From: Kishon Vijay Abraham I <kishon@ti.com>
To: <lgirdwood@gmail.com>, <broonie@kernel.org>,
<ldewangan@nvidia.com>, <gg@slimlogic.co.uk>,
<sameo@linux.intel.com>, <kishon@ti.com>
Cc: <linux-kernel@vger.kernel.org>
Subject: [PATCH v2] regulator: palmas: model SMPS10 as two regulators
Date: Tue, 25 Jun 2013 14:30:28 +0530 [thread overview]
Message-ID: <1372150828-10519-1-git-send-email-kishon@ti.com> (raw)
SMPS10 has two outputs OUT1 and OUT2 and have one input IN1.
SMPS10-OUT2 is connected to SMPS10-IN1 and can be configured either
in BOOST mode or BYPASS mode. regulator_enable of SMPS10-OUT2 configures
it in BOOST mode. For BYPASS mode regulator_allow_bypass() API can be
used. SMPS10-OUT1 is connected to SMPS10-OUT2 and can be enabled using
regulator_enable().
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
Changes from v1:
Reversed the order of SMPS10_OUT2 and SMPS10_OUT1 since the input signal
of OUT1 is OUT2
drivers/regulator/palmas-regulator.c | 39 ++++++++++++++++++++++++++++++----
include/linux/mfd/palmas.h | 9 ++++----
2 files changed, 40 insertions(+), 8 deletions(-)
diff --git a/drivers/regulator/palmas-regulator.c b/drivers/regulator/palmas-regulator.c
index 3ae44ac..50ca8c0 100644
--- a/drivers/regulator/palmas-regulator.c
+++ b/drivers/regulator/palmas-regulator.c
@@ -97,11 +97,16 @@ static const struct regs_info palmas_regs_info[] = {
.ctrl_addr = PALMAS_SMPS9_CTRL,
},
{
- .name = "SMPS10",
+ .name = "SMPS10_OUT2",
.sname = "smps10-in",
.ctrl_addr = PALMAS_SMPS10_CTRL,
},
{
+ .name = "SMPS10_OUT1",
+ .sname = "smps10-out2",
+ .ctrl_addr = PALMAS_SMPS10_CTRL,
+ },
+ {
.name = "LDO1",
.sname = "ldo1-in",
.vsel_addr = PALMAS_LDO1_VOLTAGE,
@@ -487,6 +492,8 @@ static struct regulator_ops palmas_ops_smps10 = {
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.list_voltage = regulator_list_voltage_linear,
.map_voltage = regulator_map_voltage_linear,
+ .set_bypass = regulator_set_bypass_regmap,
+ .get_bypass = regulator_get_bypass_regmap,
};
static int palmas_is_enabled_ldo(struct regulator_dev *dev)
@@ -538,7 +545,8 @@ static int palmas_smps_init(struct palmas *palmas, int id,
return ret;
switch (id) {
- case PALMAS_REG_SMPS10:
+ case PALMAS_REG_SMPS10_OUT1:
+ case PALMAS_REG_SMPS10_OUT2:
reg &= ~PALMAS_SMPS10_CTRL_MODE_SLEEP_MASK;
if (reg_init->mode_sleep)
reg |= reg_init->mode_sleep <<
@@ -681,7 +689,8 @@ static struct of_regulator_match palmas_matches[] = {
{ .name = "smps7", },
{ .name = "smps8", },
{ .name = "smps9", },
- { .name = "smps10", },
+ { .name = "smps10_out2", },
+ { .name = "smps10_out1", },
{ .name = "ldo1", },
{ .name = "ldo2", },
{ .name = "ldo3", },
@@ -869,7 +878,25 @@ static int palmas_regulators_probe(struct platform_device *pdev)
pmic->desc[id].id = id;
switch (id) {
- case PALMAS_REG_SMPS10:
+ case PALMAS_REG_SMPS10_OUT1:
+ pmic->desc[id].n_voltages = PALMAS_SMPS10_NUM_VOLTAGES;
+ pmic->desc[id].ops = &palmas_ops_smps10;
+ pmic->desc[id].vsel_reg =
+ PALMAS_BASE_TO_REG(PALMAS_SMPS_BASE,
+ PALMAS_SMPS10_CTRL);
+ pmic->desc[id].vsel_mask = SMPS10_VSEL;
+ pmic->desc[id].enable_reg =
+ PALMAS_BASE_TO_REG(PALMAS_SMPS_BASE,
+ PALMAS_SMPS10_CTRL);
+ pmic->desc[id].enable_mask = SMPS10_SWITCH_EN;
+ pmic->desc[id].bypass_reg =
+ PALMAS_BASE_TO_REG(PALMAS_SMPS_BASE,
+ PALMAS_SMPS10_CTRL);
+ pmic->desc[id].bypass_mask = SMPS10_BYPASS_EN;
+ pmic->desc[id].min_uV = 3750000;
+ pmic->desc[id].uV_step = 1250000;
+ break;
+ case PALMAS_REG_SMPS10_OUT2:
pmic->desc[id].n_voltages = PALMAS_SMPS10_NUM_VOLTAGES;
pmic->desc[id].ops = &palmas_ops_smps10;
pmic->desc[id].vsel_reg =
@@ -880,6 +907,10 @@ static int palmas_regulators_probe(struct platform_device *pdev)
PALMAS_BASE_TO_REG(PALMAS_SMPS_BASE,
PALMAS_SMPS10_CTRL);
pmic->desc[id].enable_mask = SMPS10_BOOST_EN;
+ pmic->desc[id].bypass_reg =
+ PALMAS_BASE_TO_REG(PALMAS_SMPS_BASE,
+ PALMAS_SMPS10_CTRL);
+ pmic->desc[id].bypass_mask = SMPS10_BYPASS_EN;
pmic->desc[id].min_uV = 3750000;
pmic->desc[id].uV_step = 1250000;
break;
diff --git a/include/linux/mfd/palmas.h b/include/linux/mfd/palmas.h
index 9b81b2b..5251379 100644
--- a/include/linux/mfd/palmas.h
+++ b/include/linux/mfd/palmas.h
@@ -146,7 +146,8 @@ enum palmas_regulators {
PALMAS_REG_SMPS7,
PALMAS_REG_SMPS8,
PALMAS_REG_SMPS9,
- PALMAS_REG_SMPS10,
+ PALMAS_REG_SMPS10_OUT2,
+ PALMAS_REG_SMPS10_OUT1,
/* LDO regulators */
PALMAS_REG_LDO1,
PALMAS_REG_LDO2,
@@ -341,9 +342,9 @@ struct palmas_pmic {
int smps123;
int smps457;
- int range[PALMAS_REG_SMPS10];
- unsigned int ramp_delay[PALMAS_REG_SMPS10];
- unsigned int current_reg_mode[PALMAS_REG_SMPS10];
+ int range[PALMAS_REG_SMPS10_OUT1];
+ unsigned int ramp_delay[PALMAS_REG_SMPS10_OUT1];
+ unsigned int current_reg_mode[PALMAS_REG_SMPS10_OUT1];
};
struct palmas_resource {
--
1.7.10.4
next reply other threads:[~2013-06-25 9:00 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-06-25 9:00 Kishon Vijay Abraham I [this message]
2013-06-25 10:40 ` Laxman Dewangan
2013-06-28 11:36 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1372150828-10519-1-git-send-email-kishon@ti.com \
--to=kishon@ti.com \
--cc=broonie@kernel.org \
--cc=gg@slimlogic.co.uk \
--cc=ldewangan@nvidia.com \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=sameo@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®