From: J Keerthy <j-keerthy@ti.com>
To: <linux-omap@vger.kernel.org>
Cc: <broonie@kernel.org>, <j-keerthy@ti.com>, <ldewangan@nvidia.com>,
<sameo@linux.intel.com>, <grant.likely@secretlab.ca>,
<swarren@nvidia.com>, <linux-kernel@vger.kernel.org>,
<linux-doc@vger.kernel.org>, <gg@slimlogic.co.uk>
Subject: [PATCH v2 2/4] MFD: Palmas: Add SMPS10_BOOST feature
Date: Tue, 18 Jun 2013 15:33:14 +0530 [thread overview]
Message-ID: <1371549794-7406-1-git-send-email-j-keerthy@ti.com> (raw)
The SMPS10 regulator is not presesnt in all the variants
of the PALMAS PMIC family. Hence adding a feature to distingush
between them.
Signed-off-by: J Keerthy <j-keerthy@ti.com>
---
drivers/mfd/palmas.c | 28 +++++++++++++++++++++-------
drivers/regulator/palmas-regulator.c | 3 +++
include/linux/mfd/palmas.h | 14 ++++++++++++++
3 files changed, 38 insertions(+), 7 deletions(-)
diff --git a/drivers/mfd/palmas.c b/drivers/mfd/palmas.c
index 69c4e62..f9630b1 100644
--- a/drivers/mfd/palmas.c
+++ b/drivers/mfd/palmas.c
@@ -231,6 +231,16 @@ static void palmas_dt_to_pdata(struct i2c_client *i2c,
palmas_set_pdata_irq_flag(i2c, pdata);
}
+static unsigned int palmas_features = PALMAS_PMIC_FEATURE_SMPS10_BOOST;
+
+static const struct of_device_id of_palmas_match_tbl[] = {
+ {
+ .compatible = "ti,palmas",
+ .data = &palmas_features,
+ },
+ { },
+};
+
static int palmas_i2c_probe(struct i2c_client *i2c,
const struct i2c_device_id *id)
{
@@ -239,8 +249,9 @@ static int palmas_i2c_probe(struct i2c_client *i2c,
struct device_node *regnode = NULL;
struct device_node *node = i2c->dev.of_node;
int ret = 0, i;
- unsigned int reg, addr;
+ unsigned int reg, addr, *features;
int slave;
+ const struct of_device_id *match;
pdata = dev_get_platdata(&i2c->dev);
@@ -262,7 +273,15 @@ static int palmas_i2c_probe(struct i2c_client *i2c,
i2c_set_clientdata(i2c, palmas);
palmas->dev = &i2c->dev;
- palmas->id = id->driver_data;
+
+ match = of_match_device(of_match_ptr(of_palmas_match_tbl), &i2c->dev);
+
+ if (match) {
+ features = (unsigned int *)match->data;
+ palmas->features = *features;
+ } else {
+ return -ENODATA;
+ }
for (i = 0; i < PALMAS_NUM_CLIENTS; i++) {
if (i == 0)
@@ -437,11 +456,6 @@ static const struct i2c_device_id palmas_i2c_id[] = {
};
MODULE_DEVICE_TABLE(i2c, palmas_i2c_id);
-static struct of_device_id of_palmas_match_tbl[] = {
- { .compatible = "ti,palmas", },
- { /* end */ }
-};
-
static struct i2c_driver palmas_i2c_driver = {
.driver = {
.name = "palmas",
diff --git a/drivers/regulator/palmas-regulator.c b/drivers/regulator/palmas-regulator.c
index 3ae44ac..1ae1e83 100644
--- a/drivers/regulator/palmas-regulator.c
+++ b/drivers/regulator/palmas-regulator.c
@@ -838,6 +838,9 @@ static int palmas_regulators_probe(struct platform_device *pdev)
continue;
ramp_delay_support = true;
break;
+ case PALMAS_REG_SMPS10:
+ if (!PALMAS_PMIC_HAS(palmas, SMPS10_BOOST))
+ continue;
}
if ((id == PALMAS_REG_SMPS6) || (id == PALMAS_REG_SMPS8))
diff --git a/include/linux/mfd/palmas.h b/include/linux/mfd/palmas.h
index 8f21daf..98058ca 100644
--- a/include/linux/mfd/palmas.h
+++ b/include/linux/mfd/palmas.h
@@ -32,6 +32,19 @@
((a) == PALMAS_CHIP_ID))
#define is_palmas_charger(a) ((a) == PALMAS_CHIP_CHARGER_ID)
+/**
+ * Palmas PMIC feature types
+ *
+ * PALMAS_PMIC_FEATURE_SMPS10_BOOST - used when the PMIC provides SMPS10_BOOST
+ * regulator.
+ *
+ * PALMAS_PMIC_HAS(b, f) - macro to check if a bandgap device is capable of a
+ * specific feature (above) or not. Return non-zero, if yes.
+ */
+#define PALMAS_PMIC_FEATURE_SMPS10_BOOST BIT(0)
+#define PALMAS_PMIC_HAS(b, f) \
+ ((b)->features & PALMAS_PMIC_FEATURE_ ## f)
+
struct palmas_pmic;
struct palmas_gpadc;
struct palmas_resource;
@@ -46,6 +59,7 @@ struct palmas {
/* Stored chip id */
int id;
+ unsigned int features;
/* IRQ Data */
int irq;
u32 irq_mask;
--
1.7.5.4
next reply other threads:[~2013-06-18 10:14 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-06-18 10:03 J Keerthy [this message]
2013-06-18 15:53 ` Stephen Warren
2013-06-18 16:56 ` J, KEERTHY
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1371549794-7406-1-git-send-email-j-keerthy@ti.com \
--to=j-keerthy@ti.com \
--cc=broonie@kernel.org \
--cc=gg@slimlogic.co.uk \
--cc=grant.likely@secretlab.ca \
--cc=ldewangan@nvidia.com \
--cc=linux-doc@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=sameo@linux.intel.com \
--cc=swarren@nvidia.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®