mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Andrii Tseglytskyi <andrii.tseglytskyi@ti.com>
To: <khilman@linaro.org>
Cc: <linux-kernel@vger.kernel.org>, <linux-omap@vger.kernel.org>,
	<linux-pm@vger.kernel.org>, Nishanth Menon <nm@ti.com>,
	Andrii Tseglytskyi <andrii.tseglytskyi@ti.com>
Subject: [PATCH v1 1/2] PM / AVS: SmartReflex: fix interrupt disable sequence
Date: Fri, 12 Jul 2013 16:52:02 +0300	[thread overview]
Message-ID: <1373637123-1152-2-git-send-email-andrii.tseglytskyi@ti.com> (raw)
In-Reply-To: <1373637123-1152-1-git-send-email-andrii.tseglytskyi@ti.com>

From: Nishanth Menon <nm@ti.com>

With the current interrupt disable sequence, we disable IRQENABLE
followed by clearing of IRQSTATUS. With this sequence, we see, at
times CORE domain does not hit OFF mode during cold boot because
SR modules(Core/IVA/MPU domains) are stuck 'in transition'. This
is due to IP Generic behavior around how swakeup is controlled
towards PRCM.

The right sequence we have is write to IRQSTATUS register
to clear the interrupt, then write to IRQENABLE_CLR register to
disable the interrupt to ensure that no pending interrupts exist
in the system on disable of SmartReflex AVS block.

Reported-by: Honda Kenji <x0092217@ti.com>
Reported-by: Maki Tanaka <m-tanaka1@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Andrii Tseglytskyi <andrii.tseglytskyi@ti.com>
---
 drivers/power/avs/smartreflex.c |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/power/avs/smartreflex.c b/drivers/power/avs/smartreflex.c
index 6b2238b..5b2b703 100644
--- a/drivers/power/avs/smartreflex.c
+++ b/drivers/power/avs/smartreflex.c
@@ -295,12 +295,12 @@ static void sr_v2_disable(struct omap_sr *sr)
 	else
 		sr_modify_reg(sr, ERRCONFIG_V2, ERRCONFIG_VPBOUNDINTEN_V2,
 				0x0);
-	sr_write_reg(sr, IRQENABLE_CLR, (IRQENABLE_MCUACCUMINT |
-			IRQENABLE_MCUVALIDINT |
-			IRQENABLE_MCUBOUNDSINT));
 	sr_write_reg(sr, IRQSTATUS, (IRQSTATUS_MCUACCUMINT |
 			IRQSTATUS_MCVALIDINT |
 			IRQSTATUS_MCBOUNDSINT));
+	sr_write_reg(sr, IRQENABLE_CLR, (IRQENABLE_MCUACCUMINT |
+			IRQENABLE_MCUVALIDINT |
+			IRQENABLE_MCUBOUNDSINT));
 
 	/*
 	 * Wait for SR to be disabled.
@@ -315,8 +315,8 @@ static void sr_v2_disable(struct omap_sr *sr)
 			__func__);
 
 	/* Disable MCUDisableAcknowledge interrupt & clear pending interrupt */
-	sr_write_reg(sr, IRQENABLE_CLR, IRQENABLE_MCUDISABLEACKINT);
 	sr_write_reg(sr, IRQSTATUS, IRQSTATUS_MCUDISABLEACKINT);
+	sr_write_reg(sr, IRQENABLE_CLR, IRQENABLE_MCUDISABLEACKINT);
 }
 
 static struct omap_sr_nvalue_table *sr_retrieve_nvalue_row(
-- 
1.7.9.5


  reply	other threads:[~2013-07-12 13:52 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-07-12 13:52 [PATCH v1 0/2] PM / AVS: interrupt handling fixes Andrii Tseglytskyi
2013-07-12 13:52 ` Andrii Tseglytskyi [this message]
2013-07-12 13:52 ` [PATCH v1 2/2] PM / AVS: SmartReflex: disable spamming interrupts Andrii Tseglytskyi
2013-08-05 16:24 ` [PATCH v1 0/2] PM / AVS: interrupt handling fixes Kevin Hilman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1373637123-1152-2-git-send-email-andrii.tseglytskyi@ti.com \
    --to=andrii.tseglytskyi@ti.com \
    --cc=khilman@linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=nm@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®