mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Xiang Wang <wangxfdu@gmail.com>
To: Dan Williams <djbw@fb.com>, Vinod Koul <vinod.koul@intel.com>,
	<linux-kernel@vger.kernel.org>
Cc: <wangxfdu@gmail.com>, <cxie4@marvell.com>,
	Xiang Wang <wangx@marvell.com>
Subject: [PATCH V2] dma: mmp_pdma: support for getting residual bytes
Date: Tue, 18 Jun 2013 16:41:20 +0800	[thread overview]
Message-ID: <1371544880-26782-1-git-send-email-wangxfdu@gmail.com> (raw)

From: Xiang Wang <wangx@marvell.com>

In some of our drivers (e.g. UART) we may stop a running DMA
before it finishes. So we need APIs to know how many bytes
have been transferred.

Signed-off-by: Xiang Wang <wangx@marvell.com>
---
 drivers/dma/mmp_pdma.c |   88 +++++++++++++++++++++++++++++++++++++++++++----
 1 files changed, 80 insertions(+), 8 deletions(-)

diff --git a/drivers/dma/mmp_pdma.c b/drivers/dma/mmp_pdma.c
index c26699f..57cd047 100644
--- a/drivers/dma/mmp_pdma.c
+++ b/drivers/dma/mmp_pdma.c
@@ -104,7 +104,8 @@ struct mmp_pdma_chan {
 	spinlock_t desc_lock;		/* Descriptor list lock */
 	struct list_head chain_pending;	/* Link descriptors queue for pending */
 	struct list_head chain_running;	/* Link descriptors queue for running */
-	bool idle;			/* channel statue machine */
+	enum dma_status status; /* channel status machine */
+	u32 bytes_residue;
 
 	struct dma_pool *desc_pool;	/* Descriptors pool */
 };
@@ -270,7 +271,7 @@ static void start_pending_queue(struct mmp_pdma_chan *chan)
 	struct mmp_pdma_desc_sw *desc;
 
 	/* still in running, irq will start the pending list */
-	if (!chan->idle) {
+	if (chan->status == DMA_IN_PROGRESS) {
 		dev_dbg(chan->dev, "DMA controller still busy\n");
 		return;
 	}
@@ -307,7 +308,64 @@ static void start_pending_queue(struct mmp_pdma_chan *chan)
 	 */
 	set_desc(chan->phy, desc->async_tx.phys);
 	enable_chan(chan->phy);
-	chan->idle = false;
+	chan->status = DMA_IN_PROGRESS;
+	chan->bytes_residue = 0;
+}
+
+/*
+ * Get the number of pending bytes. Should be called with desc_lock held
+ * because we are accessing desc list.
+ */
+static u32 mmp_pdma_get_bytes_residue(struct mmp_pdma_chan *chan)
+{
+	u32 reg, orig_pos, cur_pos, ddadr, residue = 0;
+	bool running_desc_found = false;
+	struct mmp_pdma_desc_sw *desc_sw;
+
+	/*
+	 * When a phy channel is unavailable, maybe it has been freed, return
+	 * last stored value for safe.
+	 */
+	if (!chan->phy)
+		return chan->bytes_residue;
+
+	reg = (chan->phy->idx << 4) + DDADR;
+	ddadr = readl_relaxed(chan->phy->base + reg);
+
+	/* iterate over all descriptors to sum up the number of pending bytes */
+	list_for_each_entry(desc_sw, &chan->chain_running, node) {
+		/* for the case of a running descriptor */
+		if (desc_sw->desc.ddadr == ddadr && !running_desc_found) {
+			switch (chan->dir) {
+			case DMA_DEV_TO_MEM:
+			case DMA_MEM_TO_MEM:
+				reg = (chan->phy->idx << 4) + DTADR;
+				cur_pos = readl_relaxed(chan->phy->base + reg);
+				orig_pos = desc_sw->desc.dtadr;
+				break;
+
+			case DMA_MEM_TO_DEV:
+				reg = (chan->phy->idx << 4) + DSADR;
+				cur_pos = readl_relaxed(chan->phy->base + reg);
+				orig_pos = desc_sw->desc.dsadr;
+				break;
+
+			default:
+				cur_pos = 0;
+				orig_pos = 0;
+			}
+			residue = (u32)(desc_sw->desc.dcmd & DCMD_LENGTH)
+					+ orig_pos - cur_pos;
+			running_desc_found = true;
+			continue;
+		}
+
+		/* for the case of following un-started descriptors*/
+		if (running_desc_found)
+			residue += (u32)(desc_sw->desc.dcmd & DCMD_LENGTH);
+	}
+
+	return residue;
 }
 
