From: Boris BREZILLON <b.brezillon@overkiz.com>
To: Nicolas Ferre <nicolas.ferre@atmel.com>,
Ludovic Desroches <ludovic.desroches@atmel.com>,
Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>,
Chris Ball <cjb@laptop.org>
Cc: linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, linux-mmc@vger.kernel.org,
Boris BREZILLON <b.brezillon@overkiz.com>
Subject: [PATCH v2 2/4] mmc: atmel-mci: prepare clk before calling enable
Date: Tue, 25 Jun 2013 10:11:31 +0200 [thread overview]
Message-ID: <1372147891-4296-1-git-send-email-b.brezillon@overkiz.com> (raw)
In-Reply-To: <1372147702-4074-1-git-send-email-b.brezillon@overkiz.com>
Replace clk_enable/disable with clk_prepare_enable/disable_unprepare to
avoid common clk framework warnings.
Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com>
---
drivers/mmc/host/atmel-mci.c | 27 ++++++++++++++++++---------
1 file changed, 18 insertions(+), 9 deletions(-)
diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c
index e75774f..631c4cf 100644
--- a/drivers/mmc/host/atmel-mci.c
+++ b/drivers/mmc/host/atmel-mci.c
@@ -380,6 +380,8 @@ static int atmci_regs_show(struct seq_file *s, void *v)
{
struct atmel_mci *host = s->private;
u32 *buf;
+ int ret = 0;
+
buf = kmalloc(ATMCI_REGS_SIZE, GFP_KERNEL);
if (!buf)
@@ -391,9 +393,13 @@ static int atmci_regs_show(struct seq_file *s, void *v)
* consistent.
*/
spin_lock_bh(&host->lock);
- clk_enable(host->mck);
+ ret = clk_prepare_enable(host->mck);
+ if (ret) {
+ spin_unlock_bh(&host->lock);
+ goto out;
+ }
memcpy_fromio(buf, host->regs, ATMCI_REGS_SIZE);
- clk_disable(host->mck);
+ clk_disable_unprepare(host->mck);
spin_unlock_bh(&host->lock);
seq_printf(s, "MR:\t0x%08x%s%s ",
@@ -444,9 +450,10 @@ static int atmci_regs_show(struct seq_file *s, void *v)
val & ATMCI_CFG_LSYNC ? " LSYNC" : "");
}
+out:
kfree(buf);
- return 0;
+ return ret;
}
static int atmci_regs_open(struct inode *inode, struct file *file)
@@ -1281,7 +1288,7 @@ static void atmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
spin_lock_bh(&host->lock);
if (!host->mode_reg) {
- clk_enable(host->mck);
+ clk_prepare_enable(host->mck);
atmci_writel(host, ATMCI_CR, ATMCI_CR_SWRST);
atmci_writel(host, ATMCI_CR, ATMCI_CR_MCIEN);
if (host->caps.has_cfg_reg)
@@ -1361,7 +1368,7 @@ static void atmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
atmci_writel(host, ATMCI_CR, ATMCI_CR_MCIDIS);
if (host->mode_reg) {
atmci_readl(host, ATMCI_MR);
- clk_disable(host->mck);
+ clk_disable_unprepare(host->mck);
}
host->mode_reg = 0;
}
@@ -2379,10 +2386,12 @@ static int __init atmci_probe(struct platform_device *pdev)
if (!host->regs)
goto err_ioremap;
- clk_enable(host->mck);
+ ret = clk_prepare_enable(host->mck);
+ if (ret)
+ goto err_request_irq;
atmci_writel(host, ATMCI_CR, ATMCI_CR_SWRST);
host->bus_hz = clk_get_rate(host->mck);
- clk_disable(host->mck);
+ clk_disable_unprepare(host->mck);
host->mapbase = regs->start;
@@ -2487,11 +2496,11 @@ static int __exit atmci_remove(struct platform_device *pdev)
atmci_cleanup_slot(host->slot[i], i);
}
- clk_enable(host->mck);
+ clk_prepare_enable(host->mck);
atmci_writel(host, ATMCI_IDR, ~0UL);
atmci_writel(host, ATMCI_CR, ATMCI_CR_MCIDIS);
atmci_readl(host, ATMCI_SR);
- clk_disable(host->mck);
+ clk_disable_unprepare(host->mck);
if (host->dma.chan)
dma_release_channel(host->dma.chan);
--
1.7.9.5
next prev parent reply other threads:[~2013-06-25 8:11 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-06-25 8:08 [PATCH v2 0/4] ARM: at91: prepare transition to common clk framework Boris BREZILLON
2013-06-25 8:10 ` [PATCH v2 1/4] ARM: at91/tc/clocksource: replace clk_enable/disable with clk_prepare_enable/disable_unprepare Boris BREZILLON
2013-06-25 8:11 ` Boris BREZILLON [this message]
2013-06-28 7:44 ` [PATCH v2 2/4] mmc: atmel-mci: prepare clk before calling enable Nicolas Ferre
2013-06-28 8:06 ` boris brezillon
2013-06-25 8:12 ` [PATCH v2 3/4] usb: gadget: at91_udc: " Boris BREZILLON
2013-06-25 8:14 ` [PATCH v2 4/4] at91/avr32/atmel_lcdfb: " Boris BREZILLON
2013-06-25 8:16 ` Nicolas Ferre
2013-07-03 11:10 ` Jean-Christophe PLAGNIOL-VILLARD
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1372147891-4296-1-git-send-email-b.brezillon@overkiz.com \
--to=b.brezillon@overkiz.com \
--cc=cjb@laptop.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mmc@vger.kernel.org \
--cc=ludovic.desroches@atmel.com \
--cc=nicolas.ferre@atmel.com \
--cc=plagnioj@jcrosoft.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®