mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Darren Hart <dvhart@linux.intel.com>
To: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
	"David S. Miller" <davem@davemloft.net>,
	"H. Peter Anvin" <hpa@zytor.com>,
	Peter Waskiewicz <peter.p.waskiewicz.jr@intel.com>,
	netdev@vger.kernel.org, stable@vger.kernel.org
Subject: Re: [PATCH 3/3] pch_gbe: Add MinnowBoard support
Date: Mon, 15 Jul 2013 13:41:10 -0700	[thread overview]
Message-ID: <1373920870.3475.200.camel@envy.home> (raw)
In-Reply-To: <1373877289.24799.242.camel@smile>

On Mon, 2013-07-15 at 11:34 +0300, Andy Shevchenko wrote:
> On Fri, 2013-07-12 at 17:58 -0700, Darren Hart wrote: 

... 
> > +/* The AR803X PHY on the MinnowBoard requires a physical pin to be toggled to
> > + * ensure it is awake for probe and init. Request the line and reset the PHY.
> > + */
> > +static int pch_gbe_minnow_platform_init(struct pci_dev *pdev)
> > +{
> > +	int ret = 0;
> > +	int flags = GPIOF_DIR_OUT | GPIOF_INIT_HIGH | GPIOF_EXPORT;
> > +	int gpio = MINNOW_PHY_RESET_GPIO;
> > +
> > +	ret = gpio_request_one(gpio, flags, "minnow_phy_reset");
> > +	if (ret){
> > +		dev_err(&pdev->dev,
> > +			"ERR: Can't request PHY reset GPIO line '%d'\n", gpio);
> > +		return ret;
> > +	}
> > +
> > +	gpio_set_value(gpio, 0);
> > +	usleep_range(1250, 1500);
> > +	gpio_set_value(gpio, 1);
> > +	usleep_range(1250, 1500);
> 
> First of all, who is going to release gpio? Perhaps
> devm_gpio_request_one?

Thanks for the pointer, this works and appears to be the best way to
handle this.

...
> > + */
> > +int pch_gbe_phy_tx_clk_delay(struct pch_gbe_hw *hw)
> > +{
> > +	/* The RGMII interface requires a ~2ns TX clock delay. This is typically
> > +	 * done in layout with a longer trace or via PHY strapping, but can also
> > +	 * be done via PHY configuration registers.
> > +	 */
> > +	struct pch_gbe_adapter *adapter = pch_gbe_hw_to_adapter(hw);
> > +	u16 mii_reg;
> > +	int ret = 0;
> 
> No need to assign. Are you trying to shut (sparse?) warning?

On this point, I did find one instance where I initialized init only to
have my first line of executable code assign to ret, that's obviously
silly, so I fixed that one.

Here, where the first assignment is nested inside case statements or
skipped altogether with explicit returns of error codes, I prefer to
assign it explicitly. A quick survey lists 4k initialized "int ret;"
lines and 16k uninitialized.  The latter appears to be the more common,
but there is certainly precedent for the former.

-- 
Darren Hart
Intel Open Source Technology Center
Yocto Project - Technical Lead - Linux Kernel


  reply	other threads:[~2013-07-15 20:41 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-07-13  0:58 [PATCH 0/3] MinnowBoard Support V2 (Serial and Ethernet) Darren Hart
2013-07-13  0:58 ` [PATCH 1/3] pch_uart: Use DMI interface for board detection Darren Hart
2013-07-13  0:58   ` [PATCH 2/3] pch_gbe: Use PCH_GBE_PHY_REGS_LEN instead of 32 Darren Hart
2013-07-13  0:58   ` [PATCH 3/3] pch_gbe: Add MinnowBoard support Darren Hart
2013-07-13  1:10     ` Joe Perches
2013-07-13  5:52       ` Darren Hart
2013-07-13  1:17     ` Greg KH
2013-07-13  5:46       ` Darren Hart
2013-07-13  6:26         ` Greg KH
2013-07-13 16:08           ` Darren Hart
2013-07-13 17:09             ` Greg KH
2013-07-13 19:33               ` Darren Hart
2013-07-15  8:34     ` Andy Shevchenko
2013-07-15 20:41       ` Darren Hart [this message]
2013-07-18 17:05       ` Darren Hart
2013-07-15 20:55     ` Darren Hart
2013-07-17 20:13     ` Darren Hart
2013-07-17 20:15   ` [PATCH 1/3] pch_uart: Use DMI interface for board detection Darren Hart
2013-07-17 21:55     ` Greg Kroah-Hartman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1373920870.3475.200.camel@envy.home \
    --to=dvhart@linux.intel.com \
    --cc=andriy.shevchenko@linux.intel.com \
    --cc=davem@davemloft.net \
    --cc=hpa@zytor.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=peter.p.waskiewicz.jr@intel.com \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®