mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Yadwinder Singh Brar <yadi.brar@samsung.com>
To: linux-kernel@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org, sbkim73@samsung.com,
	sameo@linux.intel.com, mturquette@linaro.org,
	lee.jones@linaro.org, broonie@kernel.org, yadi.brar01@gmail.com,
	Yadwinder Singh Brar <yadi.brar@samsung.com>
Subject: [PATCH 2/3] mfd: sec: Add clock cell for s2mps11
Date: Sun, 07 Jul 2013 17:14:21 +0530	[thread overview]
Message-ID: <1373197462-4033-3-git-send-email-yadi.brar@samsung.com> (raw)
In-Reply-To: <1373197462-4033-1-git-send-email-yadi.brar@samsung.com>

This patch adds clock to list of mfd cells for s2mps11 and DT documentation
for clock part.

Signed-off-by: Yadwinder Singh Brar <yadi.brar@samsung.com>
---
 Documentation/devicetree/bindings/mfd/s2mps11.txt |   20 ++++++++++++++++++++
 drivers/mfd/sec-core.c                            |    4 +++-
 2 files changed, 23 insertions(+), 1 deletions(-)

diff --git a/Documentation/devicetree/bindings/mfd/s2mps11.txt b/Documentation/devicetree/bindings/mfd/s2mps11.txt
index 36269c4..e41dd16 100644
--- a/Documentation/devicetree/bindings/mfd/s2mps11.txt
+++ b/Documentation/devicetree/bindings/mfd/s2mps11.txt
@@ -16,6 +16,21 @@ Optional properties:
 - interrupts: Interrupt specifiers for interrupt sources.
 
 Optional nodes:
+- clocks: s2mps11 provides three(AP/CP/BT) buffered 32.768 KHz outputs, so to
+  register these as clocks with common clock framework instantiate a sub-node
+  named "clocks". It uses the common clock binding documented in :
+  [Documentation/devicetree/bindings/clock/clock-bindings.txt]
+  - #clock-cells: should be 1.
+
+  - The following is the list of clocks generated by the controller. Each clock
+    is assigned an identifier and client nodes use this identifier to specify
+    the clock which they consume.
+    Clock               ID
+    ----------------------
+    32KhzAP		0
+    32KhzCP		1
+    32KhzBT		2
+
 - regulators: The regulators of s2mps11 that have to be instantiated should be
 included in a sub-node named 'regulators'. Regulator nodes included in this
 sub-node should be of the format as listed below.
@@ -55,6 +70,11 @@ Example:
 		compatible = "samsung,s2mps11-pmic";
 		reg = <0x66>;
 
+		s2m_osc: clocks{
+			#clock-cells = 1;
+			clock-output-names = "xx", "yy", "zz";
+		};
+
 		regulators {
 			ldo1_reg: LDO1 {
 				regulator-name = "VDD_ABB_3.3V";
diff --git a/drivers/mfd/sec-core.c b/drivers/mfd/sec-core.c
index 760da8a..eaee5ec 100644
--- a/drivers/mfd/sec-core.c
+++ b/drivers/mfd/sec-core.c
@@ -58,7 +58,9 @@ static struct mfd_cell s5m8767_devs[] = {
 static struct mfd_cell s2mps11_devs[] = {
 	{
 		.name = "s2mps11-pmic",
-	},
+	}, {
+		.name = "s2mps11-clk",
+	}
 };
 
 #ifdef CONFIG_OF
-- 
1.7.0.4


  parent reply	other threads:[~2013-07-16 11:53 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-07-07 11:44 [PATCH 0/3] Add clk driver to register s2mps11 clocks Yadwinder Singh Brar
2013-07-07 11:44 ` [PATCH 1/3] clk: s2mps11: Add support for s2mps11 Yadwinder Singh Brar
2013-07-26 15:43   ` Yadwinder Singh Brar
2013-08-05 23:23   ` Mike Turquette
2013-08-06  4:25     ` Yadwinder Singh Brar
     [not found]       ` <20130806195235.5348.32684@quantum>
2013-08-07  8:00         ` Lee Jones
2013-07-07 11:44 ` Yadwinder Singh Brar [this message]
2013-07-17 11:23   ` [PATCH 2/3] mfd: sec: Add clock cell " Lee Jones
2013-08-07 17:16   ` Mike Turquette
2013-08-08  9:05     ` Lee Jones
2013-07-07 11:44 ` [PATCH 3/3] mfd: s2mps11: Remove clocks from regulators list Yadwinder Singh Brar
2013-07-17 11:27   ` Lee Jones

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1373197462-4033-3-git-send-email-yadi.brar@samsung.com \
    --to=yadi.brar@samsung.com \
    --cc=broonie@kernel.org \
    --cc=lee.jones@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mturquette@linaro.org \
    --cc=sameo@linux.intel.com \
    --cc=sbkim73@samsung.com \
    --cc=yadi.brar01@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®