0/4] Staging: silicom: coding style cleanup Greg KH
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1371526325-9821-5-git-send-email-chad@dahc.us \
--to=chad@dahc.us \
--cc=devel@driverdev.osuosl.org \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=puff65537@bansheeslibrary.com \
--cc=tulinizer@gmail.com \
--cc=viro@zeniv.linux.org.uk \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®