mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Nick Dyer <nick.dyer@itdev.co.uk>
To: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Daniel Kurtz <djkurtz@chromium.org>,
	Henrik Rydberg <rydberg@euromail.se>,
	Joonyoung Shim <jy0922.shim@samsung.com>,
	Alan Bowens <Alan.Bowens@atmel.com>,
	linux-input@vger.kernel.org, linux-kernel@vger.kernel.org,
	Peter Meerwald <pmeerw@pmeerw.net>,
	Benson Leung <bleung@chromium.org>,
	Olof Johansson <olofj@chromium.org>,
	Nick Dyer <nick.dyer@itdev.co.uk>
Subject: [PATCH 33/51] Input: atmel_mxt_ts - Split message handler into separate functions
Date: Thu, 27 Jun 2013 13:49:08 +0100	[thread overview]
Message-ID: <1372337366-9286-34-git-send-email-nick.dyer@itdev.co.uk> (raw)
In-Reply-To: <1372337366-9286-1-git-send-email-nick.dyer@itdev.co.uk>

This is in preparation for support of the T44 message count object.

Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk>
Acked-by: Benson Leung <bleung@chromium.org>
---
 drivers/input/touchscreen/atmel_mxt_ts.c |  111 ++++++++++++++++--------------
 1 file changed, 58 insertions(+), 53 deletions(-)

diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index 3890ed5..ef68bf1 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -252,8 +252,10 @@ struct mxt_data {
 	struct t7_config t7_cfg;
 	u8 *msg_buf;
 	u8 t6_status;
+	bool update_input;
 
 	/* Cached parameters from object table */
+	u16 T5_address;
 	u8 T5_msg_size;
 	u8 T6_reportid;
 	u16 T6_address;
@@ -668,20 +670,6 @@ static void mxt_proc_t6_messages(struct mxt_data *data, u8 *msg)
 	data->t6_status = status;
 }
 
-static int mxt_read_message(struct mxt_data *data, u8 *message)
-{
-	struct mxt_object *object;
-	u16 reg;
-
-	object = mxt_get_object(data, MXT_GEN_MESSAGE_T5);
-	if (!object)
-		return -EINVAL;
-
-	reg = object->start_address;
-	return __mxt_read_reg(data->client, reg,
-			data->T5_msg_size, message);
-}
-
 static void mxt_input_button(struct mxt_data *data, u8 *message)
 {
 	struct input_dev *input = data->input_dev;
@@ -708,7 +696,7 @@ static void mxt_input_sync(struct input_dev *input_dev)
 	input_sync(input_dev);
 }
 
-static void mxt_input_touchevent(struct mxt_data *data, u8 *message)
+static void mxt_proc_t9_message(struct mxt_data *data, u8 *message)
 {
 	struct device *dev = &data->client->dev;
 	struct input_dev *input_dev = data->input_dev;
@@ -772,44 +760,61 @@ static void mxt_input_touchevent(struct mxt_data *data, u8 *message)
 		/* Touch no longer active, close out slot */
 		input_mt_report_slot_state(input_dev, MT_TOOL_FINGER, 0);
 	}
+
+	data->update_input = true;
 }
 
-static bool mxt_is_T9_message(struct mxt_data *data, u8 *msg)
+static int mxt_proc_message(struct mxt_data *data, u8 *message)
 {
-	u8 id = msg[0];
-	return (id >= data->T9_reportid_min && id <= data->T9_reportid_max);
+	u8 report_id = message[0];
+
+	if (report_id == MXT_RPTID_NOMSG)
+		return 0;
+
+	if (report_id == data->T6_reportid) {
+		mxt_proc_t6_messages(data, message);
+	} else if (report_id >= data->T9_reportid_min
+	    && report_id <= data->T9_reportid_max) {
+		mxt_proc_t9_message(data, message);
+	} else if (report_id == data->T19_reportid) {
+		mxt_input_button(data, message);
+		data->update_input = true;
+	} else {
+		mxt_dump_message(data, message);
+	}
+
+	return 1;
 }
 
-static irqreturn_t mxt_process_messages_until_invalid(struct mxt_data *data)
+static int mxt_read_and_process_message(struct mxt_data *data)
 {
-	u8 *message = &data->msg_buf[0];
 	struct device *dev = &data->client->dev;
-	u8 reportid;
-	bool update_input = false;
+	int ret;
 
