From: Boris BREZILLON <b.brezillon@overkiz.com>
To: Wim Van Sebroeck <wim@iguana.be>,
Nicolas Ferre <nicolas.ferre@atmel.com>,
Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>,
Ludovic Desroches <ludovic.desroches@atmel.com>,
Yang Wenyou <Wenyou.Yang@atmel.com>,
Russell King <linux@arm.linux.org.uk>,
Mark Brown <broonie@opensource.wolfsonmicro.com>,
Bo Shen <voice.shen@atmel.com>,
Richard Genoud <richard.genoud@gmail.com>,
Linus Walleij <linus.walleij@linaro.org>
Cc: linux-watchdog@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
Boris BREZILLON <b.brezillon@overkiz.com>
Subject: [PATCH v2 3/4] ARM: at91/dt: add sam9 watchdog default options to SoCs
Date: Fri, 21 Jun 2013 09:29:26 +0200 [thread overview]
Message-ID: <1371799766-3774-1-git-send-email-b.brezillon@overkiz.com> (raw)
In-Reply-To: <1371799176-3408-1-git-send-email-b.brezillon@overkiz.com>
Set default watchdog options in every SoC compatible with the sam9 watchdog.
Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com>
---
arch/arm/boot/dts/at91sam9260.dtsi | 5 +++++
arch/arm/boot/dts/at91sam9263.dtsi | 5 +++++
arch/arm/boot/dts/at91sam9g45.dtsi | 5 +++++
arch/arm/boot/dts/at91sam9n12.dtsi | 5 +++++
arch/arm/boot/dts/at91sam9x5.dtsi | 5 +++++
arch/arm/boot/dts/sama5d3.dtsi | 5 +++++
6 files changed, 30 insertions(+)
diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi
index 899a7cf..6c44c35 100644
--- a/arch/arm/boot/dts/at91sam9260.dtsi
+++ b/arch/arm/boot/dts/at91sam9260.dtsi
@@ -643,6 +643,11 @@
watchdog@fffffd40 {
compatible = "atmel,at91sam9260-wdt";
reg = <0xfffffd40 0x10>;
+ interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+ atmel,watchdog-type = "hardware";
+ atmel,reset-type = "all";
+ atmel,dbg-halt;
+ atmel,idle-halt;
status = "disabled";
};
};
diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi
index ff63811..6b31ee0 100644
--- a/arch/arm/boot/dts/at91sam9263.dtsi
+++ b/arch/arm/boot/dts/at91sam9263.dtsi
@@ -519,6 +519,11 @@
watchdog@fffffd40 {
compatible = "atmel,at91sam9260-wdt";
reg = <0xfffffd40 0x10>;
+ interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+ atmel,watchdog-type = "hardware";
+ atmel,reset-type = "all";
+ atmel,dbg-halt;
+ atmel,idle-halt;
status = "disabled";
};
diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi
index faec17d..ca1a643 100644
--- a/arch/arm/boot/dts/at91sam9g45.dtsi
+++ b/arch/arm/boot/dts/at91sam9g45.dtsi
@@ -634,6 +634,11 @@
watchdog@fffffd40 {
compatible = "atmel,at91sam9260-wdt";
reg = <0xfffffd40 0x10>;
+ interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+ atmel,watchdog-type = "hardware";
+ atmel,reset-type = "all";
+ atmel,dbg-halt;
+ atmel,idle-halt;
status = "disabled";
};
diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi
index 3166e1d..7c8a5ea 100644
--- a/arch/arm/boot/dts/at91sam9n12.dtsi
+++ b/arch/arm/boot/dts/at91sam9n12.dtsi
@@ -505,6 +505,11 @@
watchdog@fffffe40 {
compatible = "atmel,at91sam9260-wdt";
reg = <0xfffffe40 0x10>;
+ interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+ atmel,watchdog-type = "hardware";
+ atmel,reset-type = "all";
+ atmel,dbg-halt;
+ atmel,idle-halt;
status = "disabled";
};
};
diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi
index e77106e..48eb1cc 100644
--- a/arch/arm/boot/dts/at91sam9x5.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5.dtsi
@@ -742,6 +742,11 @@
watchdog@fffffe40 {
compatible = "atmel,at91sam9260-wdt";
reg = <0xfffffe40 0x10>;
+ interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+ atmel,watchdog-type = "hardware";
+ atmel,reset-type = "all";
+ atmel,dbg-halt;
+ atmel,idle-halt;
status = "disabled";
};
diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi
index c00e158..7974723 100644
--- a/arch/arm/boot/dts/sama5d3.dtsi
+++ b/arch/arm/boot/dts/sama5d3.dtsi
@@ -885,6 +885,11 @@
watchdog@fffffe40 {
compatible = "atmel,at91sam9260-wdt";
reg = <0xfffffe40 0x10>;
+ interrupts = <4 IRQ_TYPE_LEVEL_HIGH 7>;
+ atmel,watchdog-type = "hardware";
+ atmel,reset-type = "all";
+ atmel,dbg-halt;
+ atmel,idle-halt;
status = "disabled";
};
--
1.7.9.5
next prev parent reply other threads:[~2013-06-21 7:30 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-06-21 7:19 [PATCH v2 0/4] watchdog: at91sam9_wdt: handle already configured wdt Boris BREZILLON
2013-06-21 7:21 ` [PATCH v2 1/4] watchdog: at91sam9_wdt: better watchdog support Boris BREZILLON
2013-10-02 16:12 ` [v2,1/4] " Guenter Roeck
2013-10-02 19:27 ` boris brezillon
2013-10-02 19:34 ` Guenter Roeck
2013-10-02 19:53 ` boris brezillon
2013-10-02 20:42 ` Guenter Roeck
2013-06-21 7:23 ` [PATCH v2 2/4] watchdog: at91sam9_wdt: update device tree doc Boris BREZILLON
2013-08-26 13:18 ` boris brezillon
2013-10-02 15:51 ` [v2,2/4] " Guenter Roeck
2013-10-02 16:42 ` boris brezillon
2013-10-03 8:08 ` [PATCH v2 2/4] " Fabio Porcedda
2013-10-03 8:23 ` boris brezillon
2013-10-03 8:26 ` Fabio Porcedda
2013-06-21 7:29 ` Boris BREZILLON [this message]
2013-06-21 7:31 ` [PATCH v2 3/4] ARM: at91/dt: add sam9 watchdog default options to SoCs Boris BREZILLON
2013-06-21 7:32 ` [PATCH v2 4/4] ARM: at91/dt: add watchdog properties to kizbox board Boris BREZILLON
2013-08-26 13:25 ` [PATCH v2 0/4] watchdog: at91sam9_wdt: handle already configured wdt boris brezillon
2013-08-27 0:43 ` Yang, Wenyou
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1371799766-3774-1-git-send-email-b.brezillon@overkiz.com \
--to=b.brezillon@overkiz.com \
--cc=Wenyou.Yang@atmel.com \
--cc=broonie@opensource.wolfsonmicro.com \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-watchdog@vger.kernel.org \
--cc=linux@arm.linux.org.uk \
--cc=ludovic.desroches@atmel.com \
--cc=nicolas.ferre@atmel.com \
--cc=plagnioj@jcrosoft.com \
--cc=richard.genoud@gmail.com \
--cc=voice.shen@atmel.com \
--cc=wim@iguana.be \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®