From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S932930Ab3FRQG3 (ORCPT ); Tue, 18 Jun 2013 12:06:29 -0400 Received: from devils.ext.ti.com ([198.47.26.153]:46959 "EHLO devils.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S932246Ab3FRQFS (ORCPT ); Tue, 18 Jun 2013 12:05:18 -0400 From: Roger Quadros To: , CC: , , , , Roger Quadros Subject: [PATCH v2 1/4] ARM: dts: omap4-panda: Add USB Host support Date: Tue, 18 Jun 2013 19:04:44 +0300 Message-ID: <1371571487-14389-2-git-send-email-rogerq@ti.com> X-Mailer: git-send-email 1.7.4.1 In-Reply-To: <1371571487-14389-1-git-send-email-rogerq@ti.com> References: <1371571487-14389-1-git-send-email-rogerq@ti.com> MIME-Version: 1.0 Content-Type: text/plain Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Provide the RESET and Power regulators for the USB PHY, the USB Host port mode and the PHY device. Also provide pin multiplexer information for the USB host pins. Signed-off-by: Roger Quadros --- arch/arm/boot/dts/omap4-panda-common.dtsi | 62 +++++++++++++++++++++++++++++ 1 files changed, 62 insertions(+), 0 deletions(-) diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi index 00cbaa5..7a21e8e 100644 --- a/arch/arm/boot/dts/omap4-panda-common.dtsi +++ b/arch/arm/boot/dts/omap4-panda-common.dtsi @@ -59,6 +59,42 @@ "AFML", "Line In", "AFMR", "Line In"; }; + + /* HS USB Port 1 RESET */ + hsusb1_reset: hsusb1_reset_reg { + compatible = "regulator-fixed"; + regulator-name = "hsusb1_reset"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio2 30 0>; /* gpio_62 */ + startup-delay-us = <70000>; + enable-active-high; + }; + + /* HS USB Port 1 Power */ + hsusb1_power: hsusb1_power_reg { + compatible = "regulator-fixed"; + regulator-name = "hsusb1_vbus"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio1 1 0>; /* gpio_1 */ + startup-delay-us = <70000>; + enable-active-high; + }; + + /* HS USB Host PHY on PORT 1 */ + hsusb1_phy: hsusb1_phy { + compatible = "usb-nop-xceiv"; + reset-supply = <&hsusb1_reset>; + vcc-supply = <&hsusb1_power>; + /** + * FIXME: + * put the right clock phandle here when available + * clocks = <&auxclk3>; + * clock-names = "main_clk"; + */ + clock-frequency = <19200000>; + }; }; &omap4_pmx_wkup { @@ -83,6 +119,7 @@ &mcbsp1_pins &dss_hdmi_pins &tpd12s015_pins + &hsusbb1_pins >; twl6030_pins: pinmux_twl6030_pins { @@ -133,6 +170,23 @@ >; }; + hsusbb1_pins: pinmux_hsusbb1_pins { + pinctrl-single,pins = < + 0x82 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_clk.usbb1_ulpiphy_clk */ + 0x84 (PIN_OUTPUT | MUX_MODE4) /* usbb1_ulpitll_stp.usbb1_ulpiphy_stp */ + 0x86 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dir.usbb1_ulpiphy_dir */ + 0x88 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_nxt.usbb1_ulpiphy_nxt */ + 0x8a (PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat0.usbb1_ulpiphy_dat0 */ + 0x8c (PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat1.usbb1_ulpiphy_dat1 */ + 0x8e (PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat2.usbb1_ulpiphy_dat2 */ + 0x90 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat3.usbb1_ulpiphy_dat3 */ + 0x92 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat4.usbb1_ulpiphy_dat4 */ + 0x94 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat5.usbb1_ulpiphy_dat5 */ + 0x96 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat6.usbb1_ulpiphy_dat6 */ + 0x98 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat7.usbb1_ulpiphy_dat7 */ + >; + }; + i2c1_pins: pinmux_i2c1_pins { pinctrl-single,pins = < 0xe2 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl */ @@ -283,3 +337,11 @@ mode = <3>; power = <50>; }; + +&usbhshost { + port1-mode = "ehci-phy"; +}; + +&usbhsehci { + phys = <&hsusb1_phy>; +}; -- 1.7.4.1