-	do {
-		if (mxt_read_message(data, message)) {
-			dev_err(dev, "Failed to read message\n");
-			return IRQ_NONE;
-		}
+	ret = __mxt_read_reg(data->client, data->T5_address,
+				data->T5_msg_size, data->msg_buf);
+	if (ret) {
+		dev_err(dev, "Error %d reading message\n", ret);
+		return ret;
+	}
 
-		reportid = message[0];
+	return mxt_proc_message(data, data->msg_buf);
+}
 
-		if (reportid == data->T6_reportid) {
-			mxt_proc_t6_messages(data, message);
-		} else if (mxt_is_T9_message(data, message)) {
-			mxt_input_touchevent(data, message);
-			update_input = true;
-		} else if (reportid == data->T19_reportid) {
-			mxt_input_button(data, message);
-			update_input = true;
-		} else {
-			mxt_dump_message(data, message);
-		}
-	} while (reportid != MXT_RPTID_NOMSG);
+static irqreturn_t mxt_process_messages_until_invalid(struct mxt_data *data)
+{
+	int ret;
+
+	do {
+		ret = mxt_read_and_process_message(data);
+		if (ret < 0)
+			return IRQ_NONE;
+	} while (ret > 0);
 
-	if (data->enable_reporting && update_input)
+	if (data->enable_reporting && data->update_input) {
 		mxt_input_sync(data->input_dev);
+		data->update_input = false;
+	}
 
 	return IRQ_HANDLED;
 }
@@ -1256,21 +1261,19 @@ static int mxt_make_highchg(struct mxt_data *data)
 {
 	struct device *dev = &data->client->dev;
 	int count = 10;
-	int error;
+	int ret;
 
-	/* Read dummy message to make high CHG pin */
+	/* Read messages until we force an invalid */
 	do {
-		error = mxt_read_message(data, data->msg_buf);
-		if (error)
-			return error;
-	} while (data->msg_buf[0] != MXT_RPTID_NOMSG && --count);
-
-	if (!count) {
-		dev_err(dev, "CHG pin isn't cleared\n");
-		return -EBUSY;
-	}
+		ret = mxt_read_and_process_message(data);
+		if (ret == 0)
+			return 0;
+		else if (ret < 0)
+			return ret;
+	} while (--count);
 
-	return 0;
+	dev_err(dev, "CHG pin isn't cleared\n");
+	return -EBUSY;
 }
 
 static int mxt_acquire_irq(struct mxt_data *data)
@@ -1307,6 +1310,7 @@ static void mxt_free_object_table(struct mxt_data *data)
 	kfree(data->msg_buf);
 	data->msg_buf = NULL;
 	data->enable_reporting = false;
+	data->T5_address = 0;
 	data->T5_msg_size = 0;
 	data->T6_reportid = 0;
 	data->T7_address = 0;
@@ -1359,6 +1363,7 @@ static int mxt_get_object_table(struct mxt_data *data)
 		case MXT_GEN_MESSAGE_T5:
 			/* CRC not enabled, therefore don't read last byte */
 			data->T5_msg_size = mxt_obj_size(object) - 1;
+			data->T5_address = object->start_address;
 		case MXT_GEN_COMMAND_T6:
 			data->T6_reportid = min_id;
 			data->T6_address = object->start_address;
-- 
1.7.10.4


  parent reply	other threads:[~2013-06-27 12:50 UTC|newest]

