From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1422683Ab3FTS6M (ORCPT ); Thu, 20 Jun 2013 14:58:12 -0400 Received: from mail.free-electrons.com ([94.23.35.102]:50359 "EHLO mail.free-electrons.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1422666Ab3FTS6J (ORCPT ); Thu, 20 Jun 2013 14:58:09 -0400 From: Alexandre Belloni To: Shawn Guo , Grant Likely Cc: jimwall@q.com, brian@crystalfontz.com, Maxime Ripard , linux-iio@vger.kernel.org, linux-kernel@vger.kernel.org, linux-doc@vger.kernel.org, linux-arm-kernel@lists.infradead.org, devicetree-discuss@lists.ozlabs.org, Jonathan Cameron , Rob Landley , Rob Herring , Alexandre Belloni Subject: [PATCHv2 0/3] Add support for the Nuvoton NAU7802 ADC to the cfa10049 Date: Thu, 20 Jun 2013 20:57:52 +0200 Message-Id: <1371754675-12242-1-git-send-email-alexandre.belloni@free-electrons.com> X-Mailer: git-send-email 1.8.1.2 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Hi, Sorry for the delay, this is v2 of the patchset that adds support for the 3 Nuvoton NAU7802 ADCs present on the CFA-10049 board from Crystalfontz. The first patch adds the driver, the next ones are adding them in the DT after switching the second i2c bus to bitbanging following a lot of timeout issues we have on that bus. Since v1, I've taken into account the review from Jonathan Cameron, Lars-Peter Clausen and Maxime Ripard: - channels are now statically allocated - no wrappers around i2c functions - sampling_freq is a shared attribute - setting gain is done through scale - cosmetics changes (s/idev/indio_dev/, blank lines before returns) - use of sign_extend32 to extend the sign - reading scale now returns IIO_VAL_FRACTIONAL_LOG2 - no dt lookup for interrupts, this is done in of_i2c.c but that was mask due to a bug. what I didn't address is setting the external reference voltage through a fixed regulator and I kept the vldo attribute to set the internal voltage reference in the DT as Jonathan seemed to be ok with that. If anybody is using a nau7802 with an external reference, it will still be time to add the fixed regulator. It shouldn't be difficult but I don't have any hardware to test. Regards, Alexandre Belloni (1): iio: Add Nuvoton NAU7802 ADC driver Maxime Ripard (2): ARM: mxs: cfa10049: Switch bus i2c1 to bitbanging ARM: mxs: cfa10049: Add NAU7802 ADCs to the device tree .../bindings/iio/adc/nuvoton-nau7802.txt | 17 + arch/arm/boot/dts/imx28-cfa10049.dts | 126 +++-- drivers/iio/adc/Kconfig | 9 + drivers/iio/adc/Makefile | 1 + drivers/iio/adc/nau7802.c | 603 +++++++++++++++++++++ 5 files changed, 713 insertions(+), 43 deletions(-) create mode 100644 Documentation/devicetree/bindings/iio/adc/nuvoton-nau7802.txt create mode 100644 drivers/iio/adc/nau7802.c -- 1.8.1.2