 
@@ -381,7 +439,7 @@ static int mmp_pdma_alloc_chan_resources(struct dma_chan *dchan)
 		chan->phy->vchan = NULL;
 		chan->phy = NULL;
 	}
-	chan->idle = true;
+	chan->status = DMA_SUCCESS;
 	chan->dev_addr = 0;
 	return 1;
 }
@@ -409,7 +467,7 @@ static void mmp_pdma_free_chan_resources(struct dma_chan *dchan)
 
 	dma_pool_destroy(chan->desc_pool);
 	chan->desc_pool = NULL;
-	chan->idle = true;
+	chan->status = DMA_SUCCESS;
 	chan->dev_addr = 0;
 	if (chan->phy) {
 		chan->phy->vchan = NULL;
@@ -588,9 +646,16 @@ static int mmp_pdma_control(struct dma_chan *dchan, enum dma_ctrl_cmd cmd,
 		spin_lock_irqsave(&chan->desc_lock, flags);
 		mmp_pdma_free_desc_list(chan, &chan->chain_pending);
 		mmp_pdma_free_desc_list(chan, &chan->chain_running);
+		chan->bytes_residue = 0;
 		spin_unlock_irqrestore(&chan->desc_lock, flags);
-		chan->idle = true;
+		chan->status = DMA_SUCCESS;
 		break;
+
+	case DMA_PAUSE:
+		disable_chan(chan->phy);
+		chan->status = DMA_PAUSED;
+		break;
+
 	case DMA_SLAVE_CONFIG:
 		if (cfg->direction == DMA_DEV_TO_MEM) {
 			chan->dcmd = DCMD_INCTRGADDR | DCMD_FLOWSRC;
@@ -637,7 +702,9 @@ static enum dma_status mmp_pdma_tx_status(struct dma_chan *dchan,
 	unsigned long flags;
 
 	spin_lock_irqsave(&chan->desc_lock, flags);
-	ret = dma_cookie_status(dchan, cookie, txstate);
+	chan->bytes_residue = mmp_pdma_get_bytes_residue(chan);
+	dma_set_residue(txstate, chan->bytes_residue);
+	ret = chan->status;
 	spin_unlock_irqrestore(&chan->desc_lock, flags);
 
 	return ret;
@@ -684,6 +751,8 @@ static void dma_do_tasklet(unsigned long data)
 		dev_dbg(chan->dev, "completed_cookie=%d\n", cookie);
 	}
 
+	/* update bytes_residue so that the user can query later on */
+	chan->bytes_residue = mmp_pdma_get_bytes_residue(chan);
 	/*
 	 * move the descriptors to a temporary list so we can drop the lock
 	 * during the entire cleanup operation
@@ -691,7 +760,7 @@ static void dma_do_tasklet(unsigned long data)
 	list_splice_tail_init(&chan->chain_running, &chain_cleanup);
 
 	/* the hardware is now idle and ready for more */
-	chan->idle = true;
+	chan->status = DMA_SUCCESS;
 
 	/* Start any pending transactions automatically */
 	start_pending_queue(chan);
@@ -750,6 +819,9 @@ static int mmp_pdma_chan_init(struct mmp_pdma_device *pdev,
 	INIT_LIST_HEAD(&chan->chain_pending);
 	INIT_LIST_HEAD(&chan->chain_running);
 
+	chan->status = DMA_SUCCESS;
+	chan->bytes_residue = 0;
+
 	/* register virt channel to dma engine */
 	list_add_tail(&chan->chan.device_node,
 			&pdev->device.channels);
-- 
1.7.5.4


             reply	other threads:[~2013-06-18  8:46 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-06-18  8:41 Xiang Wang [this message]
2013-07-03 12:14 ` Xiang Wang
2013-07-05  6:44 ` Vinod Koul
2013-07-11  2:54   ` Xiang Wang
2013-07-29  5:23     ` Vinod Koul

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1371544880-26782-1-git-send-email-wangxfdu@gmail.com \
    --to=wangxfdu@gmail.com \
    --cc=cxie4@marvell.com \
    --cc=djbw@fb.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=vinod.koul@intel.com \
    --cc=wangx@marvell.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

Powered by JetHome