Thread overview: 87+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-06-27 12:48 Atmel updates to atmel_mxt_ts touch controller driver - v6 Nick Dyer
2013-06-27 12:48 ` [PATCH 01/51] Input: atmel_mxt_ts - Remove unnecessary platform data Nick Dyer
2013-06-27 12:48 ` [PATCH 02/51] Input: atmel_mxt_ts - Improve T19 GPIO keys handling Nick Dyer
2013-07-18 17:11   ` rydberg
2013-06-27 12:48 ` [PATCH 03/51] Input: atmel_mxt_ts - Return IRQ_NONE when interrupt handler fails Nick Dyer
2013-06-27 12:48 ` [PATCH 04/51] Input: atmel_mxt_ts - define helper functions for size and instances Nick Dyer
2013-06-27 12:48 ` [PATCH 05/51] Input: atmel_mxt_ts - Select FW_LOADER for firmware code Nick Dyer
2013-06-27 12:48 ` [PATCH 06/51] Input: atmel_mxt_ts - wait for CHG assert in mxt_check_bootloader Nick Dyer
2013-06-27 12:48 ` [PATCH 07/51] Input: atmel_mxt_ts - wait for CHG after bootloader resets Nick Dyer
2013-06-27 12:48 ` [PATCH 08/51] Input: atmel_mxt_ts - Initialise IRQ before probing Nick Dyer
2013-07-18 17:13   ` rydberg
2013-06-27 12:48 ` [PATCH 09/51] Input: atmel_mxt_ts - Make wait-after-reset period compatible with all chips Nick Dyer
2013-06-27 12:48 ` [PATCH 10/51] Input: atmel_mxt_ts - Improve error reporting and debug Nick Dyer
2013-06-27 12:48 ` [PATCH 11/51] Input: atmel_mxt_ts - Implement CRC check for configuration data Nick Dyer
2013-09-18 16:59   ` [11/51] " Martin Fuzzey
2013-06-27 12:48 ` [PATCH 12/51] Input: atmel_mxt_ts - Download device config using firmware loader Nick Dyer
2013-09-18 17:08   ` [12/51] " Martin Fuzzey
2013-06-27 12:48 ` [PATCH 13/51] Input: atmel_mxt_ts - Calculate and check CRC in config file Nick Dyer
2013-06-27 12:48 ` [PATCH 14/51] Input: atmel_mxt_ts - Add additional bootloader addresses Nick Dyer
2013-06-27 12:48 ` [PATCH 15/51] Input: atmel_mxt_ts - Read and report bootloader version Nick Dyer
2013-06-27 12:48 ` [PATCH 16/51] Input: atmel_mxt_ts - Implement bootloader frame retries Nick Dyer
2013-06-27 12:48 ` [PATCH 17/51] Input: atmel_mxt_ts - Improve bootloader progress output Nick Dyer
2013-06-27 12:48 ` [PATCH 18/51] Input: atmel_mxt_ts - Add check for incorrect firmware file format Nick Dyer
2013-06-27 12:48 ` [PATCH 19/51] Input: atmel_mxt_ts - Read screen config from chip Nick Dyer
2013-06-27 12:48 ` [PATCH 20/51] Input: atmel_mxt_ts - Set default irqflags when there is no pdata Nick Dyer
2013-07-18 17:17   ` rydberg
2013-09-16  2:25     ` Dmitry Torokhov
2014-05-22 14:29       ` Nick Dyer
2014-05-23 16:37         ` Yufeng Shen
2014-05-24 12:41           ` Nick Dyer
2014-05-26 18:17             ` Yufeng Shen
2014-05-26  5:23           ` Dmitry Torokhov
2014-05-26 18:13             ` Yufeng Shen
2013-06-27 12:48 ` [PATCH 21/51] Input: atmel_mxt_ts - Use deep sleep mode when stopped Nick Dyer
2013-06-27 12:48 ` [PATCH 22/51] Input: atmel_mxt_ts - Add shutdown function Nick Dyer
2013-07-07  5:29   ` Dmitry Torokhov
2013-07-08  9:56     ` Nick Dyer
2013-07-10 16:55       ` Dmitry Torokhov
2013-07-10 18:32         ` Nick Dyer
2013-06-27 12:48 ` [PATCH 23/51] Input: atmel_mxt_ts - Rename pressure to amplitude to match spec Nick Dyer
2013-06-27 12:48 ` [PATCH 24/51] Input: atmel_mxt_ts - Rename touchscreen defines to include T9 Nick Dyer
2013-06-27 12:49 ` [PATCH 25/51] Input: atmel_mxt_ts - Handle multiple input reports in one message Nick Dyer
2013-07-18 17:18   ` rydberg
2013-06-27 12:49 ` [PATCH 26/51] Input: atmel_mxt_ts - Move input device init into separate function Nick Dyer
2013-07-07  5:34   ` Dmitry Torokhov
2013-07-08  9:41     ` Nick Dyer
2013-07-10 16:53       ` Dmitry Torokhov
2013-07-18 17:20   ` rydberg
2013-06-27 12:49 ` [PATCH 27/51] Input: atmel_mxt_ts - Handle APP_CRC_FAIL on startup Nick Dyer
2013-06-27 12:49 ` [PATCH 28/51] Input: atmel_mxt_ts - Handle bootloader previously unlocked Nick Dyer
2013-06-27 12:49 ` [PATCH 29/51] Input: atmel_mxt_ts - Add bootloader addresses for new chips Nick Dyer
2013-06-27 12:49 ` [PATCH 30/51] Input: atmel_mxt_ts - Recover from bootloader on probe Nick Dyer
2013-06-27 12:49 ` [PATCH 31/51] Input: atmel_mxt_ts - Add support for dynamic message size Nick Dyer
2013-06-27 12:49 ` [PATCH 32/51] Input: atmel_mxt_ts - Decode T6 status messages Nick Dyer
2013-06-27 12:49 ` Nick Dyer [this message]
2013-06-27 12:49 ` [PATCH 34/51] Input: atmel_mxt_ts - Implement T44 message handling Nick Dyer
2013-06-27 12:49 ` [PATCH 35/51] Input: atmel_mxt_ts - Output status from T48 Noise Supression Nick Dyer
2013-06-27 12:49 ` [PATCH 36/51] Input: atmel_mxt_ts - Output status from T42 Touch Suppression Nick Dyer
2013-06-27 12:49 ` [PATCH 37/51] Input: atmel_mxt_ts - Implement vector/orientation support Nick Dyer
2013-07-18 17:20   ` rydberg
2013-08-15 16:18     ` Nick Dyer
2013-06-27 12:49 ` [PATCH 38/51] Input: atmel_mxt_ts - implement I2C retries Nick Dyer
2013-06-27 12:49 ` [PATCH 39/51] Input: atmel_mxt_ts - Implement T63 Active Stylus support Nick Dyer
2013-07-18 17:21   ` rydberg
2013-06-27 12:49 ` [PATCH 40/51] Input: atmel_mxt_ts - Implement support for T15 Key Array Nick Dyer
2013-06-27 12:49 ` [PATCH 41/51] Input: atmel_mxt_ts - Remove unused defines Nick Dyer
2013-06-27 12:49 ` [PATCH 42/51] Input: atmel_mxt_ts - Verify Information Block checksum on probe Nick Dyer
2013-06-27 12:49 ` [PATCH 43/51] Input: atmel_mxt_ts - Use T18 RETRIGEN to handle IRQF_TRIGGER_LOW Nick Dyer
2013-06-27 12:49 ` [PATCH 44/51] Input: atmel_mxt_ts - Handle reports from T47 Stylus object Nick Dyer
2013-07-18 17:23   ` rydberg
2013-06-27 12:49 ` [PATCH 45/51] Input: atmel_mxt_ts - Release touch state during suspend Nick Dyer
2013-07-18 17:29   ` rydberg
2013-08-15 15:52     ` Nick Dyer
2013-06-27 12:49 ` [PATCH 46/51] Input: atmel_mxt_ts - Initialize power config before and after downloading cfg Nick Dyer
2013-06-27 12:49 ` [PATCH 47/51] Input: atmel_mxt_ts - Add regulator control support Nick Dyer
2013-06-27 12:49 ` [PATCH 48/51] Input: atmel_mxt_ts - Implement support for T100 touch object Nick Dyer
2013-06-27 12:49 ` [PATCH 49/51] Input: atmel_mxt_ts - Allow specification of firmware file name Nick Dyer
2013-06-27 12:49 ` [PATCH 50/51] Input: atmel_mxt_ts - Handle cfg filename via pdata/sysfs Nick Dyer
2013-06-27 12:49 ` [PATCH 51/51] Input: atmel_mxt_ts - Only use first T9 instance Nick Dyer
2013-06-27 15:17 ` Atmel updates to atmel_mxt_ts touch controller driver - v6 Nick Dyer
2013-07-18 19:47 ` rydberg
2013-08-15 15:55   ` Nick Dyer
2013-08-15 16:07     ` Dmitry Torokhov
2013-08-19 14:24       ` Nick Dyer
2013-09-10 13:58       ` Nick Dyer
     [not found]         ` <CAPDwgkOo7FYLujk16kJM=BqmXRKvZ2S_LOYURW0cXT5t=cmi6w@mail.gmail.com>
2014-01-15 10:44           ` Nick Dyer
     [not found]             ` <CAPDwgkOsP4K7r0-Mo-U52X9knRbGgbuD4dGptmj3x-LMTN75BA@mail.gmail.com>
2014-01-17 20:01               ` Nick Dyer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1372337366-9286-34-git-send-email-nick.dyer@itdev.co.uk \
    --to=nick.dyer@itdev.co.uk \
    --cc=Alan.Bowens@atmel.com \
    --cc=bleung@chromium.org \
    --cc=djkurtz@chromium.org \
    --cc=dmitry.torokhov@gmail.com \
    --cc=jy0922.shim@samsung.com \
    --cc=linux-input@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=olofj@chromium.org \
    --cc=pmeerw@pmeerw.net \
    --cc=rydberg@euromail.se \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

Powered by JetHome